Choetech S10W iWatch Magnetic Suction Mobile Power Supply User Manual

June 1, 2024
CHOETECH

Choetech S10W iWatch Magnetic Suction Mobile Power Supply

Choetech-S10W-iWatch-Magnetic-Suction-Mobile-Power-Supply-
product

Product Information

Specifications

  • Dimension: H17W68.5L113MM
  • Weight: 213g
  • Lighting Input: 5V/2A
  • Type-C Input: 5V/3A, 9V/2A, 12V/1.5A PD18W
  • USB Output: 5V/4.5A, 4.5V/5A, 9V/2A, 12V1.5A (22.5W Super fast charge)
  • Type-C & Lighting line Output: 5V/3A, 9V/2.22A, 12V/1.67A PD20W
  • Type-C Output: 5V/3A, 9V/2.22A, 12V/1.67A PD20W
  • Mobile phone wireless output: 15W max. compatibility 10W/7.5W/5W
  • iWatch Watch wireless output: 2.5W MAX
  • Capacity: 10000mAh polymer battery
  • Implementation standard: GB/T35590-2017, GB4943.1-2011

Product Usage Instructions

Electricity Check and Output Control:

  • Press the electricity check button to display the battery percentage.
  • To close the output:
  1. Double click the button continuously when in discharge state.
  2. Output will automatically turn off when the connected device is fully charged.

S10W Endurance

  • When charging via lighting and type-c interfaces, the battery percentage will flash in single digits.
  • Display screen lights up when fully charged to 100% and enters fast charge mode.

Warnings

  • Do not knock, short circuit, disassemble, expose to high temperatures, or water.
  • Stop using immediately if S10W or connected device expands.
  • Keep out of reach of children to avoid accidents.
  • Use a regular brand power adapter for safe charging.

FAQ

  • Q: What should I do if the display screen blinks during discharge?
    A: The display will blink when power is less than 6; this indicates low power and prompts shutdown.

  • Q: How can I close the output on S10W?
    A: Double click the button continuously to close the output during discharge state.

  • Q: What is the maximum wireless output for mobile phones?
    A: The maximum wireless output for mobile phones is 15W with compatibility modes of 10W/7.5W/5W.

S10W iWatch Magnetic
Suction Mobile Power
Supply

Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully before first use and keep this user manual for future reference. Pay particular attention to the safety instructions. If you have any questions or comments about the device, please contact the customer line.

www.alza.co.uk/kontakt
+44 (0)203 514 4411
Importer  Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Prague 7, www.alza.cz

Patent number : ZL 2022 3 0832295.4
Proprietary parent and counterfeits shall be prosecuted.
Please read it carefully before use

  1. Type-c + Lightening Output Line (PD20W)
  2. USB Output Port (22.5W Super Fast Charge)
  3. Lighting input power (5V/2A)
  4. Type-c Port Input (PD18W) Output (PD20W)
  5. LED digital display power
  6. Mobile phone wireless output 15W
  7. iWatch Watch wireless output 2.5W
  8. Switch

Choetech-S10W-iWatch-Magnetic-Suction-Mobile-Power-Supply-
\(1\)

Instruction for use
Open output and display state – the mobile power supply is in hibernation state when in standby mode

  1. Charging interface and charging cable opening mode – automic identification of load, plug and play the display power long bright, fast charging green lighting symbol long bright.
  2. Mobile phone wireless charging opening mode – press a button to open wireless charging withing about 6 seconds. The wireless charging symbol on the display screen flashes for 3 times and then becomes bright.
  3. Watch wireless charging opening mode – button once open wireless charging, display wireless symbol immediately long press the button 3 seconds to open wireless charging watch, watch flat start charging, display power and wireless charging symbol long bright (note: only applicable to the original Apple watch charging).

Remarks

  1. Interface, charging cable, mobile phone wireless charging and watch wireless charging can be output at the same time, any 2 channels can be used at the same time, S10W output without 9V fast charging, each channel is 5V output.
  2. S10W built-in low chip induction, during the discharge process when the power is less than 6, the display will blink until shutdown.

Electricity check
Button once the display screen accurately display the percentage of electricity, about 45 seconds the display screen automatically extinguished.

Three, close the output

  1. When S10W is in discharge state, the output can be closed by double clicking the button continuously.
  2. S10W charges the phone. When the phone is fully charged, it will automatically recognize and turn off the output.

Four, to S10W endurance
When charging lighting and type-c interfaces, the battery percentage of the display screen flashes in single digits. With the increase of the battery, the display screen lights up when it is fully charged to 100, and the green lighting symbol of the display screen lights up when the fast charge is entered.

Protection function

  1. With constant voltage output, overvoltage protection function.
  2. With constant current output, overload protection function (Long press the light touch switch to resume output after output overload is lifted
  3. Output short-circuit protection (short circuit USB output, close the output to protect the product, after the short circuit is removed, long press the tap switch to restore output)
  4. Built-in battery protection (built-in battery has dual protection function of software and hardware)

Product Parameter

  • Dimension H17W68.5L113MM
  • Weight 213g
  • Lighting Input 5V/2A
  • Type-C Input 5V/3A, 9V/2A, 12V/1.5A PD18W
  • USB Output 5V/4.5A, 4.5V/5A, 9V/2A, 12V1.5A
  • 22.5W Super fast charge
  • Type-C & Lighting line Output 5V/3A, 9V/2.22A, 12V/1.67A PD20W
  • Type-C Output 5V/3A, 9V/2.22A, 12V/1.67A PD20W
  • Mobile phone wireless output 15W max. compatibility 10W/7.5W/5W
  • iWatch Watch wireless output 2.5W MAX
  • Capacity 10000mAh polymer battery
  • Implementation standard GB/T35590-2017
  • GB4943.1-2011

Warning
Failure to follow these safety instructions may result in fire, electric shock, and damage to electrical equipment. Do not knock, short circuit, disassemble, put in hight temperature environment, water to avoid danger. If the S10W expands or the charged device expands, stop using it immediately. Keep this product out of reach of children to avoid accidents.
Note: Before charging the mobile device, please check whether the connection cable and adapter are correctly connected. It is recommended to use a regular brand power adapter to charge the mobile device, so as to avoid failure to charge or overload charging and discharging caused by other unqualified power sources.

Warranty Conditions

A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase.
The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:

  • Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
  • Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g., during transport, cleaning by inappropriate means, etc.).
  • Natural wear and aging of consumables or components during use (such as batteries, etc.).
  • Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
  • If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.

EU Declaration of Conformity
This equipment is in compliance with the essential requirements and other relevant provisions of EU directives.

WEEE
This product must not be disposed of as normal household waste in accordance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE – 2012/19 / EU). Instead, it shall be returned to the place of purchase or handed over to a public collection point for the recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. Contact your local authority or the nearest collection point for further details. Improper disposal of this type of waste may result in fines in accordance with national regulations.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals