DiamondTiger HY-V1082-B0-SO-HO 4K HDMI Splitter User Manual

DiamondTiger HY-V1082-B0-SO-HO 4K HDMI Splitter User Manual

Purchasing

Thank you for purchasing our HDMI 1×8 Splitter. For optimum performance and safety, please read the instructions carefully before attempting to install or operate. Please keep this manual for future reference.

Package Contents

• HDMI Splitter 1 inputs 8 output x1
• Power Adapter
• User Manual x1 x1

Features

• Compliant with HDMI 2.0, and HDCP 2.2 standards.
• Backward compliant with HDMI1.4,HDCP1.Х.
• Support RGB and YCbCr 4:4:4/4:2:2/4:2:0 format.
• Bypass, CSC-processed, down-scaled content can be selected on each of the 8 output ports individually.
• Serial data rate at up to 6.0Gbps, capable of supporting HDMI 2D video up to 4Kx2K@60Hz and 3D up to 4Kx2K@30Hz. Support Deep Color Mode at up to 36 bits (12 bits/color). Support HDMI 2.0 and HDMI 1.4 3D format with frame packing/Top and Bottom/side by side mode. • Integrated pre-programmed HDCP keys.
• Pure hardware HDCP 2.2 and 1.x engine increasing the robustness and security of HDCP operation.
• Embedded EDID RAM saves external EDID ROM costs.
• Active source and sink detection for auto low power state implementation.
• Disconnect able input terminations with auto-calibrated impedances.
• Adaptive input equalization supporting long and short cables at the same time.
• Programmable TMDS output current level.
• Programmable source terminations. Compliant with HDMI 2.0 standard, providing optimal source data eyes at high speeds.

Specifications

HDMI resolution..24/50/60fps/480i/480p/576i/576p/720p/1080i/1080p/2160pSupports video color format| 24bit/deep color 30bit, 36bit, 48bit
Supports audio format| .DTS-HD/Dolby-trueHD/LPCM7.1/ DTS/Dolby-AC3/DSD HD(HBR)
Max bandwidth| .600MHz
Max baud rate| 18.0Gbps
1080P Input cable distance| 15m AWG24 HDMI standard cable
1080P Output cable distance| 20m AWG24 HDMI standard cable
4Kx2K Input cable distance| <5m AWG24 HDMI standard cable
4Kx2K Output cable distance| 8m AWG24 HDMI standard cable
Max working current| 1.5A
Power adapter format Input| AC100V-240V (50/60Hz); Output: DC 5V/2A
Operating Temperature range.| ..(-20°C to +70°C)
Operating Humidity range| 5 to 90%RH (No Condensation)
Dimension (LxWxH)| 277x136x26.5(mm)
Weight| 745g

Product Diagram

1. HDMI Output 1-8 LED
2. HDMI Input LED/Power LED
3. Power ON/OFF Button
4. Power Input Port
5. HDMI Output 1~4 Prot
6. HDMI Input Port
7. HDMI Output 5~8 Prot

Installation and Safety Precautions

• Cables must be placed well, where it would not be stepped on or pinched. Make sure cables are fully inserted into ports.
• To provide sufficient ventilation during use, make sure there is at least 1 inch of clearance on each side of the device (except the side where it rests on a flat surface).
• Do not set up this product adjacent to a water source or an environment that has excessive moisture.
• Do not operate the product when hands are wet.
• Place this product on a flat surface and keep it out of reach of children.
• Turn off the product when it is not in used for an extended period of time.
• Do not attempt to dismantle the product on your own.
• Please use the included power adapter

Connection Diagram

How It Works

1. Connect HDMI source device such as DVD to HDMI Splitter’s input port.
2. Connect your HDTV’s input to HDMI Splitter’s output port.
3. After all the connections have been successfully done, you can watch the HD videos on different HDTVs or displays.

Note: When HDMI Splitter works, make sure the source device such as DVD and display device are well connected with cables, In order to make the relevant interfaces work properly, firstly power on the splitter, then power on the source device.

Troubleshooting

Before power on, please check the connection line carefully. And make sure that all interfaces are correctly connected.

The common trouble shooting way shows below:

1. Check if the power adapter is connected properly.
2. Check the power switch if it is turned on.

No Video or Bad Quality Video|

1. Check if the display is on.
2. Check if the input source is on.
3. Check all cables and make sure they are fully seated into ports.
4. Try changing to a different known good cable.

No Audio or Bad Quality Audio|

1. Check if the audio equipment is on.
2. Check if the input source is on.
3. Check if input source’s audio output setting is setup correctly. Please refer to your input source’s user manual on how to change this setting.
4. Check all cables and make sure they are fully seated into ports.
5. Try changing to a different known good cable.

Recycling the Product

To dispose this product properly, please follow the recycling process regulated in your area.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>