MWS DAFQ8SVHLQO Flexo Beard Trimmer User Manual
- June 17, 2024
- MWS
Table of Contents
MWS DAFQ8SVHLQO Flexo Beard Trimmer
Specifications
- Product Name: Cordless Electric Shaver
- Power Source: Rechargeable Battery
- Charging Time: 60 minutes for a full charge
- Usage: Shaving and trimming facial hair
Charging Instructions
- Ensure the device is turned off before charging.
- Insert the power cord into the device’s power port.
- Connect the adapter (or power cord) to a household power outlet.
- The device can be powered directly by the adapter through the main power.
- When the charging connection is normal, the charging indicator light will illuminate. If not, retry to ensure proper charging.
- A full charge takes 60 minutes.
Usage Instructions
- Ensure the device is turned off before use. Check that the blade or foil is undamaged.
- Press the power button to turn on the device.
- Recommend shaving or trimming ten minutes after waking up and avoid shaving with facial edema.
- Shave or trim against the direction of hair growth, keeping the blade perpendicular to the skin for better cutting results.
- Adjust the motor power setting based on your beard density and nature for optimal performance. Default setting is Shift II.
- To lock the device for safety or during travel, press and hold the power button for 3 seconds until the lock symbol flashes on the LED panel.
Parts list
- Bused blade
- Moving blade
- Regulator
- OFF Dumon
- ALED Dislay
- Poston comg t
- Polison comb a
- Brunh 10 Lube 1
- 138 cord
User Manual
- If the blade or foil is deformed or damaged, please do not use it again, or it may cause skin irritation or wounds.
- The blade or foil has fi xed life. In order to obtain best result, we recommend you replace the blade or foil regularly.
- Please do not charge at the place with temperature lower than 0 °C (104 °F) , direct sunlight or near heat or humid source.
- Please use the matching adaptor (or power cord) or charging base in the package if it has.
- Please dry the appliance before charging.
- Keep the appliance far away from water source, keep your hands dry during the course of charging.
- When you unplug the adapter (or power cord) from the main power, pull too hard may damage the appliance.
- Store the adaptor to dry place to avoid damage.
- Do not pull, twist or bend the adaptor (or power cord) seriously.
- Do not twist the power cord fi rmly to the appliance.
- Blade or foil improper operation will result easy damage. To avoid man-made damage, please do not use damaged blade or foil.
- Please do not remove the shell of the appliance, or the appliance may be damaged for improper operation; and more seriously, removing the shell while connected with main power may cause electric shock
- Do not charge in the shower room because the humidity may cause electric shock.
- The appliance does not apply to animal or other purposes.
- Keep the appliance out of reach of children.
- Keep the Instruction Manual at safe place.
- Please contact authorized after-sale service for any maintenance question or damage problem.
- Please keep the appliance at dry place and make sure the appliance is dry if the appliance is kept unused for a long time.
- Children under 8 years are not allowed to use this appliance, persons with physiological malady or mental disease or persons lack of experience shall be supervised to operate this appliance, and must be informed
- the relevant dangers before operating.
- It is not a toy, Children is not allowed to play with the appliance.
- Children shall not clean and repair the appliance without supervision.
- The discarded battery must be removed from the appliance.
- Before removing the battery, please unplug the adaptor (or power cord) from the main power, make sure the product has been disconnected, otherwise it will likely cause electric shock!
- The battery must be disposed safely to government assigned position.
- Before charging, please plug the adaptor (or power cord) into a requested power socket as stipulated in the rating label; make sure that the socket is dry and without water; and please keep your hands dry for charging.
- Please do not place heavy object on the adaptor (or power cord), and keep the adaptor(or power cord) well without damage or deform.
Warning
- Please do not use damaged, deformed or broken adaptor, including its cord.
CORRECT DISPOSAL OF THIS APPLIANCE.
- This marking indicates that this product should not be disposed with other household waste throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal,and to promote the recycling & sustainable reuse of material, please use the return and collection system or please contact the retailer, where the appliance was purchased, for correct disposal. They can take this appliance for environmentally safe recycling.
- Please read the safe instruction carefully before using appliance.|
- Important : During the course of shaving or trimming, please do not apply the blade or foil too heavy on your skin, which may cause blade or foil damaged, and even hurt your skin. (such as burning sensation, numbness or pain).
How to charge
- Before charging, please assure the appliance is turned off .
- Insert the power cord to the power terminal of the appliance. (Fig. A1)
- Plug the adaptor (or power cord) into household main socket. (Fig. A2)
- This appliance has the function of Cord & Cordless use. It can be driven by main power directly with the adaptor.When the charge connection is normal, the appliance indicating light turns on, the charge indicating
- light must be holding on during the course of charge. If the light fails to turn on, please try again and make sure normal charge.
- It costs 60 minutes to charge an empty battery to full.
How to us
- Before using, please make sure the appliance is turned off . Please check and make sure the blade or foil is not damaged or with other foreign matters.
- Press the power switch to turn on the appliance.
- Recommend shave or trim ten minutes after wake up and confi rm no edema of face.
- Please shave or trim against the growth direction of beard, keep the blade or foil is perpendicular to skin, such operation is aim to obtain better cutting eff ect. (Fig. A3)
- This appliance has motor power output adjusting system. Please choose suitable output shift according to your beard density, beard nature and etc. to achieve the best shave or trim performance. The default setting is Shift II, press the Output Control Button to change the output shift. (Fig. B1)
- This appliance has lock function. If the appliance is not being used for long time, or the appliance will be carried for travel, or to secure it won’t be turned on by Children, please lock the appliance. To lock the appliance, please press and hold the on/off button for 3 seconds till a lock symbol blinking in the LED panel. After the appliance is locked, the appliance won’t be turned on by pressing the on/off button shortly. To unlock, please press and hold the on/off button for 3 seconds again. (Fig. B2)
How to clean
- The appliance will be automatically shut off when the battery is power off and can’t be turned on again for working if it is not recharged and connected to the main power. 1.
- Ensure the appliance is turned off and the power cord is cut off .
- Please clean the appliance surface with wet cloth, do not use cleaner or chemical substance.
- Wipe the appliance surface with dry cloth, do not use blower or other dry heat exchanger.
- The appliance should not be cleaned by immersing into water.
- Take off the head and pour out the hair on the condition that hair accumulated in the head, then brush away the hair from the blade or foil. (Fig. E1)
- Rinse the head of the shaver in running water. (Fig. E2)
LED display details
The LED system will be refreshed (all symbols & numbers lighted then all shut
off ) when the appliance is connected to the main power. After that, charging
will be started with battery symbol blinking in the LED display and the number
will be increasing from 0 to 100 during the charging. The number of battery
capacity in the LED shows 100 when battery is fully charged. And LED system
will be shut off some minutes later after the battery is fully charged. (Fig.
D1)
The LED system will be refreshed when the appliance is turned on, and the
numbers showing the battery capacity will slowly decreased from 100 to 0 while
using. A battery symbol will be blinking when the battery capacity number
decreased to 10; the appliance will be automatically shut off when the number
decreased to 0 and can’t be turned on again for working if it is not recharged
or connected to the main power. (Fig. D2)
Comments
Please lubriate the blade if the drop oil icon reminding on the LED display when the appliance is power on. Please don’t use the appliance until it is lubricated. (Fig. D3)
- If feel appliance become dull during the course of shaving or trimming, (obvious pulling feel), you need to replace blade or foil.
- Please clean the mustache bit in the blade or foil with brush, or it may cause service life reduce of blade or foil or bad eff ect.
- Whether you use this appliance all the time or not, please charge at least once every 3 months, ensure the battery activation, as to prolong the service life of battery.
- Please remove the battery when you discard the product. (Fig. F1)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>