tehnoteka Citation 700 Soundbar Speaker Instruction Manual

: June 13, 2024
: tehnoteka

Table of Contents

APP
PRODUCT TOUR
CONTROL / INFORMATION ON TOUCH SCREEN
CONNECT TO YOUR TV
ALL MOUNT THE CITATION MULTIBEAM 700
GET STARTED
SET UP MULTIBEAM™ SURROUND SOUND
CHROMECAST BUILT-IN™
Air Play
GOOGLE ASSISTANT
SPECIFICATIONS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

tehnoteka Citation 700 Soundbar Speaker Instruction Manual

https://tehnoteka.rs/p/harmankardon-soundbar-zvucnik-citation-700-crni- akcija-cena/

APP

The Google Assistant setup

Google Home

Download the Google Home app and set up your Citation Multibeam 700.

All product features will be set up.

AirPlay setup

AirPlay Setup

For AirPlay only users, skip the Google Home app; on your iOS device, go to Settings > Wi-Fi and select “Citation MultiBeam 700” under SET UP NEW AIRPLAY SPEAKER … Follow the onscreen instructions to complete setup.

Google Assistant and Chromecast built-in™ will require additional set up with the Google Home app

PRODUCT TOUR

Citation Multi Beam 700 x1
Regional power cord x1 (varies depending on country
Remote control x1
HDMI cable x1
Optical cable x1
Wall mounting kit

Top & Front

Back

CONTROL / INFORMATION ON TOUCH SCREEN

Touch screen

Wi-Fi status
Bluetooth status
Mic mute/unmute
HDMI ARC source
Push to talk to Google Assistant
Set up other Citation speakers

CONNECT TO YOUR TV

Connect You TV

ALL MOUNT THE CITATION MULTIBEAM 700

Use tape to stick the wall-mounted paper guide on the wall, push a pen tip through the center of each mounting hole to mark the wall-mounted bracket location and remove the paper.
Use Tape Stick

Screw the wall mount brackets on the pen mark; screw the threaded mounting post into the back of the Citation MultiBeam 700, then hook the Citation MultiBeam 700 on the wall.
Screw Installations

GET STARTED

(Android/iOS)

Google Home Icon

Citation MultiBeam

Add Citation MultiBeam 700 to your home Wi-Fi network:
Download and run the Google Home app on a phone or tablet.
Follow the instructions on the touch screen and Google Home app to finish the setup.

Enable Bluetooth (iPhone / iPad).

SET UP MULTIBEAM™ SURROUND SOUND

Automatic MultiBeam Calibration (AMC) will optimize the soundbar sound settings for a better surround sound experience.

CHROMECAST BUILT-IN™

Step 1: Open Chromecast supported app.
Step 2: Play Music.
Step 3: Tap the cast icon and select “Citation MultiBeam 700”.

e.g.
Spotify
Pandora
TuneIn
Deezer
Google Play Music
Device can support multi-room control provided by Chromecast built-in, more details you can refer to Google Home app.

Air Play

Step 1: On an iOS device, enter the Control Center.
Step 2: Tap to select “Citation MultiBeam 700” as speaker.
Step 3: Start audio streaming from an app.
Air Play

GOOGLE ASSISTANT

Microphone muted:
Mute the microphone to stop Google Assistant from listening.

Push to talk to Google Assistan

OWNER’S MANUAL

Download the full owner’s manual from harmankardon.com

SPECIFICATIONS

Model Name: CITATION MULTIBEAM 700
Power supply: 100 – 240 V ~ 50 / 60Hz
Output power: 210 W RMS
Bluetooth version: 5.1
Bluetooth transmitter frequency range: 2402 – 2480 MHz
Bluetooth transmitter power: <10 dBm (EIRP)
Bluetooth transmitter modulation: GFSK, π/4 DQPSK, 8DPSK
Wireless network: 802.11a/b/g/n/ac (2.4GHz/5GHz)
2.4G Wi-Fi transmitter frequency range: 2412 – 2472 MHz (2.4GHz ISM Band, USA 11 Channels, Europe and others 13 Channels)
2.4G Wi-Fi transmitter power: <20 dBm (EIRP)
2.4G Wi-Fi modulation: DBPSK, DQPSK, CCK, QPSK, BPSK,16QAM, 64QAM
5G WISA transmitter power: < 18 dBm (EIRP)
5G WISA modulation: OFDM, BPSK, QPSK, 16QAM
5G WISA transmitter frequency range: 5.15 – 5.35 GHz, 5.470 – 5.725GHz, 5.725 – 5.825 GHz
5G Wi-Fi transmitter power: < 23 dBm (EIRP)
5G Wi-Fi modulation: QPSK, BPSK, 16QAM, 64QAM, 256QAM
5G Wi-Fi transmitter frequency range: 5.15 – 5.35GHz, 5.470 – 5.725GHz, 5.725 – 5.825GHz

Note: CITATION MULTIBEAM 700 is in compliance with European

Commission Regulation (EC) No 1275/2008 and (EU) No 801/2013.

Power consumption

Off Mode: N/A
Standby: N/A
*Network Standby:** 2.0 Watts Time to networked standby: 18 minutes
- Networked standby: in the condition of any wireless connection of the device is activated, if no provide any audio or video signal to the device, it will automatically into networked standby mode in 18 minutes. Any audio or video recover will bring device from standby to operation mode.

This device complies with Part 15 of the FCC rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAN ICES-3 (B)

NMB-3 (B). IC Caution:

User should also be advised that:

the device for operation in the band 5150 – 5250 MHz is only for indoor use to reduce the potential for harmful interference to cochannel mobile satellite systems;
the maximum antenna gain permitted for devices in the bands 5250 – 5350 MHz and 5470 – 5725 MHz shall comply with the e.i.r.p. limit: and
the maximum antenna gain permitted for devices in the band 5725 – 5825 MHz shall comply with the e.i.r.p. limits specified for point-topoint and non point-to-point operation as appropriate.
Users should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250 – 5350 MHz and 5650 – 5850 MHz and that these radars could cause interference and/ or damage to LE-LAN devices.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interference with and/or damage this device. No configuration controls are provided for this wireless equipment allowing any change in the frequency of operations outside the FCC grant of authorization for US operation according to Part 15.407 of the FCC rules.

FCC/IC Radiation Exposure Statement: This equipment complies with

Use Restriction: This device is restricted to indoor use when operating
in the 5150 to 5350 MHz frequency range in following countries:

Belgium (BE), Greece (EL), Lithuania (LT), Portugal (PT), Bulgaria (BG), Spain (ES), Luxembourg (LU), Romania (RO), Czech Republic (CZ), France (FR), Hungary (HU), Slovenia (SI), Denmark (DK), Croatia (HR), Malta (MT), Slovakia (SK), Germany (DE), Italy (IT), Netherlands (NL), Finland (FI), Estonia (EE), Cyprus (CY), Austria (AT), Sweden (SE), Ireland (IE), Latvia (LV), Poland (PL) and Northern Ireland (UK).

| BE| EL| LT| PT
---|---|---|---|---
BG| ES| LU| RO
CZ| FR| HU| SI
DK| HR| MT| SK
DE| IT| NL| FI
EE| CY| AT| SE
IE| LV| PL| UK(NI)

Note Icon UK

This product contains open source software. For your convenience, the source code and relevant build instruction for software licensed under the GPL is available at.

You may also obtain this information by contacting us at
OpenSourceSupport@Harman.com

tehnoteka Logo