HYPERX 4402173D Cloud Stinger Core Wireless Gaming Headset User Guide
- June 13, 2024
- HYPERX
Table of Contents
- HYPERX 4402173D Cloud Stinger Core Wireless Gaming Headset
- Product Overview
- Product Usage Instructions
- Overview
- Charging
- Using the Headset
- Status LED
- Volume Wheel
- Swivel to Mute Microphone
- Questions or Setup Issues
- Simplified Declaration of Conformity
- FCC Compliance and Advisory Statement
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
HYPERX 4402173D Cloud Stinger Core Wireless Gaming Headset
Product Overview
The HyperX Cloud Stinger Core is a wireless gaming headset designed for PlayStation gaming consoles. It features a swivel-to-mute microphone, volume wheel, and various LED indicators for status updates. The headset comes with a USB adapter for wireless connectivity and charging.
Product Features:
| Component | Description |
|---|---|
| A | Swivel-to-mute microphone |
| B | Status LED |
| C | Power button |
| D | Volume wheel |
| E | USB charge port |
| F | USB adapter |
| G | Wireless pairing pin hole |
| H | Wireless status LED |
| I | USB charge cable |
Product Usage Instructions
- Connect the wireless USB adapter to your PlayStation gaming console.
- Power on the headset by pressing and holding the power button for 3 seconds.
- Wait for the wireless adapter status LED to become solid, indicating a successful connection.
PlayStation 4 Audio Settings:
Go to Settings > Devices > Audio Devices on your PlayStation console and
configure the following settings:
- Input Device: USB Headset HyperX Cloud Stinger Core Wireless PS
- Output Device: USB Headset HyperX Cloud Stinger Core Wireless PS
- Output to headphones: All Audio
Charging:
It is recommended to fully charge your headset before first use. Use the USB
charge cable provided to connect the headset to a power source. The LED
indicators will show the charging status:
| LED Status | Battery Level |
|---|---|
| Solid green | Fully charged |
| Breathing green | 15% – 99% battery |
| Breathing red | < 15% battery |
Volume Control:
Scroll up or down on the volume wheel to adjust the volume level. Please note
that using the headset at high volumes for extended periods of time may cause
permanent hearing damage.
Swivel-to-Mute Microphone:
The microphone can be rotated to mute audio. Simply swivel the microphone
upwards to automatically mute the audio.
Support:
If you have any questions or encounter setup issues, please contact the HyperX
support team at
hyperxgaming.com/support/headsets.
Overview
- A Swivel to mute microphone
- B Status LED
- C Power button
- D Volume wheel
- E USB charge port
- F USB adapter
- G Wireless pairing pin hole
- H Wireless status LED
- I USB charge cable
Charging
It is recommended to fully charge your headset before first use.
| CHARGE STATUS | LED |
|---|---|
| Fully charged | Solid green |
| 15% — 99% battery | Breathing green |
| < 15% battery | Breathing red |
Power Button
Power on/off – Hold power button for 3 seconds
Using the Headset
- Connect the wireless USB adapter to PlayStation.
- Power on the headset.
- When the wireless adapter status LED is solid the headset is connected.
PlayStation 4 Audio Settings
Settings > Devices > Audio Devices
- Input Device: USB Headset “HyperX Cloud Stinger Core Wireless PS”
- Output Device: USB Headset “HyperX Cloud Stinger Core Wireless PS”
- Output to headphones: All Audio
Status LED
| HEADSET STATUS | LED |
|---|---|
| Pairing | Flashing green and red every 0.2s |
| Searching | Slow breathing green |
Connected
| 90% — 100% battery: Solid green
15% — 90% battery: Blinking green
< 15% battery: Blinking red
Volume Wheel
Scroll up or down to adjust volume level.
WARNING:
Permanent hearing damage can occur if a headset is used at high volumes for
extended periods of time.
Swivel to Mute Microphone
Questions or Setup Issues
Contact the HyperX support team at hyperxgaming.com/support/headsets.
Simplified Declaration of Conformity
Hereby, HP declares that the radio equipment is in compliance with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following internet address: www.hp.eu/certificates (search with Model Name).
UK only:
Hereby, HP declares that the radio equipment is in compliance with the
relevant statutory requirements. The full text of the declaration of
conformity is available at the following internet address:
www.hp.eu/certificates (search with Model
Name).
Battery/TX Power Info
Battery Information
- Contains 3.7V, 1000mAh Li-ion Battery, 3.7Wh
- Cannot be replaced by user
Frequency & TX Power Information
- Frequency Bands: 2.4GHz (TX Power: <2dBm)
FCC Compliance and Advisory Statement
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, according to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the useris encouraged to try correct the interference by one or more of the following measures:
- Reorient the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into and outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Any special accessories needed for compliance must be specified in the instruction manual.
Warning:
A shielded-type power cord is required in order to meet FCC emission limits
and also to prevent interference to the nearby radio and television reception.
It is essential that only the supplied power cord be used.
Use only shielded cables to connect I/O devices to this equipment.
CAUTION:
Any changes or modifications not expressly approved by the party responsible
for compliance could void your authority to operate the equipment. FCC ID:
B94-CS002
Canada Notices
This Class B digital apparatus complies with Canadian ICES-003.
ISED Statement
This device contains licence-exempt transmitter(s) that comply with
Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
- this device may not cause interference,
- this device must accept any interference, including interference that may cause undesired operation of the device.
India RoHS Statement
This product, as well as its related consumables and spares, complies with the
reduction in hazardous substances provisions of the “India E-waste (Management
and Handling) Rule 2016.” It does not contain lead, mercury, hexavalent
chromium, polybrominated biphenyls or polybrominated diphenyl ethers in
concentrations exceeding 0.1 weight % and 0.01 weight % for cadmium, except
for where allowed pursuant to the exemptions set in Schedule 2 of the Rule.
©Copyright 2022 HyperX and the HyperX logo are registered trademarks or trademarks of HP Inc. in the U.S. and/or other countries. All registered trademarks and trademarks are property of their respective owners.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>