BougeRV ISE179 Portable Solar Panel User Manual
- June 14, 2024
- BougeRV
Table of Contents
BougeRV ISE179 Portable Solar Panel
Limited Warranty
BougeRV provides 18-month warranty service for the solar panel. Please read and follow the safety instructions in the manual carefully. The warranty service takes effect from the date of purchase. Please provide the order number of the purchased product and the serial number (bar code) attached to the front of the solar panel when applying for warranty.
- service@bougerv.com (US)
- l-408-656-8402
- l-669-232-7427
Safety Instructions
The Limited Warranties do not apply to any of the following: The solar panel which in BougeRV’s absolute judgment have been subjected to misuse, abuse, neglect or accident, alteration, or improper installation, application, or removal. This includes, but is not limited to, installation, application, or removal by any party other than a BougeRV authorized dealer; non-observance of BougeRV’s installation, safety instructions; power failure surges, lightning, flood, fire, accidental breakage, or other events beyond BougeRV’s control.
Electrical Parameters
| 100W| 200W
---|---|---
Maximum Power (Pmax)| 100W| 200W
Solar cells Effificiency| 23.00%| 23.00%
Max. Power Voltage (Vmp)| 19.SV| 19.SV
Open Circuit Voltage (Voe)| 23.7V| 23.7V
Max. Power Current {Imp)| 5.05A| 10.lA
Short Circuit Current (lsc)| 5.33A| 10.6A
Max. System Voltage| 1000V DC| 1000V DC
Operating Temperature Limits| -4o-ss·c (-40-1 ss ° F)| -4o-
ss·c (-40-1 ss ° F)
Dimensions (unfolded)| 1082x655x35mm 42.6×25.8xl.4 inches|
2200x647x35mm 86.6×25.5xl.4 inches
Dimensions (folded)| 538x655x63mm 21.2×25.8×2.5 inches|
555x647x70mm 21.9×25.5×2.75 inches
Product Weight| 4.59KG / 10.1lbs| 8.23KG / 18.1lbs
BougeRV provides you with professional technical services. You can send us your needs and the parameter information or instructions of your purchased accessories directly to our email: service@bougerv.com , we will help you build the ideal DIV solar system.
How To Use
Solar Power Station System
Connect the MC4 connectors A of the solar panel with the MC4 to DC7909 cable
B. 
Compatible with various types power stations
As long as your other cable is equipped with MC4 connectors, then it could
connect with our connector A of the solar panel. 
Solar Off-grid System
- First connect battery terminal wires to the charge controller.
- Then connect the solar panel to the charge controller.
Series Connection
The panel can be wired in series to produce the desired voltage output
.
Parallel Connection
The solar panel can be wired in parallel to produce the desired current output
with the solar parallel connector. 
Frequently Asked Questions
-
Q 1: What causes the low output power or no output during the use of solar panels? How can I solve it?
-
Light intensity: Latitude, altitude, and sun altitude angle will affect the light intensity; multiple measurement results show that high temperature does not equal strong light intensity.
-
Solar installation angle: In the same geographical location, due to
the different installation inclination angles, the cumulative amount of sunlight absorbed and the cumulative difference in radiation amount causes the difference in power generation. It works best when the solar panel is roughly perpendicular to the light. -
Solar panel surface temperature: When the solar panel surface temperature is 77° F, the output power is ideal. When the temperature is higher than 77 degrees Fahrenheit, the output power will decrease.
-
Shadow occlusion: During the working process of the solar panel, due to the partial occlusion of the shadow and the different degrees of dust settlement, the pollution of bird droppings will cause the “hot spot effect”, and the shaded part of the solar panel will not provide power contribution and will not be used in the solar panel. The interior becomes an energy-consuming load, and at the same time causes the local temperature of the solar panel to increase. The overheated area can cause the EVA to accelerate aging and turn yellow, which reduces the light transmittance of the area, further deteriorates the hot spot, and leads to aggravated failure of the solar panel. Therefore, when using it, you should avoid blocking things and clean the surface of the solar panel regularly.
-
Load factors: When charging the energy storage, it will be limited by the maximum PV input current and voltage of the energy storage. Therefore, the input power value displayed on the energy storage display does not represent the maximum output of the solar panel. Please confirm the PV input related parameters of the energy storage before use;
Due to the own characteristics of PWM, there is a certain switching loss in the process of connecting with the solar panel, so the input power obtained by the battery will be lower than the maximum output of the solar panel. -
Q2: Why the solar panel can’t provide 100% of the output energy?
-
Limited by light intensity. Please refer to Ql for more details.
-
Limited by the solar charge controller. The output conversion efficiency of the PWM controller is 75%, and the output conversion efficiency of the MPPT controller is above 90%.
-
Limited by the power station. The PV input voltage and PV input current of the power station will limit the output of the solar panel. It’d be better to confirm the input parameters of the power station before building a solar panel system.
-
Q3: What should I do if the solar panel I received is damaged, missing parts, or has no output?
Please send relevant pictures to our after-sales mailbox service@bougerv.com immediately, and leave your order number. We will reply one by one according to the chronological order sent by the customers. -
Q4: What kind of device can be charged by this solar panel?
-
Solar Power Station
-
Lead-acid Battery (need the solar charge controller)
-
Lithium Battery (need the solar charge controller)
BougeRV sells different kinds of MPPT/PWM controllers, lithium iron phosphate battery and power stations to build your solar system.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>