Newentor Q5 Wireless Weather Station User Manual
- June 1, 2024
- Newentor
Table of Contents
Newentor Q5 Wireless Weather Station
- Email[email protected]
- WhatsApp +8613410031201
- Facebook Search: Newentor
- Telegram NEWENTOR
The weather station is a functional product, if you have any questions about using it, contact us through the above ways to get support.
WEATHER STATION FEATURES
Package List
- Weather Station
- Outside Sensor
- Stickers
- User Manual
The device will consume a lot of battery power when the backlight is on. Like most other black-and-white screen devices, to extend battery life, its’ backlight will turn off after 15 seconds.
Appearance Description
- Ice alert ( 11th）
- Air pressure Trend ( 12th）
- Alarm clock 2 ( 9th）
- WWVB searching signal ( 8th）
- DST ( 7th）
- Alarm clock 1 ( 9th）
- Time zone ( 7th）
- AM/PM ( 7th）
- Time ( 7th）
- Date/Month ( 7th）
- Battery signal ( 13th）
- Temperature ( 13th）
- Comfort level ( 12th）
- Humidity ( 13th）
- Remote sensor location label
- Remote sensor 1 data ( 6th）
- Remote sensor 2 data ( 6th）
- Remote sensor 3 data ( 6th）
- Current Air pressure ( 7th）
- Weather forecast ( 11th）
- Week ( 7th）
- 7. Choose the correct time zone ( P, M, C, E) to set the time correctly.
- 12.There is 1℃ deviation when temperature is 0℃~40℃, while 2 ℃ in -9.9℃~0℃ or 40℃~50℃.
- 14. There is 5% deviation when humidity is 40%~80%, while 8% deviation in 20%~40% or 80%~95%.
- A1: Remote sensor temperature
- A2: Emission symbols
- A3: Channel number
- A4: Remote sensor humidity
- A5: Remote sensor low battery indicate（ 12th）
- B1: °C /°F unit transfer button
- B2: Manual transmitter button
- B3: Channel switch
- C1: Transmit indicating lamp
- C2: Wall mounting hole
- C3: Stand cover
- C4: Battery compartment cover
- C5: Battery compartment
- C6: Remote sensor battery
To make sure your remote sensor is more accurate, put it away from direct rain, sunny, or close to a place that will affect the sensing result.
Button Function
Button
Function
| ****
SET
| ****
ALARM
| ****
MEN
| ****
LIGHT
/SNZ
| ****
CH
| |
°C/°F/ －
---|---|---|---|---|---|---|---
Normal Mode
| ****
Press
| ****
/
| ****
Alarm time display
| ****
MAX/MIN
tempera- ture & humidity
| ****
Wake up backlight for 15s
| ****
Select channel
| ****
Turn on/off alarm 1/2
| ****
°C/°F
Switch
Hold
| ****
Time Setting
| ****
Set Alarm time
| Re-record MAX/MIN
tempera- ture & humidity
| ****
Wake up backlight for 15s
| ****
Channel searching
| ****
/
| ****
Start/- cancel WWVB
searching
Time Setting
| ****
Press
| Confirm and go next steps| ****
/
| ****
/
| ****
/
| ****
/
| ****
Increase
| ****
Decrease
Hold
| ****
/
| ****
/
| ****
/
| ****
/
| ****
/
| Increase Continu- ously| Increase Continu- ously
Alarm Setting
| ****
Press
| ****
/
| Confirm and go next steps| ****
/
| ****
/
| ****
/
| ****
Increase
| ****
Decrease
Hold
| ****
/
| ****
/
| ****
/
| ****
/
| ****
/
| Increase Contin- uously| Increase Contin- uously
Alarm Clock Goes Off
| ****
Press
| ****
Turn off the alarm
| ****
Turn off the alarm
| ****
Turn off the alarm
| ****
Snooze mode
| ****
Turn off the alarm
| ****
Turn off the alarm
| ****
Turn off the alarm
Hold
| ****
/
| ****
/
| ****
/
| ****
/
| ****
/
| ****
/
| ****
/
INITIAL OPERATION
- Open the Weather Station battery compartment cover.
- Insert 2 x AA batteries observing polarity and marks].
- When you insert the batteries, all icons on the LCD will light up for 3 seconds, and you will hear a beep tone, then detect indoor temperature & humidity.
- The Weather Station will start to make a connection to the outdoor remote sensor. This process lasts for a maximum of 3 minutes and will displayed by a flashing reception antenna symbol in the “OUTDOOR” display area on the receiver.
- Open the remote sensor battery compartment cover, push the channel switch to the “1” position, insert 2 x AA batteries observing polarity landmarks, and press the “TX” button of the remote sensor at the same time to connect the main unit, and close the battery cover.
- According to the same method, push the channel of the remote sensor switch to the “2” or “3” position to connect the main unit.
- After the receiver has created 3 remote sensor connections, it will enter the Radio control receive mode.
F.Y.I
If the Weather Station fails to receive a transmission from the outdoor remote sensor (“- -.-” display on the LCD), press the 【CH】button to select the channel, the number of selected channels will flash, then press and hold the 【CH】 button for 3 seconds, RF icon will be flashing，the weather station will reconnect the launch signal of the channel.
- There is 1℃ deviation when temperature is 0℃~40℃, while 2℃ in -40℃~0℃ or 40℃~70℃.
- There is 5% deviation when humidity is 40%~80%, while 8% deviation in 20%~40% or 80%~95%.
TIME SETTING
Set Time Manually
- Press and hold the【SET】button for 2 seconds, and the “ ON/OFF ” starts to flash. Now use and【°C/°F/－】buttons to set the radio control function ON or OFF.
- Press【SET】button to confirm your setting, and the 12/24HR starts to flash. Now use and【°C/°F/－】buttons to set the 12/24 hour mode you need.
- Press【SET】to confirm your setting, and the Time Zone start to flash, Now use and【°C/°F/－】buttons set the correct time zone (P/M/C/E).
- Press【SET】to confirm your setting, and the “DST ON/OFF” start to flash, Now use and【°C/°F/－】buttons set the DST ON or OFF.
- Press【SET】to confirm your setting, and the Hour starts to flash. Now use and【°C/°F/－】buttons to set the correct hour.
- Press【SET】to confirm your setting, and the Minute starts to flash. Now use and【°C/°F/－】buttons to set the correct minute.
- Press【SET】to confirm your setting, and the Month and Date icon starts to flash. Now use and【°C/°F/－】buttons to select the date display on Month/Date or Date/Month.
- Press【SET】to confirm your setting, the Year is displayed and starts to flash. Now use and【°C/°F/－】buttons to set the correct year.
- Press【SET】button to confirm your setting, and the Month starts to flash. Now use and【°C/°F/－】buttons to set the correct month.
- Press【SET】button to confirm your setting, and the Date starts to flash. Now use and【°C/°F/－】buttons to set the correct date.
- Press【SET】button to confirm your setting, and the Weather forecast Pattern starts to flash. Now use and【°C/°F/－】buttons to select the current weather pattern.
- Press【SET】button to confirm your setting, and the Air Pressure Unit will display and start to flash. Now use and【°C/°F/－】 buttons to choose the air pressure unit you need.
- Press【SET】button to confirm your setting, and the Air Pressure Value starts to flash. Now use and【°C/°F/－】buttons set to the local standard pressure value.
- Press【SET】button to confirm your setting and to end the setting procedures, then it will return to the normal mode.
F.Y.I.
- If there is no valid operation within 20 seconds, it will automatically return to normal time mode from the set mode.
- When adjusting the value, press and hold the or【°C/°F/－】 key to adjust continuously and quickly.
Set Time Automatically
- The clock will automatically search the WWVB signal after 3 minutes of any restart or changing of new batteries. Before searching WWVB, please set the correct Time Zone according to your location. When searching for WWVB, the radio mast icon will flash.
- At 1:00 /2:00 / 3:00 AM, the clock automatically carries out the synchronization procedure with the WWVB signal to correct any deviations to the exact time. If fails, the radio mast icon will disappear, and the system will automatically attempt another synchronization at the next full hour. This procedure will be repeated automatically up a total of 5 times.
- To start manual WWVB signal reception, choose the correct Time Zone first, then leave it alone until it returns to the normal mode. Press 【°C/°F/－】button for 3 seconds to start searching WWVB, the time and date will be set correctly after searching. If no signals are received within 7 minutes, the WWVB signal search will stop (the radio mast icon disappears) and start again at the next full hour.
- During RC reception， Press【°C/°F/－】button can stop searching WWVB signal.
F.Y.I.
- A flashing radio mast icon indicates that the WWVB signal reception has started.
- A continuously displayed radio mast icon indicates that the WWVB signal was received successfully.
- We recommend Placing the weather station at a minimum distance of 2.5 meters (8.2 feet) to all sources of interference, such as te revisions or computer monitors or switching power adapters.
- Radio reception is weaker in rooms with concrete walls (e.g.: in cellars) and in offices. In such extreme circumstances, place the weather station close to the window.
- During the RC receive mode, only the【Light/SNZ】and【°C/°F/－】 buttons have a function, other buttons are not functional. If you want to carry out other functions of operation, please press【°C/°F/－】 button to exit the RC receiving mode.
ALARM CLOCKS
Setting the Daily Alarms
- Press once button, LCD will display , press again to display , and press again to display , each to represent Alarm1ON (Alarm2 OFF), Alarm2 ON (Alarm1 OFF), Alarm1&Alarm2 ON. Press the button again to Alarm1 and Alarm2 all OFF (no“ ” and “ ”display).
- Press once【ALARM】button, LCD display alarm1 time, press 【ALARM】button again, LCD display alarm2 time, press【ALARM】 button again, return to time display.
- Press and hold the ALARM button for 3 seconds, until the Hour of the Alarm1 time starts to flash. Use the and【°C/°F/－】buttons to set the required hour.
- Press【ALARM】button to confirm your setting, and the Minute of the Alarm1 time starts to flash. Use the and【°C/°F/－】buttons to set the required minute.
- Press【ALARM】button to confirm your setting, and the Hour of the Alarm2 time starts to flash. Use the and【°C/°F/－】buttons to set the required hour.
- Press【ALARM】button to confirm your setting, and the Minute of the Alarm2 time starts to flash. Use the and【°C/°F/－】buttons to set the required Minute.
- Press【ALARM】button to confirm your setting and end the setting procedure.
F.Y.I.
- If there is no valid operation within 20 seconds, it will automatically return to normal time mode from the alarm time setting mode.
- When adjusting the value, press and hold the or【°C/°F/－】 key to adjust continuously and quickly.
- The alarm will sound for 2 minutes if you do not deactivate it by pressing any button. In this case, the alarm will be repeated automatically after 24 hours.
- The rising alarm sound (crescendo) changes the volume 4 times whilst the alarm signal is heard.
Switching OFF the Alarm Signal
- When the alarm is ringing, press any button except the【Light/SNZ】 button to stop the alarm signal. It is not necessary to reactivate the alarm. It will ring again this time the next day.
Snooze Function
- When the alarm is ringing, press the【Light/SNZ】button the alarm mode to get to snooze mode. The alarm signal sounds again after 8 minutes.
Query Maximum/minimum numerical value
- When the temperature/humidity is shown on the LCD, the weather station begins to record the temperature/humidity maximum and minimum numerical values.
- Press【MEM】button and the LCD will display the maximum value of temperature/ humidity. Press【MEM】button again, the LCD will display the minimum value of temperature/humidity.
- At the same time, there are “MAX” or “MIN” displayed on the LCD.
- The temperature/humidity maximum/minimum value will re-record when press and hold【MEM】button 3 seconds.
- The memory value of the day will be automatically cleared at every 0:00 am.
F.Y.I.
- If the temperature reading is below the measuring range, the LL.L will be displayed. If the temperature reading is above the measuring range, the HH.H will be displayed.
°C /°F UNIT TRANSFER
- Press the【°C/°F/－】button to select ℃ or ℉ units.
ICE ALERT
- The ice alert symbol will appear and flash when the outdoor temperature at –1℃ to + 3℃ or +30.2℉ to + 37.4℉.
WEATHER FORECAST FUNCTION
- The weather symbols indicate the weather fluctuation over the next 6-12 hours, not the current weather.
- Please take the weather forecast from your local weather forecasting service into account as well as the forecast from your weather station. If there are discrepancies between the information from your device and from the local weather forecasting service, please take the advice of the latter as authoritative.
- The weather forecast is calculated from the evaluation of fluctuations in the barometric pressure and may deviate from the actual weather conditions.
The weather station displays the following weather symbols:
COMFORT LEVEL
- The temperature and humidity is dry (When the humidity is below 40%).
- The temperature and humidity is comfortable (When the temperature in 20~28℃ and the humidity is 40~70%).
- The temperature and humidity is wet (When the humidity is above 70%).
F.Y.I.
- When the temperature is not 20~28℃ and the humidity is 40~70%, the comfort level icon will not be displayed.
BAROMETRIC PRESSURE TREND DISPLAY
- The barometric pressure is rising more than 2 hPa.
- The barometric pressure is dropping more than 2 hPa.
- If there is no arrow trend, it means the barometric pressure does not change more than 2 hPa in 1 hour.
BACKGROUND LIGHTING
- Press the【Light/SNZ】button and the backlight will light up for 15 seconds.
LOW BATTERY INDICATE
- If the battery icon “ ” appears, the batteries in the outdoor sensor should be replaced as soon as possible.
PRODUCT SPECIFICATION
- LCD screen size: 5.2 inches x 3.5 inches
- Perpetual Calendar up to year 2099
- Humidity: Indoor & Outdoor measurement range: 20%RH~95%RH （5% deviation）
Temperature measurement range（1°C deviation）:
- Indoor: -9.9°C(14.2°F)~50°C(122°F)
- Outdoor: -25°C(-13°F)~50°C(122°F)
Wireless Outdoor Sensor:
- 433.92MHz RF transmitting frequency
- 60m/200ft transmission rang in an open area
Power Supply:
- Weather Station: Battery: 2 x LR06AA (Not including)
- Wireless Outdoor Sensor: 2 x LR06AA (Not including)
FREQUENTLY ASKED QUESTIONS
What are the recommended uses for the Newentor Q5 Wireless Weather Station?
The Newentor Q5 Wireless Weather Station is recommended for use in offices, gardens, and homes.
What specific functions does the Newentor Q5 Wireless Weather Station provide?
The Newentor Q5 Wireless Weather Station provides information on temperature, humidity, time, barometric pressure, and date.
What is the power source for the Newentor Q5 Wireless Weather Station?
The Newentor Q5 Wireless Weather Station is battery-powered, requiring 2 AA batteries for operation.
What special features does the Newentor Q5 Wireless Weather Station offer?
The Newentor Q5 Wireless Weather Station features a large display, alarm functionality, and is weather-resistant. It also functions as a clock.
What material is the Newentor Q5 Wireless Weather Station made of?
The Newentor Q5 Wireless Weather Station is made of Acrylonitrile Butadiene Styrene (ABS).
What are the dimensions of the Newentor Q5 Wireless Weather Station?
The Newentor Q5 Wireless Weather Station measures 1.2 inches in depth, 6.3 inches in width, and 4.5 inches in height.
What type of display does the Newentor Q5 Wireless Weather Station use?
The Newentor Q5 Wireless Weather Station utilizes an LCD display.
How much does the Newentor Q5 Wireless Weather Station weigh?
The Newentor Q5 Wireless Weather Station weighs 1.06 pounds.
Who is the manufacturer of the Newentor Q5 Wireless Weather Station?
The Newentor Q5 Wireless Weather Station is manufactured by Newentor.
What is the item model number of the Newentor Q5 Wireless Weather Station?
The item model number of the Newentor Q5 Wireless Weather Station is Q5.
What is the warranty description for the Newentor Q5 Wireless Weather Station?
The Newentor Q5 Wireless Weather Station comes with a manufacturer warranty for 1 year from the date of purchase.
Why is my Newentor Q5 Wireless Weather Station not displaying any data?
Check if the batteries are inserted correctly and if they have enough power. Also, ensure that the outdoor sensor is properly connected and within the transmission range of the main unit.
Why is the humidity reading fluctuating on my Newentor Q5 Wireless Weather Station?
Ensure that the outdoor sensor is placed in a well-ventilated area away from sources of moisture or humidity, such as bathrooms or kitchens. Additionally, check if the sensor is clean and free from any debris that may affect its accuracy.
My Newentor Q5 Wireless Weather Station is not connecting to the outdoor sensor. What should I do?
Try resetting both the main unit and the outdoor sensor by removing and reinserting the batteries. Make sure they are both set to the same channel or frequency, and that there are no obstructions blocking the signal between them.
The display on my Newentor Q5 Wireless Weather Station is blank. How can I troubleshoot this issue?
Check if the power adapter is properly plugged in and if there is electricity supply to the outlet. If using batteries, replace them with fresh ones and ensure they are inserted correctly.
DOWNLOAD THE PDF LINK:Newentor Q5 Wireless Weather Station User Manual
REFERENCE:Newentor Q5 Wireless Weather Station User Manual- Device.Report