BOSCH SPS4HMI49G Free Standing Dishwasher User Guide

June 1, 2024
Bosch

BOSCH SPS4HMI49G Free Standing Dishwasher

BOSCH-SPS4HMI49G-Free-Standing-Dishwasher-PRODUCT

Specifications:

  • Product: Dishwasher
  • Water Hardness Settings: Soft, Medium, Hard
  • Programmes: Various durations, energy consumptions, and water usage
  • Machine Care Programme: 2 hours 10 minutes, 1.130 kWh energy consumption, 15.0 liters of water

Product Usage Instructions

Setting up Home Connect:

  1. Install the Home Connect app on your mobile device.
  2. Scan the QR code with the Home Connect app.

Overview of Water Hardness Settings:
Refer to the table in the instruction manual for selecting the appropriate water hardness value.

Adding Special Salt:

  1. Unscrew the lid of the special salt dispenser.
  2. Fill the dispenser with special salt just before starting the program.

Adding Rinse Aid:

  1. Press the catch on the lid of the rinse aid dispenser and fill up to the max mark.

Setting the Water Softening System:

  1. Press to open basic settings.
  2. Select the right water hardness setting.
  3. Add special salt and rinse aid to their respective dispensers.
  4. Close the lids of the dispensers.

Programmes:
Choose a programme based on duration, energy consumption, and water usage as per your requirements.

Machine Care:
Run the Machine Care programme periodically to maintain the dishwasher.

How to Use Your Appliance:

  1. Load suitable tableware into the dishwasher.
  2. Add detergent to the dispenser.
  3. Switch on the appliance.
  4. Select a programme based on your needs.
  5. Start the programme and remove tableware at the end.
  6. To cancel a programme, press for approximately 4 seconds.

Cleaning Filters:
Regularly check and clean the filters after each wash cycle to maintain performance.

FAQ:

Q: How often should I add rinse aid?
A: Add rinse aid to the dispenser up to the max mark before starting each program to ensure optimal results.

Before using for the first time, read the instruction manual and the safety information it contains.

Setting up Home Connect

Tip: Connect your appliance to a mobile device. You can conveniently change all settings using the Home Connect app.

  1. Install the Home Connect app on your mobile device and follow the instructions.
  2. Scan the QR code with the Home Connect app.

Overview of water hardness settings

You can find an overview of the water hardness values that can be selected here.
A table of country-specific units can be found in the instruction mantial

BOSCH-SPS4HMI49G-Free-Standing-Dishwasher-FIG- \(3\)

Setting the water softening system

  1. Press .
  2. To open the basic settings, press Setup 3 sec. for 3 seconds.
    • The display shows xx.
    • The display shows set
  3. Press Start repeatedly until the right water hardness has been set.
  4. To save the settings, press Setup 3 sec. for 3 seconds.

Programmes

The programme data has been measured in the laboratory according to European standard EN 60436.
The consumption figures depend on the programme and additional function selected.
The running time will change if the rinse aid system is switched off or rinse aid needs to be added.

BOSCH-SPS4HMI49G-Free-Standing-Dishwasher-FIG- \(5\)

  1. Suitable programme for running at night: it takes longer, but is extremely quiet.

INSTRUCTION

BOSCH-SPS4HMI49G-Free-Standing-Dishwasher-FIG- \(25\)

Adding special salt

To avoid damage to the appliance, only add special salt to the dispenser for special salt just before the programme starts.

  1. Unscrew the lid of the dispenser for special salt and remove.
  2. On initial start-up: Fill the dispenser right up with water.
  3. Add the special salt to the dispenser. The water in the dispenser is displaced and forced out. Never add detergent.
  4. Place the lid back on the dispenser and turn to close.

Adding rinse aid

  1. Press the catch on the lid of the dispenser for rinse aid 1 and lift 2.
  2. Add rinse aid up to the max mark.
  3. Close the lid of the dispenser for rinse aid.
    • The lid clicks into position.

Adding detergent

  1. Add the detergent to the dry detergent dispenser.
  2. Close the lid of the detergent dispenser.
    • The lid clicks into position.

How to use your appliance

  1. Load the tableware.
    Only clean tableware that is suitable for dishwashers. Remove large remnants of food from the tableware. Check that the spray arms can rotate freely.

  2. Add detergent.

  3. Switch on the appliance .

  4. Select the programme.

  5. Start the programme Start.

  6. Remove the tableware at the end of the programme.

  7. To cancel the programme, press Reset 4 sec. for approx. 4 seconds.
    The programme is cancelled and ends after approx. 1 minute.

Cleaning filters

  1. After each wash check the filters for residue
  2. Turn the coarse filter anticlockwise 1 and remove the filter system 2.
  3. Pull down the micro filter to remove.
  4. Press the locking catches 1 together and lift the coarse filter out 2
  5. Clean the filter elements under running water.
  6. Re-assemble the filter system.
  7. Insert the filter system into the appliance and turn the coarse filter clockwise.
    Make sure that the arrow markings match up.

Cleaning spray arms

  1. Unscrew the upper spray arms 1 and pull down to remove 2.
  2. Pull up the lower spray arm to remove.
  3. Check the outlet nozzles on the spray arms for blockages under running water and remove any foreign bodies.
    Insert the lower spray arm.
    The spray arm clicks into position.
    Insert the upper spray arms and screw firmly in place.

Clean wastewater pump

  1. Disconnect the appliance from the power supply.

  2. Remove the filter system.

  3. Scoop out any water.

  4. Prise off the pump cover using a spoon and grip it by the crosspiece.

  5. Lift the pump cover inwards at an angle and remove.

  6. Remove any remnants of food and foreign bodies in the area of the impeller.

  7. Insert the pump cover 1 and press down 2.
    The pump cover clicks into position.

  8. Install the filter system.

Troubleshooting

BOSCH-SPS4HMI49G-Free-Standing-Dishwasher-FIG- \(21\)

BOSCH-SPS4HMI49G-Free-Standing-Dishwasher-FIG- \(22\)

BOSCH-SPS4HMI49G-Free-Standing-Dishwasher-FIG- \(23\)

BOSCH-SPS4HMI49G-Free-Standing-Dishwasher-FIG- \(24\)

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals