OM IM031 Digital ED 90mm Macro Instruction Manual
- June 14, 2024
- OM
Table of Contents
OM IM031 Digital ED 90mm Macro
The following importer description applies to products imported into the EU directly by OM Digital Solutions GmbH only. OM Digital Solutions GmbH Domstraße 10, 20095 Hamburg, Germany Manufactured by OM Digital Solutions Corporation 49-3 Takakura-machi, Hachioji-shi, Tokyo 192-0033, Japan The following importer description applies to products imported into the UK directly by OM Digital Solutions GmbH – UK Branch only. OM Digital Solutions GmbH – UK Branch 16 Upper Woburn Place, London, WC1H 0AF.
Thank you for purchasing this product. To ensure your safety, please read this instruction manual before use, and keep it handy for future reference.
Name of parts
- Lens hood
- Focus ring
- Mount Index
- Focus limiter switch
- IS switch
- L-Fn button
- Electrical contacts
- Distance indicator
- Magnification indicator
Focus ring
Slide to change the focus method (Fig. 1) (manual focus clutch mechanism).
- Position in which distance or magnification indicator cannot be seen (Fig. 1-A)
- The lens will operate in the focus mode set by the camera.
- Position in which distance and magnification indicators can be seen (Fig. 1-B)
- The lens will operate in the MF mode, regardless of the focus mode set by the camera.
- Focus by rotating the lens focus ring.
- The focus will be within the range of the shooting distance set with the focus limiter switch.
S-MACRO
| Subject distance (m) | 0.50 | 0.33 | 0.25 | 0.23 | 0.224 |
|---|---|---|---|---|---|
| Magnification | 0.25x | 0.5x | 1x | 1.5x | 2x |
| Effective f-number | 5.0 | 5.6 | 6.3 | 7.1 | 8.0 |
| Exposure compensation | 0 | +1/3 | +2/3 | +1 | +1 1/3 |
0.25-0.5m / (c): 0.25m-)
| Subject distance (m) | 0.50 | 0.33 | 0.25 |
|---|---|---|---|
| Magnification | 0.25x | 0.5x | 1x |
| Effective f-number | 3.5 | 4.0 | 4.5 |
| Exposure compensation | 0 | +1/3 | +2/3 |
Attaching the hood (Fig. 2)
Storing the hood (Fig. 3)
To remove the hood, rotate it while pressing the release button.
IS switch
Turn image stabilization (IS) on or off.
ON: Stabilizing functions in the lens and camera operation. The IS operates
according to the IS setting in the camera.
OFF: Stabilizing functions in both the lens and The camera are off.
L-Fn button
The AF stops functioning when the button is pressed. You may be able to assign
other functions depending on your camera. For details, see the instruction
manual that came with your camera.
Focus limiter switch
Sets the range of the photographing distance. Focusing is done within the
range that is set. If performing exposure compensation using an external light
meter, refer to the table below. Exposure compensation is unnecessary when
using the camera’s automatic exposure mode. (a): S-MACRO 0.25-0.5m / (c):
0.25m-) When the focus limiter switch is in position (c), the shooting
distance is 0.25m-)
Notes on Shooting
Please use the latest firmware for the camera. Operations will vary depending
on the camera. For more information, please visit our home page. Contact the
other manufacturer to mount the lens on another manufacturer’s digital camera.
- Edges of pictures may be cut off if more than one filter is used or if a thick filter is used.
- When using a flash, the flashlight may be blocked by the lens body, lens hood, etc.
- Usage conditions may lower the number of images that can be captured.
- Do not touch electric contacts on cameras.
- If autofocus (AF) is unavailable, check the sliding position of the focus ring.
- The focus distance may change when the focusing method is switched from MF to AF/ MF and then back to MF. Readjust the focus distance.
- The distance and magnification indicators are intended as a guide only.
Main Specifications
This lens can be used with an M.ZUIKO teleconverter. For more information on compatible teleconverters and notes on combining them with the lens, please visit our home page Specifications are subject to change without any notice or obligation on the part of the manufacturer. Maintenance Blow the dust off the lens with a commercially available blower. For the lens, wipe gently with a lens cleaning paper. Precautions: Be Sure to Read the Following.
Warnings: Safety Precautions
Do not view the sun through the lens. It may cause blindness or vision
impairment. Do not leave the lens without the cap. If solar light is converged
through the lens, a fire may result. Do not point the camera lens at the sun.
Sunlight will converge in the lens and focus inside the camera, possibly
causing a malfunction or fire. Micro Four Thirds and the Micro Four Thirds
logo are trademarks or registered trademarks of OM Digital Solutions
Corporation.
FCC Notice
This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used per the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- Only the USB cable supplied by the manufacturer should be used to connect the camera to USB-enabled personal computers.
FCC Caution
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment For
customers in North America, Central America, South America and the Caribbean
Declaration of Conformity
Model Number: IM031
Trade Name: OM SYSTEM
Responsible Party
Address: 306 South New Street, Suite 110 Bethlehem, PA 18015, USA
Telephone Number: 1-800-622-6372
Tested To Comply With FCC Standards
FOR HOME OR OFFICE USE
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
For customers in Europe (excluding
England, Wales and Scotland) This symbol [crossed-out wheeled bin WEEE Annex
IV] indicates a separate collection of waste electrical and electronic
equipment in the EU countries. Please do not throw the equipment
into the domestic refuse. Please use the return and collection systems
available in your country for the disposal of this product. The manufacturer
will not be held liable for violations of local regulations arising from the
use of this product outside the country or region of purchase. The software in
this lens may include third-party software. Any third-party software is
subject to the terms and conditions, imposed by the owners or licensors of
that software, under which software is provided to you.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>