Kiiroo V2 PowerBlow User Manual
- June 17, 2024
- KIIROO
Table of Contents
Kiiroo V2 PowerBlow
Software notice
The PowerBlow by Kiiroo is to be used with the authorized FeelConnect app and
the VideoWatcher app only. Downloading any third-party applications to control
or interact with the Keon that are not mentioned above is done entirely at
your own risk. If a third-party application is downloaded, and it damages
either the device software or hardware or leads to personal injury, neither
Kiiroo, FeelRobotics nor any of their partners will be held liable.
Hardware notice
The PowerBlow by Kiiroo was designed to be used with original Feel Strokers
only. The usage of any third-party hardware product in combination with the
PowerBlow violates the terms of usage and warranty, and Kiiroo will not be
liable for any damage sustained. National deviation 7.12.Z1 This appliance
contains non-replaceable batteries.
For a part of class III construction supplied from a detachable power supply unit, the instructions state that the appliance is only to be used with the unit provided. The appliance is not to be used by persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction. FeelRobotics and Kiiroo are constantly working to ensure their hardware and software are as secure as possible. We recommend updating your app and device every time there is an update. Keeping your device and app versions up-to-date ensures you have the newest features and guarantees your safety.
Logo usage
Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S.
and other countries. App Store is a service mark of Apple Inc., registered in
the U.S. and other countries. Google Play and the Google Play logo are
trademarks of
Google Inc. The Bluetooth® word mark and logos are registered trademarks owned
by the Bluetooth SIG, Inc. and any use of such marks by Kiiroo is under
license. Other trademarks and trade names are those of their respective owners
Set up your device
Using the USB C cable provided, charge your device until the LED lights on the
top LED ring turn to solid green; about 1 hour. We recommend charging the
device fully before the first use. The charging port can be found on the
PowerBlow (see picture).
While your device is charging
Scan the QR code on the insert found in the box, or go to
www.kiiroo.com to create your user account.
https://www.kiiroo.com/my-account/ .Once you have created an account, please
go to: https://www.kiiroo.com/pages/register-your-device to register your
device and activate your one (1) year warranty. Download the FeelConnect App
so you are ready to pair your PowerBlow with your mobile phone once it is
charged.
Charging port
- Connect the Feel Stroker to PowerBlow.
- Remove the lid and take the sleeve and inner ring out of the Feel Stroker case. Insert the cup into the stroker and clip it in place.
- Slide the inner ring and sleeve back into the stroker case and clip it in place. Unscrew the cap on the base of the Feel Stroker.
- Put the rubber gasket onto the stroker, then screw the
- PowerBlow on top of the Feel Stroker.
- Add water-based lube into the stroker and enjoy!
The PowerBlow by Kiiroo was designed to be used with Feel Strokers. The usage of any third-party hardware product in combination with the PowerBlow by Kiiroo violates the terms of usage and warranty and Kiiroo will not be held liable for any damage sustained.
Replace the absorbent foam
To replace the absorbent foam in PowerBlow, please follow the visual
instructions below.
- Remove the cap at the bottom.
- Replace the absorbent foam and insert the new one into
- PowerBlow as shown in the image.
- Put the cap on and twist it back into place.*Please dispose of the used absorbent foam in a waste bin.
Quick start
- To turn on PowerBlow, press and hold the Power/Mode button on top (approximately 4 seconds) until the device turns on.
- When the device is turned on, PowerBlow is automatically in Interactive/Bluetooth Mode (Go to page 13).
- Press and hold the Power/Mode button for 1 sec. to reach Manual Mode (Go to page 14).
- Press and hold the same button for 1 sec. to reach Automatic Mode. To pause the device, press the Power/Mode button once.
- To turn off PowerBlow, press and hold the Power/Mode button (approximately 4 seconds) until the device turns off.
- The flashing blue light indicates your device is in Interactive Mode and searching to connect to the FeelConnect app via Bluetooth.
Please download the FeelConnect app and follow the instructions in the app to
pair your PowerBlow to the app.
Please note: PowerBlow is compatible with FeelConnect
Feel your partner
When paired online, the complementary devices give you the touch and intimacy
you crave, from anywhere in the world.
Please note
The PowerBlow is only able to be controlled by partner devices using the
FeelConnect app. To control partner devices use the Touch Control function in
the FeelConnect app.
Pairing with Keon
For users who already own Keon, you can now pair your Keon with PowerBlow via
the FeelConnect app to enhance your experience and enjoy the best possible
sensations.
Feel videos
Our exclusively encoded 2D and VR porn videos let you feel what you see on
screen makes you feel like you are there. Encoded interactive content can be
found on several premium adult sites for a monthly fee. Go to
https://www.connect2feel.com/deals to find the best deals for encoded
interactive videos and VR. These paid premium adult sites work with the
FeelConnect app.
Feel videos
Our exclusively encoded 2D and VR porn videos let you feel what you see on
screen making you feel like you are there. Encoded interactive content can be
found on several premium adult sites for a monthly fee. Go to
https://www.connect2feel.com/deals to find the best deals for encoded
interactive videos and VR. These paid premium adult sites work with the
FeelConnect app. PowerBlow’s compatibility with FeelMe AI is coming soon.
Visit FeelMe.com on your Google Chrome Browser to start
your free trial and find out more about the subscription package that suits
your needs. Available on desktop and mobile.
Bluetooth Mode – indicated by a blue light on PowerBlow. Once the device turns on, the LED ring light will blink blue, indicating that the device is discoverable by the FeelConnect app. Once paired with the app, the LED light will turn solid blue. Follow the onboarding instructions in the FeelConnect app to set up your preferred settings. You will be able to enjoy interactive content, connect to your partner and even control your PowerBlow manually using the app.
Manual Mode – indicated by a white light
Press the Power/Mode button for 1 sec. until the LED lights go white. Press
and hold the Arrow up button to create suction. The longer the button is
pressed, the stronger the vacuum created by PowerBlow. The device will retain
the vacuum even after the button is released. Press the Arrow down button once
to release air and stop the vacuum effect. Repeat the process as desired. Do
not connect Keon by Kiiroo and PowerBlow together in manual mode. For optimal
use of both devices together, download the FeelConnect app to pair Keon and
PowerBlow and allow Keon to control PowerBlow.
Available on desktop and mobile
Please note: every user’s optimal intensity differs depending on the diameter of their erect penis.
Bluetooth Mode – indicated by a blue light on PowerBlow.
Once the device turns on, the LED ring light will blink blue, indicating that
the device is discoverable by the FeelConnect app. Once paired with the app,
the LED light will turn solid blue. Follow the onboarding instructions in the
FeelConnect app to set up your preferred settings. You will be able to enjoy
interactive content, connect to your partner and even control your PowerBlow
manually using the app.
Pause Mode
indicated by a blinking purple light To Pause suction, press the Power/Mode
button once. Press the button again to resume operation.
CHARGING AND LED INDICATOR
Insert the USB C cable into your PowerBlow’s charging port. The charging port is located at the back side of your PowerBlow. Insert the other end into a USB port. This can be in a computer or wall adapter. Please note, the wall adapter is NOT included in the box. We recommend using a wall adapter as using a computer will exceed the 1 hour charging time. The LED ring on PowerBlow indicates the battery level and charging progress.
Manual Mode – indicated by a white light
Press the Power/Mode button for 1 sec. until the LED lights go white. Press
and hold the Arrow up button to create suction. The longer the button is
pressed, the stronger the vacuum created by PowerBlow. The device will retain
the vacuum even after the button is released. Press the Arrow down button once
to release air and stop the vacuum effect. Repeat the process as desired.
Automatic Mode – indicated by a pink light
Press and hold the Power/Mode button for 1 sec. again to enter Automatic Mode.
This model has 1 automatic pattern that repeats itself in a constant loop. By
pressing and buttons , the intensity of the vacuum suction will increase or
decrease. For safety reasons, PowerBlow’s intensity is set to 50%. To modify
the device’s intensity features, download and connect to the FeelConnect app.
HANDLING
Use
Please ensure lube is only used on your stroker and not the PowerBlow itself.
Do not use
Silicone lubricant, massage oils or hand creams in your stroker as it will
deteriorate the skin-like sleeve material.
Cleaning the Feel Stroker
Always clean your sleeve thoroughly after each use.
- Remove the Feel Stroker from the PowerBlow.
- Remove the sleeve from the outer casing of the Feel Stroker.
- Rinse the sleeve with warm water and Kiiroo pure intimate toy cleaner or a specialized toy cleaner and allow it to air dry.
- Rinse the outer casing or wipe it down with antibacterial wipes.
- Dry completely before placing the sleeve back in the casing.
- After your sleeve has air-dried, use the FeelNew Renewing
- Powder over your sleeve so that it remains smooth and soft.
Cleaning PowerBlow
PowerBlow is not waterproof. Please use a moist or damp cloth after each use.
DISCLAIMER & WARNINGS
- Do not use the PowerBlow if there are exposed electronic elements.
- Do not use the PowerBlow if you are in a shower, bathtub, swimming pool, sauna, steam room etc.
- The PowerBlow is NOT waterproof.
- Do not use the PowerBlow if it is excessively hot to touch.
- Do not use the PowerBlow or Feel Stroker on inflamed or irritated areas.
- Avoid leaving your PowerBlow in direct sunlight and never expose it to extreme heat.
- Never use cleansers containing alcohol, petrol or acetone.
- Do not use heating appliances to dry the sleeve or device.
- Avoid using harsh soaps as they can damage the sleeve material.
- Always store the device out of reach of children.
Warnings
We, as Kiiroo make no medical claims with our devices. This device is not to
be used by or on minors (anyone under 18), or anyone who is unable or
unwilling to express consent. This device is not intended for persons with
reduced physical, sensory or mental capabilities, or a lack of experience and
knowledge unless they have supervision or instruction concerning the use of
the device by a person responsible for their safety. Kiiroo will not be held
responsible for any undesirable results of misuse.
DISPOSAL SPECIFICATION
While the PowerBlow is made from eco-friendly materials, you should not dispose of the PowerBlow in your waste bin. Like any other electronic device with a rechargeable battery, there are disposal regulations. These regulations vary by local municipality, city and country. Be aware of how electronics are disposed of where you live. Kiiroo suggests you ask your local council centre.
Specifications
Help
If you have any further problems with setup and installation or issues with
using your device, please do not hesitate to contact our Customer Service
team. Our team is there for your support and to explain solutions to your
problems in detail. We try to make your online experience run as smoothly as
possible. We aim to answer all questions within 48 hours of receiving them.
For frequently asked questions visit
www.kiiroo.com/faq
www.kiiroo.com
Contact
info@kiiroo.com
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit of d different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. (Example – use only shielded interface cables when connecting to a computer or peripheral devices). This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
The equipment is used in portable condition. “The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmiter”. This device complies with Part 15 of the FCC Rules. The operation is subject to the following two conditions: This device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation.
SED STATEMENT
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: this device may not
cause interference and this device must accept any interference, including
interference that may cause undesired operation of the device. This device
complies with IC RSS 102 RF exposure requirements for portable use
configuration. The device must not be co-located or operating in conjunction
with any other antenna or transmitter. This device complies with Industry
Canada’s RSS for
licence-exempt radio devices.
Operations are permitted under two conditions the device must not cause interference and the user of the device must accept any radio interference, even if the interference is likely to impair its operation. This device complies with IC’s RFIC 102 exposure requirements, for portable use configuration. The device must not be co-located or operate in conjunction with another antenna or transmitter.
References
- Deals | connect2feel
- Kiiroo
- KIIROO | FAQ - Most Frequently Asked Questions About KIIROO Products | Kiiroo
- Deals | connect2feel
- Account | Kiiroo
- Register Your Kiiroo Device
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>