tehnoteka BL079 Triple Pack Light Wings ARGB LED Cooling Fan User Manual

: June 1, 2024
: tehnoteka

Table of Contents

BL079 Triple Pack Light Wings ARGB LED Cooling Fan
SCOPE OF DELIVERY
Limited Warranty
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Be Quiet Triple-Pack
Light Wings ARGB
LED PWM BL079
ventilator za PC
be quiti®
https://tehnoteka.rs

tehnoteka BL079 Triple Pack Light Wings ARGB LED Cooling
Fan

BL079 Triple Pack Light Wings ARGB LED Cooling Fan

Introduction: Thank you for deciding to purchase a be quiet! product. The following instructions will guide you through the installation process. If you do encounter installation problems, please don’t hesitate to contact our customer services by mailing service@bequiet.com. Please note that be quiet! cannot accept liability for damage caused by compatibility problems.
Warranty:

3-year manufacturer guarantee for consumers (original purchase from authorized be quiet! dealers only)
Guarantee work can only be processed with a copy included of the purchase receipt from an authorized be quiet! dealer
Manipulation and structural changes of any kind, including any damage caused by external mechanical force, will lead to a complete voiding of the guarantee
Our General Warranty Conditions apply, which can be viewed on bequiet.com

Listan GmbH.Wilhelm-Bergner-Straße 11c. 21509 Glinde Germany. For further information please visit our website: www.bequiet.com

SCOPE OF DELIVERY

| Part name| Quantity
---|---|---
| ca) be quiet! Light Wings| 1 / 3
| ap ARGB Hub Ca ARGB-Hub| o/1
| CD Double coated tissue tape CB naliklebattd,| 0/1
| CD Fan screws
CD Lafterschrauben| 4/2
| CO Fastening screws for ARGB Hub ts Befestigungsschrauben fur ARGBHub| 0/4
| CD ARGB cable 0 ARGB-Kabel| 0/1

Installation of Light Wings Single Pack | Installation des Light Wings Single Pack

Screw down the fan using the fan screws.
Combine the ARGB connector of the fan with the 5V ARGB connector of the motherboard. To do that switch off your system prior to installation.

Installation of Light Wings Triple Pack | Installation des Light Wings Triple Pack

Screw down the fans using the fan screws.
The ARGB Hub allows you to synchronize up to six 5V ARGB devices directly through your motherboard. To do that switch off your system prior to installation.
Next combine the connector of the fan with one of six LED headers.
Use the ARGB cable to connect the RGB IN connector of the ARGB Hub with the 5V ARGB connector of the motherboard.
Connect the SATA cable of the ARGB Hub with a SATA header of your power supply.
Next attach the ARGB Hub with the screws or double coated tissue tape on the case.

UK Authorised Representative (for authorities only)
ProductIP (UK) Ltd.
8, Northumberland Av. London WC2N 5BY

Limited Warranty

Per the terms and conditions of this limited warranty as given below, be quiet! warrants its new products to be free of defects resulting from faulty materials and faulty manufacturing for the length of the warranty period.

I. APPLICABILITY
This non-transferable warranty is applicable to newly purchased, previously unopened be quiet! products and is enforceable by only the original consumer purchaser.
Proof of purchase is required for warranty service, so should be retained. be quiet! does not provide warranty registration services.
II. WARRANTY PERIOD
For eligible products, parts and labor are warranted for the applicable warranty period from the date of purchase.
The applicable warranty period varies by product model, and is identified in your user documentation, on the product package, or as listed below.
Should any of these warranty periods differ, the longest specified warranty period will apply.
Replaced products will be warranted for the remainder of the original warranty period or thirty days, whichever is longer.
III. EXCLUSIONS
The following are not covered by the warranty: