Cardinal DETECTO 850F Series Portable Platform Scales Owner’s Manual

Cardinal DETECTO 850F Series Portable Platform Scales

Product Information

• The product is the Detecto Portable Platform Scales, specifically the Digital Type Series 850F. It is manufactured by Cardinal Scale MFG. CO. and the owner’s manual is labeled as Revision H from October 2006. The company is based in Webb City, MO and can be contacted at 417-673-4631 or through their website at www.cardinalscale.com.
• The manual is printed in the USA.

Product Usage Instructions

1. Assemble each wheel to the scale base using four 5/8-11 x 3 1/2 hex head bolts, four sleeves, and eight 5/8 flat washers. Tighten the bolt against the sleeve to secure the wheel.
2. Insert the column into the scale base assembly and secure it with 3/8 split lock washers and 3/8-16 hex nuts. Ensure that the Detecto decal is facing toward the platform.
3. Attach the steelyard hanger to the long end of the shock absorber assembly.
4. Partially lower the shock absorber assembly into the column with the open side of the hanger facing towards the back of the scale.
5. Hook the short end of the shock absorber assembly to one end of the load cell assembly. Handle the load cell with care and avoid dropping, bending, or twisting it.
6. Slide the grommet away from the load cell to the other end of the cable.
7. Slide the grommet into the slot at the top of the column. The slot should be on the back side of the column.
8. Lower the load cell and shock absorber assemblies into the column. Ensure that the hanger drops through the opening in the scale base assembly.
9. Fasten the top hook bolt of the load cell assembly to the] column hanger.
10. Attach the steelyard hanger to the nose iron pivot.
11. Pull out the excess load cell cable in the column, leaving enough slack to avoid side pull on the load cell.
12. Check the scale platform for ease of movement. If there is rubbing or binding, ensure that the scale has been correctly assembled. Do not attempt to adjust the long lever nose iron;contact your Detecto dealer for assistance.

• Thank you for purchasing our Detecto Model 850F Series Portable Digital Scale. It has been manufactured with Detecto quality and reliability at our factory in Webb City, Missouri U.S.A. This scale has been calibrated and tested before leaving our factory to insure accuracy and dependability for years to come.
• When removing the scale from its packing, inspect it for signs of damage such as exterior dents and scratches. Keep carton and packing material for return shipment if it should become necessary. It is the responsibility of the purchaser to file all claims for any damages or loss incurred during transit, unless this responsibility has been accepted by the Seller in its proposal.

NOTICE

All rights reserved. Reproduction or use without written, expressed permission, of editorial or pictorial content, in any manner, is prohibited. No patent liability is assumed with respect to the use of the information contained herein. While every precaution has been taken in the preparation of this book, the Seller assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. All instructions and diagrams have been checked for accuracy and ease of application, however, success and safety in working with tools depend a great extent upon the individual accuracy, skill and caution. For this reason, the Seller is not able to guarantee the result of any procedure contained herein. Nor can they assume responsibility for any damage to property or injury to persons occasioned from the procedures. Persons engaging the procedures do so entirely at their own risk.

885XF
SCALE BASE AND COLUMN ASSEMBLY INSTRUCTIONS

• Refer to Figure No.1 and follow the instructions provided below for scale assembly.

1. Assemble each wheel to the scale base with four 5/8-11 x 3 1/2″ hex head bolts, four sleeves and eight 5/8 flat washers. To secure the wheel, tighten the bolt against the sleeve to scale base.

2. Insert column (B) into scale base assembly (A) and secure the with 3/8 split lock washers and 3/8-16 hex nuts.
   NOTE : Detecto decal should be facing toward platform.

3. Attach the steelyard hanger (D) to the long end of the shock absorber assembly (E).

4. Partially lower the shock absorber assembly (E) into the column (B) with the open side of the hanger (D) facing towards the back of the scale.

5. Hook the short end of the shock absorber assembly (E) to one end of the load cell assembly (F).
   NOTE : Handle load cell with care!! DO NOT drop, bend or twist.

6. Slide the grommet (F1) away from the load cell to the other end of the cable.

7. Slide the grommet (F1) into the slot at the top of the column. NOTE: The slot should be on the back side of the column.

8. Lower the load cell and shock absorber assemblies into the column. The hanger (D) must drop through the opening in the scale base assembly

9. Fasten the top hook bolt of the load cell assembly (F) to the column hanger (B1).

10. Attach the steelyard hanger (D) to the nose iron pivot (A1).

11. Pull out the excess load cell cable in the column leaving enough slack in the cable so as not to have any side pull on the load cell.

12. Before continuing to Step 13, check scale platform for ease of movement. If rubbing or binding, check to make sure the scale has been correctly assembled. If it has been properly assembled, DO NOT attempt to adjust the long lever nose iron (A1), contact your Detecto dealer. The nose iron has been preset at the factory. Note: Scale set up and operation must be on a level surface. The scale is level when the air bubble is in the target on the bulls-eye level.

13. Scale base and column assembly is complete. Refer to the Digital Indicator Instructions which apply to your model of scale for further assembly instructions. Or refer to the information below for load cell wiring identification of the 850F Model
    

Figure No. 1 Scale Base and Column Assembly Diagram Models 585XF and 885XF

Color Function

• Green +Exc
• Black -Exc
• Red +Sig
• White -Sig
• Shield

585XF
Digital Weight Indicator Assembly Instructions

1. Assemble column top plate assembly (108) to column using four 1/4-20 x 1/2″ truss head screws and four 1/4 split lock washers (103, 104). Assemble gimbal to column top plate assembly using two #10-32 x 1/2″ hex head screws and two #10 split lock washers (109, 110).
2. Mount the digital weight indicator (101) to the gimbal (102) and secure with two knobs and two washers (105, 107). NOTE: Do not tighten these knobs tight. The indicator should be free to be adjusted later at the operator’s convenience.

Model 585XF

|
| | Parts List

Item No.                    Part No.

|

Part Name                                          Quantity

101| 205/210| Digital Weight Indicator                            1
102| 8200-D022-08| Gimbal 1
103| 6021-1423| 1/4-20 x 1/2″ Truss Head Screw              4
104| 6024-0039| 1/4 Split Lock Washer                              4
105| 6540-1053| Enclosure Knob                                        2
107| 6024-0083| Washer                                                      2
108| 430GR8630| Top Plate Assembly                                 1
109| 6021-1002| Hex Head Screw #10-32 x 1/2″               2
110| 6024-0037| #10 Lock Washer                                      2
111| 6540-1004| Rubber Feet                                             4
112| 6540-1008| Spacer                                                       2

585XF-758
Digital Weight Indicator Assembly Instructions

1. Assemble column top plate assembly (108) to column using four 1/4-20 x 1/2″ truss head screws and four 1/4 split lock washers (103, 104). Assemble gimbal to column top plate assembly using two #10-32 x 1/2″ hex head screws and two #10 split lock washers (109, 110).
2. Mount the digital weight indicator (101) to the gimbal (102) and secure with two knobs and two washers (105, 107). NOTE: Do not tighten these knobs tight. The indicator should be free to be adjusted later at the operator’s convenience.
3. Connect and secure the load cell cable into the back of the indicator via the 9 pin connector. Refer to Indicator Manual 8555-M021-O1.
4. Refer to Indicator Manual 8555-M021-O1 for setup instructions.

Figure No. 3 Assembly Parts Diagram Model 585XF-758

Parts List

Item No. Part No. Part Name Quantity

BASE ASSEMBLY

Figure No. 4 Scale Base and Parts Diagram Models 585XF and] 885XF

Item No.

| 585XF and 885XF

Series Part No.

| ****

Part Name

| ****

Quantity

---|---|---|---
1| 0066-C017-08| Deck Plate| 1
2| 0066-D012-0A| Weighbridge Assembly| 1
3| 0066-D006-0A| Long Lever Assembly| 1
4| 0066-D007-0A| Short Lever Assembly| 1
5| 0066-B004-0A| Long Hanger Assembly| 2
6| 0066-B005-0A| Short Hanger Assembly| 2
7| 0066-B008-0A| Center Hanger Assembly| 1
8| 0066-B003-08| Bearing| 4
9| 0066-B010-0A| Nose Iron Assembly| 1
10| 6021-1458| 5/16 -18UNC x 1 3/4″ Hex head Bolt| 1
11| 6021-1833| 5/16 -18UNC x 4″ Hex head Bolt| 1
12| 0066-D002-0A| Base Weldment| 1
13| 0066-B199-08| 5″ Rubber Wheel| 4
14| 6007-0240| 5/8 -11 x 3 1/2″ Hex head Bolt| 4
15| 0066-B200-0A| Sleeve| 4
16| 6024-0015| 5/8 Flat Washer| 8
17| 6690-0001| Bulls-eye Level| 1

COLUMN ASSEMBLY

Figure No. 5 Column Assembly Parts Diagram

Parts List

STATEMENT OF LIMITED WARRANTY

• Detecto Scale warrants its equipment to be free from defects in material and workmanship as follows: Detecto warrants to the original purchaser only that it will repair or replace any part of equipment which is defective in material or workmanship for a period of one (1) year from date of shipment. Detecto shall be the sole judge of what constitutes a defect.
• During the first ninety (90) day s Detecto may choose to supply all necessary replacement parts and service during normal weekday working hours at no charge to the buyer.
• After the first ninety (90) days Detecto will supply parts and service at the job site provided the owner agrees to pay the Dealer for all travel time, including mileage and test equipment, as well as any expenses incurred over the direct labor of the technician at the job site. This limited warranty honors only labor performed by Detecto authorized dealers.
• This warranty does not apply to peripheral equipment not manufactured by Detecto; this equipment will be covered by certain manufacturer’s warranty only.
• This warranty does not include replacement of expendable or consumable parts. This does not apply to any item which has deteriorated or damaged due to wear, accident, misuse, abuse, improper line voltage, overloading, theft, lightning, fire, water or acts of God, or due to extended storage or exposure while in purchaser’s possession.
• This warranty does not apply to maintenance service. Purchased parts will have a ninety (90) day repair or replacement warranty only.
• Detecto may require components be returned to the factory; they must be properly packed and shipping charges prepaid.
• A return authorization number must be obtained for all returns and marked on the outside of all returned packages.
• Detecto accepts no responsibility for loss or damage in transit.

STATEMENT OF LIMITED WARRANTY

Conditions Which Void Limited Warranty

1. This warranty shall not apply to equipment which
   • A.) Has been tampered with, defaced, mishandled or have had repairs and modifications not authorized by Detecto.
   • B.) Has had serial number altered, defaced, or removed.
   • C.) Has not been grounded according to Detecto’s recommended

Freight Carrier Damage

• Claims for equipment damaged in transit must be referred to the freight carrier in accordance with freight carrier regulations.
• This warranty sets forth the extent of our liability for breach of any warranty or deficiency in connection with the sale or use of the product. Detecto will not be liable for consequential damages of any nature, including but not limited to, loss of profit, delays or expenses, whether based on tort or contract. Detecto reserves the right to incorporate improvements in material and design without notice and is not obligated to incorporate improvements in equipment previously manufactured.
• The foregoing is in lieu of all other warranties, express or implied including any warranty that extends beyond the description of the product including any warranty of merchantability or fitness for a particular purpose.
• This warranty covers only those Detecto products installed in the forty-eight (48) contiguous continental United States.

Ph. 800-641-2008
E-mail : [email protected]
203 E. Daugherty Webb City, MO 6487

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>