HEdbox RP-DC50 Dual LCD Simulations Battery Charger User Manual

HEdbox RP-DC50 Dual LCD Simulations Battery Charger User Manual

Product Features

• Charge a Li-Ion DV Battery Pack that runs on 3.6V, 7.4V or 14.8V
• LCD Display provides a clear, accurate, and precise display of power status, charging status, battery channel status, and boost power mode. With a bright and intense blue color backlight, the readout function is enabled in the dark.
• Worldwide use with an input between 100 ~ 240V AC;
• With advanced MCU Micro-Computer Chip control, the charger fully controls the charging process of the DV Li-Ion Battery pack.
• Passed MBTR 5000H test and own its patent with more reliable quality warranty;
• Safety protection:
  • Over temperature protection reaches 85C,
  • Over-voltage protection gets at 19.5V,
  • Over-current protection gets at 6.5A,
• The charger RP-DC50 has short circuit protection and charging time protection.
• Dual charging port. Provide simultaneous charging of two batteries with different, voltage and capacity or manufacturing brands.
• Specially designed for use on all Hedbox Battery Packs.
• Dual charging technology, the CC and CV, provide high battery charging efficiency.
• Pre-charging function 0V activation efficiently extends battery life.
• Advanced microcomputer control detects switch voltage and capacity display on the LCD.
• Don’t try to disassemble or open the cover under any circumstance in order to avoid danger.
• The charger will be damaged if not used properly.
• Children should use it under the supervision of adults.
• Take out the rechargeable battery from the charger slot when the battery is entirely charged or if the charger process is stopped.
• It’s a common phenomenon for the unit to feel warm when using.
• This device is for indoor use only, don’t put or use it in high temperature and high moisture environment.
• Avoid dropping and bumping otherwise the electrical components will be damaged

Overview

1. Product Components:
2. Boost Power switch (Boost code)
3. LCD Screen Monitor (Blue Backlight)
4.  Charging Slot #1
5. Charging Slot #2
6. AC Power (100V ~ 240V – 50 / 60Hz)
7. DC 12V / 24V Power Input Socket
8. USB-A Power Out 5V ~ 2A /10W

Charging Technology

IIntelligent charging systems integrate the control systems within the charger and the electronics within the battery to allow precise control over the charging process. As a safety precaution with high-capacity batteries, a pre- charging stage is used. The charging cycle is initiated with a low current. If there is no corresponding rise in the battery voltage, it indicates that there is possibly a short circuit in the battery (zero volt activation). Constant current constant voltage (CC/CV) charging mode effectively charges lithium batteries. When a lithium battery is nearly empty, we take constant current to charge it. The charger CPU automatically adjusts the charging current to be lower than the maximum charging current that the battery can accept. With constant current charging, the battery’s voltage rises slowly until it reaches a maximum voltage at this point, the charger switches the charging method to “constant voltage” and reduces the charging current. When the battery is fully charged, this state is stopped.

Operation

1. Plug the supplied bower bord into the Main AC power outlet.
2. Plug the other side of the supplied bower bord to the charger AC Power (picture B).
3. Charger RP-DC50 turns ON automatically.
4. The LCD bcreen will illuminate blue, and the HEDBOX bogo will turn on (picture D).
5. Use the exchangeable battery bharger plate (purchase it separately) and gently put /slide in one of the charging sockets.
6. Use the appropriate battery that you want to charge and put it on the battery charger plate.
7. The charging process starts with a full display of the charging process and battery capacity.

After installing the battery pack onto the charging socket, the RP-DC50 measures the internal battery cell resistance and starts pre-charging.

• Please check that the DV Battery pack is compatible with RP-DC50 power voltage and current.
• Be sure that the battery charger plate firmly locks the battery in place.
• Observe the Charger LCD Monitor.
• If the battery is attached appropriately, it will illuminate the battery channel and current capacity.
• Please use the manual instructions of the battery pack that you want to charge.
• Read that manual carefully before using the battery with this RP-DC50 Battery Charger.
• We are not responsible for any damage caused by incorrect use or operation.

BOOST Button

• Dual Digital LCD Battery Charger RP-DC50 has two charging modes: NORMAL and BOOST.
• When you turn ON the charger, the default charging mode is NORMAL.
• If you want to charge two (2) batteries simultaneously in a normal mod, the charger will provide a charging power of 500mA per one charger slot.
• If you want to speed up the charging process and time, you can activate the BOOST mode. Pressing the RED button on the top of the charger (On LCD, the boost ICON is displayed) will provide 800mA per one battery slot.
• Charging two (2) batteries simultaneously in a fast charging mode (Boost) charger will give a current of 800mA per channel.

LCD Information

current charging mode is active and provides fast boost charging of the batteries. Fast charging mode: 1 battery / 1.5 A ; 2 batteries / 0.8 A
| 8.4 V Charging icon:| When it appears, 8.4 V charging mode for DV batteries is in progress
| 18.4 V Charging icon:| When it appears, 16.8 V charging mode for Pro DV batteries is in progress
| Battery charging progress icon| When battery is on the charger and charging process starts, the battery charging icon will be displayed.Progress icon will be displayed one by one.

Full| Battery full| It shows that the battery is fully charged and ready.
---|---|---
| Battery capacity percent rate| It shows the battery capacity charging percent rate
| USB power| Displays 5V USB power out
| DC 12V IN icon| Displays that the 12 V DC IN is present (car cable in)
| Battery channel| Shows presence of the battery on the charger/channel

USB

You can use your Dual Digital Battery Charger RP-DC50 to power USB devices while charging your DV Battery. Plug the USB-A cable of your device to the USB-A port of the RP-DC50 charger. The USB sign on the LCD will pop up. USB is active in both charging modes, the boost and regular.

Exchangeable battery charger plate

• The RP-DC50 digital dual charger can be used for all World brand battery models with easily interchangeable battery plates. This economical option allows you to charge many different batteries, all with one charger and a compatible model of battery charger plate.
• The charger automatically sets the charging voltage and current for the designed battery pack. That leaves no space for charging errors!
• The corresponding battery charger plate that fits the battery you want to charge can be found in the link: https://www.hedbox.com/finder/

NOTE :
The exchangeable battery charger plates need to be purchased separately.

In Car Use

• With a 12V – 24V DC power source (a DC 12V Car charger cable suplied) you can use the charger and charge your batteries in the Car, Airplane, Bus, or any other place where 12V-24V DC power is supplied.
  NOTE:

• When using Battery Charger Plate RP-DBPU or (charging HED-BP75D or HED-BP95D) or RP-BPA60 (charging HED-A60) or any other 14.4V battery you need to power RP-DC50 with 24V DC Power Supply.

Specification

Design and specifications are subject to change without notice.

Note:
Always ensure that the unit is operating properly before use. HEDBOX WILL NOT BE LIABLE FOR DAMAGES OF ANY KIND INCLUDING, BUT NOT LIMITED TO, COMPENSATION OR REIMBURSEMENT ON ACCOUNT OF THE LOSS OF PRESENT OR PROSPECTIVE PROFITS DUE TO FAILURE OF THIS UNIT, EITHER DURING THE WARRANTY PERIOD OR AFTER EXPIRATION OF THE WARRANTY, OR FOR ANY OTHER REASON WHATSOEVE

References

• HEDBOX | FINDER | Hedbox Products Finder & Battery Plate Finder

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>