SANUS BF16 Wood Speaker Stands User Guide

May 16, 2024
SANUS

SANUS Logo BF16, BF24, BF31
(6901-170158<00>)

BF16 Wood Speaker Stands

IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS
Thank you for choosing Sanus Systems Basic Foundations. The BF24 and 31are designed to support speakers weighing up to 9 kg (20 lbs.) and the BF16 will support speakers weigning up to 11.33 kg (25 lbs) each.
CAUTION: Do not use this product for any purpose not explicitly specified by Sanus Systems. Improper installation may cause property damage or personal injury. If you do not understand these directions, or have doubts about the safety of the installation, contact Sanus Systems Customer Service or call a qualified contractor. Sanus Systems is not responsible for damage or injury caused by incorrect mounting, assembly, or use.
WARNING! This product contains small items that could be a choking hazard if swallowed. Keep these items away from young children!
Hardware and procedures for multiple mounting configurations are included. When you see this symbol, choose the correct configuration to suit your needs. Not all hardware included will be used.

SANUS BF16 Wood Speaker Stands - Supplied Parts and
Hardware Supplied Parts and Hardware

Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the item to your dealer; contact Sanus Systems Customer Service. Never use damaged parts!

SANUS BF16 Wood Speaker Stands - Supplied Parts and Hardware
2

Assemble pillars [06] to base [04].
CAUTION: Avoid potential personal injuries and property damage! Do not use power drivers to tighten screws. Do not overtighten wood screws.

SANUS BF16 Wood Speaker Stands - Assemble 2

Attach top plate [05] to pillars [06]. Position the top plate [05] so that the pair of countersunk holes faces the front of the stand, as shown.
CAUTION: Avoid potential personal injuries and property damage! Do not use power drivers to tighten screws. Do not overtighten wood screws.

SANUS BF16 Wood Speaker Stands - Screw

Attach isolation pads [01] and carpet spikes [03].

SANUS BF16 Wood Speaker Stands - Attach isolation pads

Wire management. The BF31 will require two wire covers.

SANUS BF16 Wood Speaker Stands - management

Milestone AV Technologies and its affiliated corporations and subsidiaries (collectively, “Milestone”), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions, or variations. Nor does it provide for every possible contingency in connection with the installation or use of this product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, expressed or implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document.

SANUS LogoSanus Systems 2221 Hwy 36 West, Saint Paul, MN 55113 USA • sanus.com
Americas: 800-359-5520651-484-7988 [email protected]
Europe, Middle East, and Africa: 31 (0) 40 26 68 619 • [email protected]
Asia Pacific: 86 755 8996 9226 • 800 999 6688 (mainland China only) • [email protected]
©2009 Milestone AV Technologies. All rights reserved. Sanus is a division of Milestone.
ll other brand names or marks are used for identification purposes and are trademarks of their respective owners.
6901-170158 <00>

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

SANUS User Manuals

Related Manuals