Shenzhen Yuanxingwei Technology Y1W200M Audio Video Wireless Extender User Manual
- June 3, 2024
- Shenzhen Yuanxingwei Technology
Table of Contents
Yuanxingwei Technology
Y1W200M Audio Video Wireless Extender
User Manual
Introduction
This wireless HDMI extender transmits HDMI signals wirelessly, and HDMI signal transmission distance is up to 200 meters in an open environment. The signal passes through the wall without pressure. 2.4G wireless high-speed transmission signal is adopted, with strong anti-interference ability. The signal is stable without delay. The external dual antennas enhance the signal strength, making the video transmission more smooth. This wireless HDMI extender greatly reduces the cost and trouble of installation. This item can be widely used in office demonstration, speech, education, conference hall, family entertainment, etc.
Features
- Wireless transmission can reach up to 200m in an open environment.
- Support 2.4G
- Transmission bandwidth 4MBps-7MBps.
- HDMI input resolution support up to 1920x1080P60Hz.
- The transmitter supports local HDMI signal loop out, signal lossless,no delay.
- H.265 encoding and decoding technology is adopted to effectively improve transmission efficiency and ensure smooth playback.
- Free driver,plug and play.
Specifications
| Product name | Wireless HDMI Extender 200M |
|---|---|
| Power input | DC 5V/1A |
| HDMI input resolution | Up to 1920x1080P60Hz TV:1920×1080 60, 1920×1080 50, |
1920×1080 30,1280×720 60, 1280×720 50,720×480
PC: 1920×1080,1600×1050, 1600×900, 1440×900 1400×1050,1360×768,
1280×720,1024×768
HDMI output resolution| Fixed 1920x1080P60 without HDCP (HDCP version can be
customized)
Audio format| DTS-Audio/DTS-HD/ PCM/LPCM
HDMI input& output cable length| ≤ 8m AWG26 HDMI Standard cable
Wireless transmission distance| 200M (open and spacious)
Support wireless channel| 40,44,48,149,153,157,161, 165
Transmission delay| ≤ 200ms
Working temperature| 0°C-70t
Compressed format| H.265
Power consumption| TX: 1.5W
RX: 1.5W
Dimension (mm)| 115.56119
Interface indication Diagram
- WIFI indicator
- Reset
- HDMI loop output
- HDMI input
- Power input
- WIFI indicator
- Reset
- HDMI output
- Power input
Connection Diagram
Package Content
- 1 x HDMI Wirelesss Transmitter
- 1 x HDMI Wirelesss Receiver
- 2 x Power Supply
- 1 x User Manual
Attention
- When RX does not detect TX connection, the display will prompt”Searching TX”;
- When the connection between TX and RX does not detect HDMI input from TX, the system will prompt “Check TX’ s input signal”;
- When the resolution is not supported, the system will prompt “Not supported, change source resolution!”.
- It does not support infrared, KVM, one to many, many to one, automatic frequency conversion, mobile phone vertical screen, audio separation(If you need these functions, customization avaliable).
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to pat 15 of the FCC Rules. These limits are
designed to provide masonable protection aping harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio commications. However,
there is no guarantee that interference will not occur in a particular
installation If this equipment does cause harmful interference to radio or
television reception, which can be determined by timing the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reonent or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: ( I ) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF Exposure Information The device has been evaluated to meet general RF exposure requirement. the antenna of the product is at lean 20an away from the body of the user . The device can be used in portable exposure condition without restriction.