nevir NVR-8078-32RD2S-SMA-N LED TV User Manual
- June 14, 2024
- nevir
Table of Contents
LED TV
NVR-8078-32RD2S-SMA-N
32″ (81cm) DLED HD TELEVISION
USER MANUAL
Installation
(1) Locate the TV in a room where direct light does not strike the screen.
Total darkness or a reflection on the picture screen can cause eyestrain. Soft
and indirect lighting is recommended for comfortable viewing.
(2) Allow enough space between the receiver and the wall to permit
ventilation.
(3) Avoid excessively warm locations to prevent possible damage to the cabinet
or premature component failure.
(4) Do not install the TV in a location near heat sources such as radiator,
air ducts, direct sunlight, or in a place somewhere like close compartment and
close area. Do not cover the ventilation openings when using the TV.
(5) The indicator light will last about 30 seconds to go out after cutting off
the electricity, during this period, you cannot repower it on until the
indicator light goes out, thanks a lot for your attention!
(6) To prevent the spread of fire, keep candles or other open flames away from
this product at all times.
Warning
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO AVOID THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER- SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol is intended to alert the user to avoid the risk of electric shock, do not disassemble this equipment by anyone except a qualified service personnel.
This symbol is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying the equipment.
This equipment is a Class II or double insulated electrical
appliance. It has been designed in such a way that it does not require a
safety connection to electrical earth.
Caution
Caution
High voltages are used in the operation of this product.
Do not open the product’s casing. Refer servicing to qualified service
personnel.
Caution
To prevent fire or electrical shock hazard, do not expose the main unit to
rain or moisture, do not place objects filled with liquids, such as vases, on
the apparatus.
Caution
Do not drop or push objects into the television cabinet slots or openings.
Never spill any kind of liquid on the television receiver.
Caution
Avoid exposing the main unit to direct sunlight and other sources of heat. Do
not stand the television receiver directly on other products which give off
heat. E. g. video cassette players, Audio amplifiers. Do not block the
ventilation holes in the back cover. Ventilation is essential to prevent
failure of electrical component. Do not squash power supply cord under the
main unit or other heavy objects.
Caution
Never stand on, lean on, push suddenly the product or its stand. You should
Pay special attention to children.
Caution
Do not place the main unit on an unstable cart stand, shelf or table. Serious
injury to an individual, and damage to the television, may result if it should
fall.
Caution
When the product is not used for an extended period of time it is advisable to
disconnect the AC power cord from the AC outlet.
Caution
The LED panel used in this product is made of glass. Therefore, it can break
when the product is dropped or applied with impact. Be careful not to be
injured by broken glass pieces in case the LED panel breaks.
Main unit description
Control Panel Button Function
SOURCE : Select the input signal.
MENU : Press to select the main menu.
VOL+ : Volume up.
VOL- : Volume down.
CH+ : TV channel up.
CH- : TV channel down.
POWER : Turn the TV on or off.
TV Terminal Connections
Connector
| Function|
Description
---|---|---
|
COAX
| Connection for Digital Coaxial input for Audio Amplifier.
|
HDMI
| Connect to equipment with HDMI output.
|
RJ45
| Connect to the Internet.
|
DVB-T2
| Antenna Input terminal
Connect to equipment with antenna output or wall antenna socket.
|
DVB-S2
| DVB-S2 Input Terminal. Connect to LNBF.
|
CI
| Slot for Common Interface device(Decoder).
|
AV IN
| Video and Audio(L/R)input Terminal.
Audio(L/R)can be used as YPbPr Audio input.
|
USB
| Insert USB.
|
EARPHONE
| Connects audio amplifier or other device with that audio input.
|
Mini YPbPr
| YPBPR Input terminate
Connect to equipment with component video output.
Optional Configuration as below:
Connect the USB to the USB jack on the set.
NOTE
- It is only 500 mA MAX of DC current output when you connect with USB jack
- To ensure the Mobile HD works well, you should use other power supply for the Mobile HD. And do not use the USB jack in the same time.
Remote control
Button
| Description
---|---
POWER
| Turn the TV on and off.
| Press this button to cut off the sound of the TV set temporarily, press
again to resume.
NUMBER BUTTONS
| Use to the choose channels (in TV mode).
-/–
| Press this button before entering a program number greater than 09.
| Return to last viewed program/signal source.
P.MODE
| Select the picture mode.
S.MODE
| Select the sound mode.
ASPECT
| Press to adjust picture ratio.
CH+/CH-
| Scroll to next/previous channel.
VOL+/VOL-
| Press to increase or decrease audio volume.
| Press this button to Home.(Android Mode)
| On/Off mouse mode.
AUDIO
| Display and selects audio systems.
| The button can be used to switch among the option that you want.
| Press this button to Browser.(Android Mode)
EPG
| Enter electronic program guide (only for DTV mode).
MENU
| Press to display or remove onscreen menus or to quit some operation.
SOURCE
| Press to change signal source.
ENTER
| Selects or runs a focused menu item.
| Directional pad (up / down / left / right). Moves the focus and changes the
values seen on the TV’s menu.
EXIT
| Press to exit the current interface.
INFO
| When pressed while you are watching a programme, detailed programme information appears.
COLOR BUTTONS
| Red / green / yellow / blue key. Use as a navigation link or program edit
menu.
| Digital media player control button:
Include play / pause, stop, backward, forward, next, previous (in USB mode).
REC
| To start Record Channel. Press to start recording channels stream to your
USB flash disk.
| Press to display the favourite programmes selected (in TV mode).
SUBTITLE
| Press the button to display available subtitles (in DTV mode).
LIST
| TV Mode: Press to call Channel List.
| TXT Mode: INDEX-Press to call Index main page.
| TXT Mode: Press to call teletext. Press button again to turn off teletext.
| TXT Mode: HOLD-press button tp freeze teletext page. Press button again to
unfreeze page.
| TXT Mode: Cancel the teletext but not to exit teletext press again to show
teletext.
| TXT Mode: Press button to turn on Subpage. Press again button to turn off
Subpage.
| TXT Mode: Press button to display hidden teletext information.
| TXT Mode: Size-Press to change teletext size.
Note:
- All picture in this manual are examples, only for reference actual product may differ from the picture.
- The button not mentioned here are not used
Menu Operation
SELECT INPUT SOURCE
Press SOURCE button to display the input source input list;
Press / button to select the input source you want to watch;
Press ENTER button to enter the input source;
After entering the source, for example DTV:
- Press MENU button to display the MAIN OSD MENU;
- Press / button to select the MENU you want;
- Press ENTER button to enter the sub menu, and press EXIT button to return back to the previous menu.
- Press / button to select the option and then press ENTER button or button to enter the submenu, press / button to adjust the value or press / button to select in the sub menu;
- You can press MENU button to save and return back to the previous menu, and press EXIT button to exit the entire menu.
Hotel mode
Press SOURCE button and 4588, then enter hotel mode.
Picture Menu
Press TV MENU button to display the main menu.
Press / button to select Picture in the main menu, and then press ENTER button
to enter.
- Press / button to select the option that you want to adjust in the Picture menu, and then press ENTER button or button to enter.
- Press / button to adjust or press / button to select. And press ENTER button to select the sub menu.
- After finishing your adjustment, press MENU button to save and return back to the previous menu, and press EXIT button to exit the entire menu.
Picture Mode
Press / button to select Picture Mode, then press ENTER button to enter and
press / button to select. (Available Picture Mode: User, Standard, Dynamic,
Mild)
You only can change the value of brightness, contrast, sharpness, color, when
the picture is in User mode.
Colour Temperature
Press / button to select Colour Temperature, then press ENTER button to
enter and / button to select Standard, Cool, Warm.
Aspect Ratio
Press / button to select Aspect Ratio then press ENTER button to enter and
press / button to adjust. Then press MENU button to return back the previous
menu directly.
Sound Menu
Press MENU button to display the main menu.
Press / button to select Sound in the main menu, and then press ENTER button
or button to enter.
- Press / button to select the option that you want to adjust in the Sound menu, then press ENTER button to enter.
- press / button to adjust or press / to select, and press ENTER button to select submenu.
- After finishing your adjustment, Press MENU button to save and return back to the previous menu, or press EXIT button to exit the entire menu.
Sound mode
Press / button to select Sound mode, and then press ENTER button to enter.
And then press / button to select. (Available Sound mode: User, Standard,
Music, cinema).
You can change the value of bass and treble, Balance and EQ, when the sound is
in User mode.
Balance
Press / button to select Balance, then press ENTER button to enter and
press / button to adjust.
Then press MENU button to return back the previous menu directly.
Surround
Press / button to select surround, then press ENTER button to enter and
press / button to adjust.
Then press MENU button to return back the previous menu directly.
Digital Audio output
Press / button to select SPDIF Output, then press ENTER button to enter and
press / button to select. (Available SPDIF mode: RAW, PCM, OFF)
Then press ENTER button or button to enter and press / button to adjust, then
press MENU button to return Each the previous menu directly.
Timer Menu
Press / button to select Timer, then press ENTER button to enter and press /
button to adjust.
Then press MENU button to return back the previous menu directly.
System lock
Press / button to select System Lock, then press ENTER button to enter and
press / button to adjust.
Then press MENU button to return back the previous menu directly.
Setting Menu
Press MENU button to display the main menu.
Press / button to select SETTING in the main menu, and then press ENTER button
to enter.
- Press / button to select the option that you want to adjust in the SETTING menu, and then press ENTER button to enter.
- Press / button to select and press ENTER button to select the and menu.
- After finishing your adjustment, press MENU button to save and return back to the previous menu, or press EXIT button to end the entire menu.
Channel Menu
Press MENU button to display the main menu.
Press / button to select setup in the main menu, then press ENTER to enter.
- Press / button to select the option that you want to adjust in the Channel menu, then press ENTER or le button to enter.
- Press / button to adjust or press / button to select.
- After finishing your adjustment, press MENU button to save and return back to the previous menu and press EXIT button to exit the entire menu.
Program Guide
In the DTV source, you cm start channel information function by pressing
Program Guide button on the remote control. The prompt window will appear as
follows:
Channel Edit
Press / button to select Channel Edit, and then press ENTER button to play
the channel selected. The menu will appear as follows:
Auto Tuning
Press / button to select Auto Search, and then press ENTER button to enter.
Select OK to search, The menu will appear as follows:
Manual Tuning
Press / button to select Manual Tuning, and then press ENTER button to
enter. Select Start Scan to search The menu will appear as follows:
Home Page
Press MENU button to display the math menu.
Press / button to select HOME and press ENTER button to select the sub menu.
Press / button to select Apps in the Source Menu, and then press ENTER or to enter.
Setting
Press / button to select Setting in the Some Menu, and then press ENTER or to enter.
Press / button to select the Network Setting that you can open the Wi-Fi. As the figure shows.
Press / button to select the Time Setting.
As the Ewe shows.
Press / button to select the Common.
As the Ewe shows.
Media Play
FileManager
Click the usb icon in the upper light comer of the home page to enter the file
manager page.
As shown below:
Photo
Press / button to select Photos in the main menu, and then press ENTER demo
to enter.
Press EXIT button to return back to the previous menu.
Music
Press / button to select Music in the main menu, and then press ENTER
button to enter.
Press EXIT button to return back to the previous menu.
Video
Press / button to select Video in the main menu, then press ENTER button to
enter.
Press EXIT button to return back to the previous menu.
Applications
Press / button to select Applications in the main menu, then press ENTER
button to enter.
Press EXIT button to return back to the previous menu.
Trouble Shooting
Before consulting service personnel, check the following chart for possible solutions.
PROBLEM
|
SOLUTION
---|---
TV will not turn on|
- Make sure the power cord is plugged in.
- The batteries in the remote control may be Exhausted; replace the batteries.
No picture, no sound|
- Check the cable between TV and antenna/ external AV device.
- Press the power button on the remote.
- Press the SOURCE button the remote, then press the “ / ” button repeatedly to select the TV source.
Poor picture, sound OK|
- Check the cable between TV and antenna/ external AV device.
- Try another channel, the station may have broadcast difficulties.
- Adjust the brightness/contrast in the Video menu. Check that the unit is set to PAL
Audio noise|
- Move any infrared equipment away from the TV.
The TFT LED panel uses a panel consisting of sub pixels which requires sophisticated technology to produce. However, there may be a small number of bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.
If at my time in the future you should need to dispose of this product please
note that: Waste electrical products should not be disposed pf with household
waste.
Please recycle where facilities exist. Check with your Local Authority or
retailer for recycling advice. (Waste Electrical and Electronic Equipment
Directive)