V-TAC VT-4455 LED Flood Light Instruction Manual
- June 13, 2024
- V TAC
Table of Contents
V-TAC VT-4455 LED Flood Light
Product Information
The product is an LED Flood Light with the following specifications:
- Model: VT-4455
- SKU: 8844 8845
- Weight (N.W): KGS
- Maximum Mounting Height: Not specified
- Projected Area: MMP
Product Usage Instructions
Before using the LED Flood Light, please take note of the following instructions:
- To reduce the risk of strangulation, ensure that the flexible wiring connected to the luminaire is effectively fixed to the wall if it is within arm’s reach.
- Scan the QR code provided to access the instruction manual in multiple languages.
Note: For detailed information on mounting height and projected area, please refer to the instruction manual.
TECHNICAL DATA
*This product contains a light source of energy efficiency class
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installing and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best. The warranty is valid for 5 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.
WARNING
-
Please make sure to turn off the power before starting the installation.
-
Installation must be performed by a qualified electrician.
-
The light source of this luminaire is not replaceable, when the light source reaches its end of life the whole luminaire
should be replaced. -
If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer
or his service agent or a similar qualified person in order to avoid a hazard. -
Replace any cracked protective shield.
-
Terminal block not included.
-
Proper grounding should be ensured throughout the installation.
-
Minimum distance from lighted objects
NOTE: To reduce the risk of strangulation the flexible wiring connected to this luminaire shall be effectively fixed to the wall if the wiring is within arm’s reach. -
This marking indicates that this product should not be disposed of with other household wastes.
-
Caution, risk of electric shock.
MULTI-LANGUAGE MANUAL QR CODE
Please scan the QR code to access the manual in multiple languages.
INSTALLATION DIAGRAM
INSTALLATION INSTRUCTION
- DO NOT USE IN AREAS WITH LIMITED VENTILATION OR OUTSIDE THE RATED AMBIENT TEMPERATURE RANGE. CON- NECT WITH WATERPROOF CABLE HOUSE ONLY. ENSURE ELECTRICITY IS SWITCH OFF BEFORE INSTALLATION.
- Please do not mount to a surface that is prone to vibrations.
- Remove the screw and the bracket afterward. (Figure 1)Before drilling, mark the hole position for fixing the bracket onto the wall (Screw not supplied). (Figure 2)
- Screw the retaining bracket to the wall with a suitable quantity of screws. (Figure 4)
- Mount the bracket back to the fixture. Adjust the floodlight according to the desired position. Tighten the screw. (Figure 5) Connect your main cable (HO5RN-F3G1.0mm2 Recommended) with the input lead of our product through the waterproof junction box. Note, the line (-) of the lead. (Need to use the junction box of IP65 or above, ensure to tighten the waterproof screw) Switch on the power to make sure if the product is working.
DISASSEMBLY DIAGRAM
IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: SUPPORT@V-TAC.EU FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST DEALERS. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B