BOSCH SHS53CD5N Dishwasher User Manual
- June 17, 2024
- Bosch
Table of Contents
- BOSCH SHS53CD5N Dishwasher
- Product Information
- Product Usage Instructions:
- FAQs
- IMPORTANT SAFETY INSTRUCTIONS
- Preventing material damage
- Familiarizing yourself with your appliance
- Dishwasher Cycles
- Options
- Features
- Before using for the first time
- Detergent
- Basic Operation
- Cleaning and maintenance
- Troubleshooting
- Technical specifications
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
BOSCH SHS53CD5N Dishwasher
Product Information
Specifications:
- Model: SHS53CD5N
- Manual Language: English (en-us)
- Manufacturer: Bosch
- Energy-saving features: AquaSensor
Product Usage Instructions:
1. Familiarizing Yourself with Your Appliance:
Before using the dishwasher, take some time to understand the different parts and controls of the appliance.
4.1 Appliance:
Learn about the various components of the dishwasher to ensure proper usage.
4.2 Controls:
Familiarize yourself with the control panel and settings to operate the dishwasher effectively.
2. Before Using for the First Time:
Follow the initial setup instructions provided in the manual before using the dishwasher for the first time.
3. Rinse Aid System:
Understand how to use rinse aid effectively to improve drying performance and prevent water spots on dishes.
9.1 Rinse Aid:
Learn about the purpose of rinse aid and how it helps in the dishwashing process.
9.2 Setting the Amount of Rinse Aid:
Adjust the amount of rinse aid dispensed based on your water hardness level for optimal results.
4. Detergent:
Use the correct detergent and follow guidelines for adding detergent to ensure clean dishes.
10.1 The Correct Detergents:
Refer to the recommended detergents for best results and to avoid damaging the appliance.
10.4 Adding Detergent:
Properly add detergent to the designated compartment in the dishwasher before starting a cycle.
5. Cleaning and Maintenance:
Maintain your dishwasher regularly to ensure optimal performance and longevity.
15.1 Cleaning the Tub:
Clean the interior of the dishwasher periodically to remove any buildup or residue.
15.4 Filter System:
Regularly clean the filter system to prevent clogs and maintain efficient operation.
6. Troubleshooting:
Refer to the troubleshooting section in the manual for common issues and solutions related to your dishwasher.
FAQs
- Q: How often should I clean the spray arms?
- A: It is recommended to clean the spray arms every 2-3 months to ensure proper water flow and cleaning performance.
- Q: Can I use vinegar as a rinse aid alternative?
- A: No, it is not recommended to use vinegar as a rinse aid alternative as it may damage the dishwasher components over time.
Dishwasher
SHS53CD5N [en-us] Use and Care Manual
bosacfpahRmmp-thlehiiyoalgeybnmiooBsceftseoe.pcscarheconrhydmkosju/o:urins/
en-us
Further information and explanations are available online:
IMPORTANT SAFETY INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
Read all instructions carefully before use. These precautions will reduce the
risk of electrical shock, fire and injury to persons. When using kitchen
appliances, basic safety precautions must be followed including those in the
following pages.
1.1Safety definitions
Here you can find explanations of the safety signal words used in this manual.
WARNING This indicates that death or serious injuries may occur as a result of
non-observance of this warning.
CAUTION This indicates that minor or moderate injuries may occur as a result
of non-observance of this warning.
NOTICE: This indicates that damage to the appliance or property may occur as a
result of non-compliance with this advisory.
Note: This alerts you to important information and/or tips.
1.2General information
To reduce the risk of fire, electrical shock, or serious injury, observe the
following. ¡ Read and understand all instructions before using the
appliance. ¡ Keep the provided documents in a safe place for future
reference or for the next owner. ¡ Do not connect the appliance if it has been
damaged in
transit. ¡ Severe product damage and/or injury could result from
the use of unqualified service technicians or nonoriginal parts. All repairs
must be performed by an authorized service provider using only original
equipment factory replacement parts. ¡ NSF/ANSI 184 Certified residential
dishwashers are not intended for licensed food establishments.
1.3Intended use
Only use this appliance: ¡ for cleaning household dishware. ¡ For normal
household use and in enclosed spaces in a
residential environment. ¡ Up to an altitude of 13,100 ft (4000 m) above sea
level.
4
1.4Restrictive Use
This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
1.5Grounding instructions
This appliance must be grounded to a metal, permanent wiring system or an
equipment grounding conductor must be run with the circuit conductors and
connected to the equipment grounding terminal or lead on the dishwasher. See
the Installation Instructions included with this dishwasher for more
information on electrical requirements.
WARNING Improper connection of the equipment grounding conductor can result in
risk of electric shock.
This appliance must be grounded. In the event of a
malfunction or breakdown, grounding will reduce the risk of electric shock by
providing a path of least resistance for electric current. This appliance is
equipped with a cord having an equipment-grounding conductor. Check with a
qualified electrician or authorized service representative if you are in doubt
whether the appliance is properly grounded.
1.6Safe use
Follow these safety instructions when using the appliance.
WARNING To reduce the risk of serious injury, observe the following.
Read all instructions before using this dishwasher. Use this dishwasher only
for its intended function,
which is the washing of household dishware and kitchenware rated as dishwasher
safe.
Only use detergents or rinsing agents recommended
for use in a dishwasher, and keep them out of the reach of children.
Do not abuse, sit or stand on the door or dish racks of
the dishwasher.
en-us
IMPORTANT SAFETY INSTRUCTIONS READ AND SAVE THESE INSTRUCTIONS
WARNING Under certain conditions, hydrogen gas may be produced in a hot water
system that has not been used for two weeks or more. Hydrogen gas is
explosive.
Before using a dishwasher that is connected to a hot
water system that has been unused for two weeks or longer, turn on all hot
water faucets and let the water flow from each for several minutes. This will
release any accumulated hydrogen gas. As the gas is explosive, do not smoke or
use an open flame during this time.
WARNING To avoid risk of electric shock, observe the following.
Only use the appliance in enclosed residential space
according to the installation manual.
Never expose the appliance to intense heat or humidity. Do not use any steam
cleaners or high-pressure
cleaners to clean this appliance. If not followed, excess moisture can
accumulate.
WARNING To avoid risk of injury, when loading items to be washed, observe the
following.
Locate sharp items so they are not likely to damage the
door seal.
Load knives and other sharp utensils with their handles
up to reduce the risk of cut-type injuries.
Do not wash plastic items unless they are marked
“dishwasher safe” or the equivalent. For plastic items not so marked, check
the manufacturer’s recommendations.
Do not operate your dishwasher unless all enclosure
panels are in place.
Do not tamper with or override controls and interlocks.
WARNING For safe care and operation of your appliance, observe the following.
Follow the safety instructions and directions for use on
the detergent and rinse aid product labels.
Do not use harsh chemicals such as bleach-based
products to clean your dishwasher. Some bleach-based products can damage your
dishwasher and may present health hazards!
Always use caution when opening the door during or
following a wash cycle as hot water or steam may escape. Do not fully open the
door until water noises have stopped and steam has subsided.
To avoid floor damage and possible mold growth, do
not allow wet areas to remain around or under the dishwasher.
NOTICE: Water and power shut off
It is highly recommended for the end user to become
familiar with the procedure to shut off the incoming water supply and the
procedure to shut off the incoming power supply. See the installation
instructions or contact your installer for more information.
1.7Risk to children
Follow these safety instructions if there are children in your home.
WARNING To reduce risk of injury to children, observe the following.
Do not allow children to play in or on the dishwasher. When children become
old enough to operate the
appliance, it is the responsibility of the parents/legal guardians to ensure
the children are instructed in safe practices by qualified persons.
Remove the dishwasher door to the washing
compartment when removing an old dishwasher for service or discarding.
1.8State of California Proposition 65 Warnings
This product may contain a chemical known to the State of California, which
can cause cancer or reproductive harm. Therefore, the packaging of your
product may bear the following label as required by California:
5
en-usPreventing material damage
Preventing material damage
2Preventing material damage
Preventing material damage
NOTICE: Harsh chemicals such as bleach-based products can damage your
dishwasher. Do not use harsh chemicals such as bleach-based
products to clean your dishwasher. Certain cleaning products may damage the
appliance. Do not use a steam cleaner. So as not to scratch the finish on the
appliance, do not
use sponges with a rough surface or abrasive cleaning agents. Avoid stainless
steel polish Do not use stainless steel polish on an anti-fingerprint finish
or a black stainless finish. Escaping water vapor can damage cabinetry. When
the program ends, let the appliance cool down a bit before opening the door.
Protect your appliance from the elements. Protect against freezing to avoid
possible damage to the fill valve. Damage caused by freezing is not covered by
the warranty.
Environmental protection and energy-saving
3Environmental protection and energy-saving
Environmental protection and energy-saving
3.1Saving energy
If you follow these instructions, your appliance will use less power and
water.
Use the Normal program. a The Normal program is energy-efficient and
environmentally friendly. “Dishwasher Cycles”, Page 10
3.2AquaSensor
The AquaSensor is an optical measuring device (light barrier) which measures
the turbidity of the washing water. You can save water with the AquaSensor.
The operation of the AquaSensor depends on the selected cycle. If the soiling
level is high, the washing water is drained off and replaced with fresh water.
If the soiling level is lower, the washing water is used in the next rinse, so
reducing water consumption by 3-6 liters. In the Auto cycles the temperature
and run time are additionally adjusted to the level of soiling.
6
Familiarizing yourself with your appliance
4Familiarizing yourself with your appliance
Familiarizing yourself with your appliance
4.1Appliance
Familiarizing yourself with your applianceen-us
6
5
7
4
8
3
9
10 2
11
1 12
1
Detergent dispenser
2
Lower rack
3
Lower spray arm
1 Depending on the appliance specifications
Add detergent to the detergent dispenser. Lower rack Page 12 The lower spray
arm washes the dishware in the lower rack. If the dishware has not been washed
properly, clean the spray arms. “Cleaning the spray arms”, Page 25
7
Familiarizing yourself with your appliance
4
Detergent tab collecting tray
5
Upper rack
6
Silverware drawer
7
Cup shelf1
8
Upper spray arm
9
Filter system
10
Silverware basket
11
Dispenser for rinse aid
12
Rating plate
1 Depending on the appliance specifications
During the wash cycle, detergent tabs automatically drop out of the detergent
dispenser into the tab collecting tray, where they can dissolve fully. Upper
rack Page 11
Silverware drawer Page 13
Cup shelf Page 13
The upper spray arm washes the dishware in the upper rack. If the dishware has
not been washed properly, clean the spray arms. “Cleaning the spray arms”,
Page 25 Filter system Page 24
Silverware basket
Rinse aid is added to the dispenser for rinse aid. “Rinse aid system”, Page 14
Rating plate with E number and FD number Page 34. You will need this data to
contact Customer service Page 33.
4.2Controls
You can use the control panel to configure all functions of your appliance and to obtain information about the operating status.
1
2 3 4 567
A
A
Button
1
ON/OFF button and reset button
2
Cycle buttons
3
Remote Start
8
10 9 8
If you press for approx. 3 seconds, you can open the basic settings.
Switching on the appliance Switching off the appliance Terminating the wash
cycle Page 19
Cycles Page 10
“Remote Start “, Page 23
4
Cycle buttons and options
5
Display for remaining time
6
WLAN display
7
Start button
8
Rinse aid refill indicator
9
Display Sanitize
10
Display Clean
Familiarizing yourself with your applianceen-us
Cycles Page 10 Options Page 11 The displays show the remaining time of the
wash cycle.
Home Connect Page 22 Starting the wash cycle Page 19 Rinse aid system “Adding
rinse aid”, Page 14 The indicator lights up at the end of the program
Sanitize.
Once the wash cycle has ended, the display lights up.
9
en-usDishwasher Cycles
Dishwasher Cycles
5Dishwasher Cycles
Dishwasher Cycles
Below is an overview of the different cycles available on your dishwasher. The
running time may vary depending on the cycle selected. The running time
depends on the water temperature, the quantity of dishware, the level of dirt
and the option selected. The running time will change if the rinse aid system
is switched off or rinse aid needs to be added. The consumption values relate
to normal conditions and a water hardness of 16 – 20 °E. Different influencing
factors such as water temperature or pipe pressure may result in deviations.
Cycle Heavy
Auto Normal Speed 60® Favorite
Purpose
Cycle sequence
Dishware: ¡ Washing pots and pans,
non-fragile dishware and silverware Level of soiling: ¡ Removing stubborn
burned or dried on food remnants containing starch and protein.
Dishware: ¡ Cleaning mixed dishware
and silverware. Level of soiling: ¡ Removing common
household food remnants lightly dried-on.
Dishware: ¡ Cleaning mixed dishware
and silverware. Level of soiling: ¡ Removing common
household food remnants lightly dried-on.
Dishware: ¡ Cleaning mixed dishware
and silverware. Level of soiling: ¡ Removing common
household food remnants lightly dried-on.
–
Intensive ¡ Pre-Rinse ¡ Cleaning 151 °F 160 °F ¡ Intermediate rinse ¡ Final
rinse 162 °F ¡ Drying
Sensor controlled: ¡ Optimized by sensors depending on
the soiling of the rinse water.
Most economical cycle: ¡ Pre-Rinse ¡ Cleaning 122 °F 131 °F ¡ Intermediate
rinse ¡ Final rinse 154 °F ¡ Drying
Time-optimized: ¡ Cleaning 122 °F ¡ Intermediate rinse ¡ Final rinse 158 °F ¡
Drying
–
Usage 1) Hour/min. 2) Electrical/kWH 3) Water/gal ¡ 1) 1:50 – 2:15 ¡ 2) 1.100
– 1.150 ¡ 3) 4.9 – 6.4
¡ 1) 1:45 – 2:09 ¡ 2) 0.880 – 0.970 ¡ 3) 3.4 – 6.4 Note: The displayed cycle
time indicates an average value. ¡ 1) 2:10 – 2:15 ¡ 2) 0.770 – 0.850 ¡ 3) 2.3
– 5.5
¡ 1) 1:00 ¡ 2) 0.710 ¡ 3) 3.8
¡ 1) 1:45 – 2:09 ¡ 2) 0.880 – 0.970 ¡ 3) 3.4 – 6.4
5.1Energy Guide
The Energy Guide label was based on the Normal soil sensing cycle. The unit
was tested without any rinse aid (liquid) in the rinse aid dispenser. A single
dose of detergent was inserted into the detergent dispenser, with no detergent
being used in the prewash. The unit was not subjected to truncated testing per
the definitions in the test procedure. We recommend that dish loads such as
the one in the energy certification test have the rack position set in the
10
highest position. Recommended for daily, regular or typical use to completely wash a full load of normally soiled dishes.
5.2Favorite
With this function, you can save a combination of a Cycle and an Option. You
can save the selected Cycle and Option combination via the Home Connect app.
Tip: You can use the Home Connect app to download additional Cycles and
Options and save them. 1
Options
6Options
Options
Here is an overview of the different options available on
your dishwasher.
Option Extra Dry
Use
¡ For a better drying result, the final rinse temperature is increased and the
drying phase extended.
¡ Especially suitable for drying plastic parts.
Option Sanitize
Optionsen-us
Use
¡ There is a slight increase in energy consumption and the run time is
extended.
¡ To ensure a higher hygiene status for the appliance and dishware, the
temperature is increased and maintained for an extra-long period.
¡ Especially suitable for cleaning chopping boards or baby bottles.
¡ Continuous use of this option improves the hygiene status.
¡ This will increase the run time and energy consumption.
WARNING Concerning dishware sanitation, be aware of the following. Only
sanitizing cycles have been designed to meet the
requirements for soil removal and sanitation efficacy. There is no intention,
either directly or indirectly, to imply that all cycles on a certified machine
have passed the sanitization performance test.
Features
7Features
Features
You can find an overview of the possible features of your appliance and how to
use them here. These features depend on your appliance model.
7.1Upper rack
Arrange cups, glasses, and small tableware items in the top rack.
You can adjust the height of the upper rack to make room for larger items.
Adjusting upper rack with RackMatic® To wash large items in the racks, adjust
the shelf height of the upper rack.
1 Depending on the appliance specifications 11
en-usFeatures
1. Pull out the upper rack. 2. To prevent the rack from suddenly dropping
down, hold
the side of the rack by the top edge. 3. Press in the right and left hand
levers on the outside of
the rack.
7.2Lower rack
Arrange pans and plates in the lower rack.
a
4. Raise or lower the rack evenly to the right level.
Silverware basket 1
7.3Silverware Basket
Arrange the silverware in the silverware basket, ensuring that the items are
not nestled together and with the sharp points down.
WARNING The sharp points and edges of knives and other sharp utensils can
cause serious injury. Load knives and other sharp utensils with edges down.
Do not allow children to handle or play near knives and sharp utensils
Check that the rack is level on both sides. 5. Release the levers. a The rack clicks into position. 6. Slide the rack in.
1 Depending on the appliance specifications 12
7.4Silverware drawer
Arrange silverware in the silverware drawer.
Featuresen-us
7.6Flip tines
Use the flip tines to position dishware securely, e.g. plates.
Arrange silverware with the points and sharp edges down.
7.5Cup shelf
Use the cup shelf and the space underneath for small cups and glasses or for
large items of silverware, e.g. cooking spoons or serving cutlery.
You can fold the tines down to arrange pans, bowls and glasses better.1
Folding down the tines1 If you do not need the tines, fold them down. 1. Push
the lever forward and fold down the tines .
If you do not need the cup shelf, you can fold it down.
7.7Rack heights
Set the racks at the right height.
Appliance height 34″ with silverware basket
Setting 1 max. ø 2 max. ø 3 max. ø
Upper rack 24 cm / 9.5″ 26.5 cm / 10.5″ 29 cm / 11.5″
2. To use the tines again, fold them back up. a The tines click into
position.
Lower rack 33 cm / 13″ 30.5 cm / 12″ 28 cm / 11″
1 Depending on the appliance specifications 13
en-usBefore using for the first time
Appliance height 34″ with silverware drawer
Setting 1 max. ø 2 max. ø 3 max. ø
Upper rack 18 cm / 7″ 20.5 cm / 8″ 23 cm / 9″
Tip: If you remove the 3rd rack, you can place large items of dishware in the lower rack.
Lower rack 33 cm / 13″ 30.5 cm / 12″ 28 cm / 11″
1. Press the catch on the lid of the dispenser for rinse aid and lift .
Before using for the first time
8Before using for the first time
Before using for the first time
8.1Initial use
Before the first use, or after a factory reset, you will need to configure the
settings.
Tip: Connect your appliance to a mobile device. You can conveniently change
all settings using the Home Connect® app. “Home Connect® quick start”, Page 23
Requirement: The appliance has been installed and connected.
1. Add rinse aid. Page 14 2. Switch on the appliance. 3. Set the amount of
rinse aid. Page 14 4. Add detergent. 5. Start the Program with the highest
cleaning temperature
without dishware. To remove any marks from water or other residues, we
recommend you operate the appliance without dishware before using it for the
first time.
Tip: You can change these settings and other Basic settings Page 21 at any
time.
2
1
2. Add rinse aid up to the max mark.
max
Rinse aid system
9Rinse aid system
Rinse aid system
9.1Rinse aid
For optimum drying results, use rinse aid. Only use rinse aid intended for
household dishwashers.
Adding rinse aid If the rinse aid refill indicator lights up, fill the
dispenser with rinse aid. Only use rinse aid intended for household
dishwashers.
3. If rinse aid spills out, remove it from the tub.
Spilled rinse aid can cause excessive frothing during the wash cycle. 4. Close
the lid of the dispenser for rinse aid. a The lid clicks into position.
9.2Setting the amount of rinse aid
If there are streaks or water spots on dishware, change
the amount of rinse aid.
1. Press
.
14
2. To open the appliance1sett2ings,3press the button for 3
seconds.
A
a The refill indicator for rinse aid flashes.
3. Press
repeatedly1until2the 3right amount of rinse aid
has been set.
123
A
0, 1, 2 or 3 LEDs will light up accordingly. The factory setting is level 2.
A low setting adds less rinse aid during the wash
cycle and reduces streaking on dishware. A higher setting adds more rinse
aid during the wash
A cycle, reduces water spots and improves the drying
result.
4. To store the setting, press the button for 3 seconds.
9.3Switching off the amount of rinse aid to be dispensed
1. Press
.
2. To open the appliance1sett2ings,3press
seconds.
button for 3
A
a The refill indicator for rinse aid flashes.
3. Press
repeatedly until no LED lights up.
a The rinse aid system is switched off and the rinse aid refill indicator is deactivated.
4. To store the setting, press button for 3 seconds.
A
Detergenten-us
Detergent
10Detergent
Detergent
Find out which detergents are suitable for your appliance.
10.1The correct detergents
Only use detergents that are made for dishwashers, either basic or combination
detergents. For the best washing and drying results, use a separate detergent,
then add Rinse aid Page 14 separately. Modern, powerful detergents mainly use
a low-alkaline formulation with enzymes. Enzymes break down starch and remove
protein. Oxygen-based bleaching agents are generally used to remove colored
stains, e.g. tea or ketchup.
Note: Follow the manufacturer’s instructions for each detergent.
Detergent Tabs
Powder detergent Liquid detergent
Description
Tabs are perfect for all cleaning functions and do not need to be measured
out. However, with shorter Cycles Page 10 sometimes tabs do not dissolve
entirely and leave residues of detergent. This may reduce its effectiveness.
Powder detergent is recommended for shorter cycles. The dosage can be adjusted
to the level of soiling.
Liquid detergent works faster and is recommended for shorter cycles without a
pre-rinse. Sometimes liquid detergent may leak out despite the detergent
dispenser being closed. This is not a problem, just remember the following: ¡
Only choose a cycle without
PreRinse. ¡ Do not use the Delay Start option.
The dosage can be adjusted to the level of soiling.
10.2Incompatible detergents
Do not use a detergent which is not designated for dishwasher use or contains chlorine.
Detergent Liquid hand soap
Detergent containing chlorine
Description
Liquid hand soap can cause increased frothing and damage the appliance.
This may leave chlorine residue on dishware.
15
en-usDishware
10.3Information on Detergent
Follow the instructions on detergents in everyday use. ¡ Detergents marked as
“ecological” (environmentally
friendly) generally contain lower levels of active agents or none at all. The
cleaning effect may be reduced. ¡ Adjust the rinse aid and the water softening
system settings in accordance with the detergent or combination detergent in
use. ¡ Any rinse aid component of a combination detergent has limited
effectiveness. You will have better results using a separate rinse aid. ¡ To
prevent sticking, only touch detergents in a watersoluble pouch with dry hands
and only ever place them in a dry detergent dispenser. ¡ Even if the rinse aid
and special salt refill indicators light up, the wash cycles will run properly
with combination detergents. ¡ Use tablets with enhanced drying results.
10.4Adding Detergent
1. To open the detergent dispenser, press the locking latch.
2. Add the detergent to the dry detergent dispenser.
3 tbsp (45 ml) 1.75 tbsp
(25 ml)
1 tbsp (15 ml)
3. Close the lid of the detergent dispenser.
a The lid clicks into position.
a The detergent dispenser will open automatically at the optimum time during
the cycle. Powder or liquid detergent will spread around the washing tank and
dissolve there. Tablets will fall into the tablet collecting tray and dissolve
in the right dosage. In order to ensure that tablets can dissolve evenly, do
not place any other objects in the tablet collecting tray.
10.5Detergent table
Detergent amount guidelines
Note: This dishwasher provides the optimum cleaning performance without the use of a prewash detergent and further enhances our standards of sustainability and efficiency.
Auto Normal Heavy Speed 60®
1.75 Tbsp (25 ml) or 1 tab 1.75 Tbsp (25 ml) or 1 tab 3 Tbsp (45 ml) or 1 tab 1 Tbsp (15 ml)
If you are using tablets, one is enough. Insert the tablets in a horizontal position. If you are using powder or liquid detergent, follow the manufacturer’s instructions and quantities for dosage in the detergent dispenser. 1.5 to 1.75 Tbsp (20 ml 25 ml) detergent is sufficient for normal soiling. If dishware is only lightly soiled, slightly less than the amount of detergent specified is usually sufficient.
Dishware
11Dishware
Dishware
Only wash dishware that is suitable for dishwashers.
Note: Decorated glassware and parts made of aluminum or silver may fade or
discolor with dishwashing. Delicate types of glass may turn cloudy after a few
wash cycles.
11.1Damage to glass and dishware
Only put glasses and china in the dishwasher if they are labeled dishwasher- safe. Avoid damage to glass and dishware.
Cause
The following types of dishes are not dishwashersafe: ¡ Wooden utensils and
dishes
Recommendation
Only put dishes in the dishwasher if they are labeled dishwasher-safe.
16
Cause
Recommendation
¡ Decorative glassware, antique dishes and artistic hand-made pottery
¡ Plastic parts that are not heat-resistant
¡ Dishes made from copper or tin
¡ Dishes soiled with ash, wax, grease or paint
¡ Very small items of dishware
The chemical composition of the detergent causes damage.
Use a detergent labeled as gentle to dishes.
Highly caustic alkaline or highly acidic cleaning solutions, in particular commercial or industrial cleaners, are not safe to use in the dishwasher with aluminum.
If you use highly caustic alkaline or highly acidic cleaning solutions, in particular commercial or industrial cleaners, do not put anything aluminum in the dishwasher.
The water temperature of the cycle is too high.
Select a cycle with lower temperatures. After the cycle has ended, take glassware and silverware out of the appliance without delay.
The water temperature of Select a cycle with lower
the cycle is too high and the temperatures.
water is too soft.
Use detergent with glass
protection.
11.2Loading dishware
Arrange dishware correctly to optimize the dishwashing result and prevent
damage to both dishware and the appliance. The noise level may also vary
depending on the items placed in your dishwasher.
NOTICE: Avoid dishwasher damage Do not load the dishwasher with paper
products, plastic
bags, packing materials or anything other than normal, dishwasher safe
dishware and kitchenware.
Tips ¡ Using the appliance allows you to save energy and
water compared to doing dishes by hand. ¡ See our website for examples of how
to load your
appliance efficiently. ¡ To save energy and water, load the machine with the
number of place settings specified (standard load with dishes and silverware).
Dishwareen-us ¡ For better washing and drying results, position items
with curves or recesses at an angle so water can run off.
1. Remove large remnants of food from dishware. To save resources, do not
pre-rinse dishware under running water.
2. Observe the following when arranging dishware: Put heavily soiled
dishware in the lower rack, e.g. pans. The more powerful spray jet ensures
that the dishwashing result will be better. To avoid damage to dishware,
arrange it so it is stable and cannot tip over. To avoid injury, arrange
silverware with the points and sharp edges facing down. Position containers
with the openings facing down so no water can collect in them. Do not block
the spray arms – make sure that they can turn freely. Do not place small
parts in the collecting tray and do not block it with dishware so as not to
obstruct the lid of the detergent dispenser.
17
en-usDishware
11.3Removing dishware
CAUTION Dishes can be very hot immediately after the cycle ends. Open the door
slightly and allow dishes to cool for a few
minutes before unloading.
1. To prevent water dripping onto dishware, unload it starting at the bottom
and working up.
2. Check the washing tank and accessories for soiling and clean if necessary.
“Cleaning and maintenance”, Page 24
11.4Loading patterns
Recommended loading patterns.
12 place settings: Lower rack
Third rack
Additional loading patterns for 10 place settings: Lower rack
Upper rack
Upper rack
18
Third rack
Basic Operationen-us
12.4Setting options
You can set options to complete the chosen wash program. Note: The available
options depend on which program is selected. Press the button for the relevant
option. a The option is set and the option button flashes.
12.5Setting the time delay
You can delay the start of the wash cycle via the Home Connect® app. Open the
Home Connect® app and select the
appliance.
In the settings, you can use the time delay function to delay the start of the
wash cycle.
Basic Operation
12Basic Operation
Basic Operation
12.1Protection against unintentional operation
Your dishwasher has a built in feature to help prevent
unintentional operation, e.g. by children. After starting the
appliance, the door has to be closed within 4 seconds,
otherwise the operation will be paused. If this occurs,
follow the steps below to restart your dishwasher.
1. For top button controls: Press
and close the door.
2. For front button controls: Close the door and press .
a The wash cycle will resume.
Notes ¡ Unintentional operation is activated when:
Pressing Start to begin a wash cycle Setting Delay time and pressing Start
Opening the door while Delay time is active Opening the door during a wash
cycle. ¡ This feature cannot be deactivated.
12.2Switching on the appliance
Touch
with a short 1 second touch.
The cycle last selected and the option last selected will be set by default.
The buttons on the appliance are touch sensitive and
only require a quick, gentle touch.
If you do not perform any actions on the appliance for
10 minutes, it will automatically switch off.
12.3Setting a cycle
To adjust the wash cycle to the soiling level of the dishware, select a
suitable program. Press the right cycle button. a The cycle is set and the
cycle button flashes.
12.6Starting the wash cycle
Press .
a While the wash cycle is running, a spot of light is projected onto the floor
below the appliance door. This light will not be visible if the appliance is
installed at eye level with the cabinet front fitted flush.
a The wash cycle has ended when no displays on the controls are lit.
a The wash cycle has ended when the spot of light is no longer visible on the
floor.
Notes ¡ If you want to add more dishware while the appliance is
running, do not use the collecting tray as a handle for the upper rack. You
might touch the partially dissolved tablet. ¡ You can only change a cycle in
progress if you can cancel it first. “Terminating the wash cycle”, Page 19 ¡
To save energy, the appliance switches off automatically 10 minutes after the
end of the wash cycle. If you open the appliance door immediately after the
wash cycle has ended, the appliance will switch off after 4 seconds.
12.7Interrupting the wash cycle
1. Press On/Off.
The program is saved and the appliance switches off.
2. Press On/Off.
3. Press
to resume the wash cycle.
12.8Terminating the wash cycle
To end a cycle early or to switch from one that has already
started, you will need to cancel it first.
Press
for approx. 4 seconds.
a All displays light up.
a As soon as the displays are off, the residual water is
pumped out.
19
en-usBasic Operation a The cycle is cancelled and ends after approx. 1 minute.
12.9Switching off the appliance
CAUTION To avoid risk of injury, always use caution when opening the door
during or following a wash cycle as hot water or steam may escape. Do not
fully open the door until water noises have
stopped and steam has subsided. 1. Please note the information on Preventing
Material
Damage Page 6. 2. Press On/Off.
20
Basic settings
13Basic settings
Basic settings
You can configure the basic settings for your appliance to meet your needs.
Basic settingsen-us
13.1Overview of the basic settings
The basic settings depend on the features of your appliance.
Basic setting Rinse aid disp.
Intensive drying
Selection Scale with 4 levels
On Off 1
Signal volume Wi-Fi
Scale with 4 levels
On Off 1
Factory setting
Reset
1 Factory setting (may vary according to model)
Description
Set or switch off the amount of rinse aid to be dispensed. “Setting the amount
of rinse aid”, Page 14
Switch intensive drying on or off for each operation. The temperature in the
final rinse is increased for a better drying result. This may increase the run
time slightly.
Note: Please take care with delicate dishware. “Setting intensive drying”,
Page 21
Adjusting the signal volume. “Setting the signal volume”, Page 22
Switch the wireless network connection on or off. “Setting Wi-Fi”, Page 21 The
basic setting is not available until you have connected the appliance with the
Home Connect® app. “Home Connect® “, Page 22
Restore changed settings to the factory settings. The settings for initial use
must be configured.
Tip: Connect your appliance to a mobile device. You can conveniently change all settings using the Home Connect® app. “Home Connect® quick start”, Page 23
Setting intensive drying
1. Press
.
2. To open the appliance1sett2ings,3press
seconds.
button for 3
3. Press button repeatedly until the Clean and Sanitize
LEDs flash.
123
4. Press
button repeatedly until the LED (1) lights up.
1
A
a The refill indicator for rinse aid flashes.
If the LED is not lit up, intensive drying is switched off. If the LED is lit up, intensive drying is switched on. 5. To store the settings, press button for 3 seconds.
Setting Wi-Fi
1. Press
.
A
21
en-usHome Connect®
2. To open the appliance1sett2ings,3press
seconds.
button for 3
4. Press the
button 1repe2atedl3y until the right signal
volume has been set.
123
A
a The refill indicator for rinse aid flashes.
3. Press button repeatedly until the Rinse Aid and
Sanitize LEDs flash. 1 2 3
4. Press
button repeatedly until the LED (1) lights up.
1
A
0, 1, 2 or 3 LEDs will light up accordingly. The selected signal tone will sound. The factory setting is level 2. 5. To store the setting, press the button for 3 seconds.
Restoring 1. Press
factory .
settingAs
2. To open the appliance1sett2ings,3press the
seconds.
button for 3
If the LED is not lit up, Wi-Fi is switched off. If the LED is lit up, Wi-Fi is switched on. 5. To store the settings, press button for 3 seconds.
Setting the signal volume
1. 2.
Press To open
the
app.liance1setAt2ings,3press
the
seconds.
button for 3
A
a The refill indicator for rinse aid flashes.
3. Press the button repeatedly until the Clean, Rinse Aid
and Sanitize LEDs flash.
4. Press the
button.
a The LEDs flash. The a1pplia2nce 3is reset to factory
settings.
1
A
23
A
a The refill indicator for rinse aid flashes. 3. Press the button repeatedly
until the Clean and Rinse
Aid LEDs flash.
Home Connect®
A
14Home Connect®
Home Connect®
This appliance is network-capable. Connecting your
appliance to a mobile device lets you control its functions
A via the Home Connect® app.
The Home Connect® services are not available in every
country. The availability of the Home Connect® function
depends on the availability of Home Connect® services in
your country. You can find information on this at:
22
To be able to use Home Connect®, you must first set up the connection to the
WLAN home network (Wi-Fi 1) and to the Home Connect® app.
The Home Connect® app guides you through the entire registration process.
Follow the instructions in the Home Connect® app to implement the settings.
Tips ¡ Consult the Home Connect® documents supplied. ¡ Follow the instructions
in the Home Connect® app as
well. Note: Also note the safety information in this instruction manual and
ensure that it is also observed when operating the appliance using the Home
Connect® app.
14.1Home Connect® quick start
Connect your appliance to a mobile device quickly and easily.
Setting up the Home Connect® app 1. Install the Home Connect® app on your
mobile device. 2. Start the Home Connect® app and set up access for
Home Connect®. The Home Connect® app guides you through the entire
registration process.
Setting up Home Connect® Requirements ¡ The Home Connect® app is installed on
your mobile
device. ¡ The appliance receives signals from the WLAN home
network (Wi-Fi) at its installation location. ¡ The appliance door is closed.
- Open the Home Connect® app and scan the following
QR code.
2. Follow the instructions in the Home Connect® app.
14.2Home Connect® settings
Adapt Home Connect® to your needs. You can find the Home Connect® settings in the basic settings for your appliance. Which settings the display shows will depend on whether Home Connect® has been set up and whether the appliance is connected to your home network.
1 Wi-Fi is a registered trade mark of the Wi-Fi Alliance.
Home Connect®en-us
14.3Remote Start
You can use the Home Connect® app to start the appliance with your mobile
device.
Note: You can change settings using the Home Connect® app.
Activating Remote Start Requirements ¡ The appliance is connected to your WLAN
home
network. ¡ The appliance is connected to the Home Connect® app. ¡ A program is
selected.
Press . If you open the appliance door, the function is automatically
deactivated.
a button lights up.
Tip: To deactivate the function, press .
Note The following settings are possible using the Home Connect® app: ¡
Deactivate the function permanently. ¡ Select the function using the button.
This setting is
the default preset at the factory. ¡ Activate the function permanently. With
this setting
pressing button is not necessary.
14.4Remote Diagnostics
The Customer Service can access your appliance via Remote Diagnostics if you
ask them to do so, if your appliance is connected to the Home Connect® server
and if Remote Diagnostics is available in the country where you are using the
appliance.
Tip: Further information and details about the availability of Remote
Diagnostics in your country can be found in the Service/Support section of
your local website: www.homeconnect.com.
14.5Software update
You can use this function to update the software of your appliance, e.g. for
optimization, troubleshooting or safetyrelevant updates. The Home Connect® app
informs you about available software updates.
14.6Data Protection
Please see the information on data protection. The first time your appliance
is registered on a home network connected to the Internet, your appliance will
transmit the following types of data to the Home Connect® server (initial
registration): ¡ Unique appliance identification (consisting of appliance
codes as well as the MAC address of the installed Wi-Fi communication module).
23
en-usCleaning and maintenance
¡ Security certificate of the Wi-Fi communication module (to ensure a secure
data connection).
¡ The current software and hardware version of your appliance.
¡ Status of any previous reset to factory settings.
This initial registration prepares the Home Connect® functions for use and is
only required when you want to use the Home Connect® functions for the first
time.
Note: Please note that the Home Connect® functions can be utilized only with
the Home Connect® app. Information on data protection can be called up in the
Home Connect® app.
15.4Filter system
The filter system removes coarse soiling from the dishwashing cycle.
3
2
Cleaning and maintenance
15Cleaning and maintenance
Cleaning and maintenance
To keep your appliance working efficiently for a long time, it is important to
clean and maintain it carefully.
15.1Cleaning the tub
WARNING Using detergents containing chlorine may result in harm to health.
Never use detergents containing chlorine.
1. Remove any heavy soiling in the interior with a damp cloth.
2. Add detergent to the detergent dispenser. 3. Select the program with the
highest temperature. 4. Start the program without dishware. Page 19
15.2Cleaning agent
Only use suitable cleaning agents to clean your appliance. “Preventing
material damage”, Page 6
15.3Tips on appliance care
Follow the tips on appliance care to make sure your appliance functions properly at all times.
Action
Benefit
Regularly wipe the door seals, the front of the dishwasher and the control panel using a damp cloth and dishwashing liquid.
This ensures the parts of the appliance will remain clean and hygienic.
If the appliance is not going This will prevent unpleasant
to be used for a while,
odors.
leave the door slightly ajar.
1
1 Micro filter 2 Fine filter 3 Coarse filter
Cleaning filters Debris in the rinsing water can block the filters. 1. Check
the filters for residues after each dishwashing
cycle. 2. Turn the coarse filter counterclockwise and take out
the filter system . Ensure that foreign objects do not fall into the sump.
2
1
24
3. Pull the micro filter downward and off.
Cleaning and maintenanceen-us
15.5Cleaning the spray arms
Limescale and soiling in the dishwashing water may block the nozzles and
bearings on the spray arms. Clean the spray arms regularly. 1. Unscrew the
upper spray arm and pull down to
remove .
4. Press the locking catches together and take the coarse filter upward and
out .
2
1
1
2
2. Pull up the lower spray arm to remove.
5. Clean the filter elements under running water.
Carefully remove the rim of debris between the coarse filter and the fine
filter. 6. Put the filter system back together.
Ensure that the locking catches on the coarse filter click into position. 7.
Insert the filter system into the appliance and turn the coarse filter
clockwise.
Ensure that the arrow markings match up.
3. Check the outlet nozzles on the spray arms for blockages under running
water and remove any foreign objects.
4. Insert the lower spray arm.
a The spray arm clicks into position. 5. Insert the upper spray arm and screw
firmly in place.
25
en-usTroubleshooting
Troubleshooting
16Troubleshooting
Troubleshooting
You can eliminate minor issues on your appliance yourself. Please read the
information on eliminating issues before contacting Customer Service. This may
avoid unnecessary repair costs.
Issue
Cause and troubleshooting
Four vertical LED’s (i.e. the cycle duration indicators and the clean indicator) all light up at the same time.
Not an appliance error. Garbage disposal is still plugged or the drain hose is
kinked.
Check that the garbage disposal plug is removed and that the drain hose is not
kinked.
Not an appliance error. The drain pump cover is loose or a foreign object is
blocking the pump.
Secure the cover of the drain pump so it clicks into place or clean the drain
pump.
Filters in the water connection of the supply or AquaStop hose are blocked. 1.
Switch off the appliance. 2. Pull out the power cord plug. 3. Turn off the
water faucet. 4. Unscrew the water connection. 5. Remove the filter from the
supply hose.
6. Clean the filter. 7. Reinsert the filter in the supply hose. 8. Screw the
water connection back on. 9. Check the water connection for leaks. 10.Restore
the power supply. 11.Switch the appliance on. Inlet hose is kinked. Install
the inlet hose without kinks. Water faucet is turned off. Turn on the faucet.
26
Troubleshootingen-us
Issue Four vertical LED’s (i.e. the cycle duration indicators and the clean
indicator) are all flashing.
Dishware is not dry.
Cause and troubleshooting
There is a technical issue.
1. Press
.
2. Pull out the power cord plug of the appliance or switch off the breaker.
3. Wait at least 2 minutes.
4. Insert the power cord plug of the appliance in a power outlet or switch on the
breaker.
5. Switch the appliance on.
6. If the problem occurs again:
Press
.
Turn off the water faucet.
Pull out the power cord plug.
Contact customer service Page 33 and give the error code.
No rinse aid used or dosage set too low. 1. Add Rinse aid Page 14.
2. Set the amount of rinse aid to be dispensed. “Setting the amount of rinse
aid”, Page 14
Cycle or cycle option has no drying phase, or drying phase is too short.
Select a wash cycle with drying. Page 10
Some option buttons decrease the drying result.
Water collects in recesses of dishware or silverware. Position dishware at an angle where possible.
Silverware is not dry.
Appliance interior still wet after wash cycle.
The combined detergent used has a poor drying performance. 1. Use rinse aid to
improve drying performance. 2. Use a different combined detergent with a
better drying performance.
Extra Dry/intensive drying not activated to improve drying performance.
Activate Extra Dry/intensive drying.
Dishware removed too early or drying process not yet ended. 1. Wait until the
program ends. 2. Only remove dishware 30 minutes after the program has ended.
Rinse aid used has a limited drying performance. Use a name-brand rinse aid.
Eco products may have limited effectiveness.
Silverware not arranged properly in the silverware basket or silverware
drawer. Droplets can form on the contact points of silverware. 1. Arrange
silverware individually where possible. Page 17 2. Avoid points of contact.
Not an error. Condensation drying creates water droplets in the tub. This is
normal. Moisture in the air condenses on the inside walls of the appliance,
runs off, and is pumped out. No action required.
27
en-usTroubleshooting
Issue Food remnants on dishware.
Cause and troubleshooting
Dishware was placed too close together or rack is overfilled. 1. Arrange
dishware with sufficient space in between.
The spray jets must reach the surfaces of the dishware. 2. Avoid points of
contact.
Spray arm rotation of the lower spray arm is blocked. Arrange dishware so it
does not obstruct spray arm rotation.
Spray arm nozzles are blocked. Clean the Spray arms Page 25.
Filters are dirty. Clean the filters.
“Cleaning filters”, Page 24
Filters are inserted incorrectly and/or not engaged. 1. Insert the filters
properly.
“Filter system”, Page 24
2. Twist filters into place.
Selected wash cycle is too light. Select a more intensive wash program.
Dishware has been precleaned too intensively. Then the sensors choose a lighter cycle. Stubborn remnants cannot be entirely removed. Only remove large remnants of food and do not pre-rinse dishware.
Tall narrow containers in corner areas are not rinsed out adequately. Do not position tall narrow containers at too great an angle or in corner areas.
Upper rack on right and left not set to same height. Set the upper rack on the
left and right to the same height.
“Upper rack”, Page 11
Detergent residue in the appliance
Lid of the detergent dispenser is blocked by items of dishware and will not
open. 1. Arrange dishware in the upper rack so the tab collecting tray is not
obstructed by
dishware. “Loading dishware”, Page 17
Items of dishware are blocking the dispenser lid. 2. Do not place dishware or
fragrance dispensers in the tab collecting tray.
Water spots on plastic parts.
The lid of the detergent dispenser is blocked by the tab and will not open.
Position the tab in the detergent dispenser crosswise, not vertically.
Tabs are used in the quick or short cycle. There is not enough time for the
tab to dissolve. Select a more intensive Wash cycle or use Powder detergent.
Detergent may lose its cleaning or dissolving ability after being stored a
long time, or the detergent is clumped together. Change your Detergent.
Droplet formation on plastic surfaces is unavoidable due to the laws of
physics. Water spots are visible after drying. Select a more intensive
program. Position dishware at an angle.
“Loading dishware”, Page 17
Use rinse aid. “Rinse aid”, Page 14
28
Troubleshootingen-us
Issue
Cause and troubleshooting
Wipeable or water-soluble coatings There is detergent residue. These coatings cannot generally be removed with
inside the appliance or on the
chemicals.
door.
Change your Detergent.
Scrub the appliance by hand.
There are stubborn white coatings on the dishware, inside the appliance or on the door.
There is detergent residue. These coatings cannot generally be removed with chemicals. Change your Detergent. Scrub the appliance by hand.
Too little detergent is being used. Increase the amount of detergent used or change Detergent .
Selected wash cycle is too light. Select a more intensive wash program.
Tea residue or lipstick marks on dishware.
Dishwashing temperature is too low. Select a program with a higher dishwashing temperature.
Too little detergent is being used or is unsuitable.
Use a suitable Detergent and follow the manufacturer’s instructions for the
amount to be used.
Dishware has been precleaned too intensively. Then the sensors choose a lighter cycle. Stubborn remnants cannot be entirely removed. Only remove large remnants of food and do not pre-rinse dishware.
There are colored coatings (blue, The formation of films is due to substances contained in vegetables (cabbage,
yellow, brown) inside the appliance celery, potatoes, noodles, etc.) or tap water (manganese).
or on stainless steel dishware that are difficult or impossible to remove.
Clean the appliance. You can remove coatings with Mechanical cleaning Page 24 or a machine cleaning product. It may not always be possible to completely remove coatings
but they are harmless to health.
The formation of films is due to metal components on silver or aluminum
dishware. Clean the appliance.
You can remove coatings with Mechanical cleaning Page 24 or a machine cleaning
product. It may not always be possible to completely remove coatings but they
are harmless to health.
Plastic parts inside the appliance are discolored.
Plastic parts inside the appliance may become discolored over the life of the dishwasher. Discoloration may come about and will not impair functioning of the appliance.
Plastic parts are discolored.
Dishwashing temperature is too low. Select a program with a higher dishwashing temperature.
Dishware has been precleaned too intensively. Then the sensors choose a lighter cycle. Stubborn remnants cannot be entirely removed. Only remove large remnants of food and do not pre-rinse dishware.
There are removable streaks on Amount of rinse aid to be dispensed is set too high.
glasses, glassware with a metallic Set the rinse aid system to a lower setting.
appearance and silverware.
“Setting the amount of rinse aid”, Page 14
No rinse aid has been added. Add rinse aid.
“Adding rinse aid”, Page 14
There is detergent residue in the final rinse. Lid of detergent dispenser is
blocked by dishware and will not open fully. 1. Arrange dishware in the upper
rack so the tab collecting tray is not obstructed by
dishware. “Loading dishware”, Page 17
29
en-usTroubleshooting
Issue
There are removable streaks on glasses, glassware with a metallic appearance
and silverware.
Cause and troubleshooting
Items of dishware are blocking the dispenser lid. 2. Do not place dishware or
fragrance dispensers in the tab collecting tray.
Dishware has been precleaned too intensively. Then the sensors choose a
lighter cycle. Stubborn remnants cannot be entirely removed. Only remove large
remnants of food and do not pre-rinse dishware.
Irreversible clouding of glassware. Glasses are not dishwasher-proof, only suitable for dishwashers. Use dishwasher-proof glasses.
Glasses are usually only suitable for cleaning in a dishwasher, i.e. long-term wear or long-term changes must be expected.
Avoid a lengthy steam phase (standing time after wash cycle ends). Use a program with a lower temperature. Use detergent with a glass protection component.
Detergent residue is present in the detergent dispenser or the tab collecting tray.
Spray arms were blocked by dishware so detergent was not rinsed out. Check
that the spray arms are not blocked and can rotate freely.
Detergent dispenser was damp when detergent was added. Only add detergent to
the detergent dispenser when dry.
Excessive formation of foam occurs.
Hand soap got in the rinse aid dispenser. Immediately add rinse aid to the
dispenser.
“Adding rinse aid”, Page 14
Rinse aid has been spilled. Remove the rinse aid with a cloth.
Detergent or machine care product used causes excessive foaming. Change the
brand of detergent.
Connection to home network is not WLAN on router is not active.
established.
Check the wireless network connection of your router.
WLAN display is flashing.
Connection to home network is not available. Activate the wireless network connection on your router.
Home Connect cannot be implemented correctly.
Home Connect set incorrectly. Please consult the documents supplied for Home
Connect®.
There is a technical error. Please consult the information on support in the
documents supplied for
Home Connect®.
Refill indicator for rinse aid lights up.
No rinse aid. 1. Add Rinse aid Page 14.
2. Set the amount of rinse aid to be dispensed. “Setting the amount of rinse
aid”, Page 14
Refill indicator for rinse aid does not light up.
Rinse aid system is switched off. Set the amount of rinse aid.
“Setting the amount of rinse aid”, Page 14
30
Troubleshootingen-us
Issue All LEDs light up or flash.
Cause and troubleshooting
Electronics have detected a fault. 1. Press the main switch button for approx.
4 seconds.
“Controls”, Page 8
The appliance is reset and restarted. 2. If the problem occurs again:
Switch off the appliance. Unplug the power plug or switch off the circuit
breaker in the fuse box. Wait at least 2 minutes. Switch on the circuit
breaker in the fuse box or plug in the power plug. Switch on the appliance. 3.
If the problem occurs again:
Contact customer service. “Customer Service”, Page 33
Water is left in the appliance at the Filter system or area under the filters is blocked.
end of the program.
1. Clean the Filters Page 24.
2. Clean the Drain pump Page 32.
Program has not yet ended. Wait until the program ends or terminate the program with Reset. “Terminating the wash cycle”, Page 19
Appliance cannot be switched on or operated.
Software update is taking place. Wait until the software update has finished.
Appliance functions have failed. 1. Pull out the power cord plug or switch off
the breaker. 2. Wait at least 2 minutes. 3. Connect the appliance to the power
supply. 4. Switch the appliance on.
Appliance does not start.
The breaker has tripped. Check the relevant breaker.
Power cord is not inserted. 1. Check whether the power outlet is working. 2.
Check whether the power cord plug is properly inserted in the power outlet and
on the rear of the appliance.
Wash cycle starts up automatically.
Appliance door is not closed properly. Close the appliance door.
You did not wait until the cycle ended. “Terminating the wash cycle”, Page 19
Appliance stops during the cycle or Appliance door is not closed properly.
cuts out.
Close the appliance door.
Power and/or water supply has been interrupted. 1. Check the power supply. 2. Check the water supply.
Upper rack is pressing against inner door and preventing appliance door from
being closed securely.
Check whether the rear panel of the appliance is being pressed in by a power
outlet or a hose holder that has not been removed.
Arrange the dishware so that no parts project beyond the rack and prevent the
appliance door from closing properly.
Appliance door cannot be closed. Door lock has been activated. Close the appliance door with greater force.
31
en-usTroubleshooting
Issue Appliance door cannot be closed.
Lid on the detergent dispenser cannot be closed. Filling valves making
knocking noises.
Noise level varies
Cause and troubleshooting
Door cannot be closed due to installation method. Check whether the appliance
has been installed properly.
When closed, the appliance door, its decor or attached parts should not knock
against adjacent cabinets or the worktop.
Detergent dispenser or lid are blocked by sticky detergent residue. Remove
detergent residue.
Caused by the domestic installation. No fault present in the appliance. Does
not affect functioning of the appliance. Can only be remedied in the home
installation.
The noise level can vary, depending on what kind of dishes are loaded and
where they are placed. Make sure the dishware is loaded in the most secure
way, resting on the tines
and not hitting each other. “Loading dishware”, Page 17
Spray arm is striking dishes. Arrange dishware so the spray arms do not strike
dishware.
With a small load the water jets directly strike against the tub. Distribute
the dishware evenly. Load the appliance with more dishware.
Light items of dishware move about during the wash cycle. Position light items
of dishware securely.
16.1Clean drain pump
Large food remnants or foreign objects can block the drain pump. As soon as
the dishwashing water no longer drains properly, the drain pump must be
cleaned.
CAUTION There may be some sharp debris, such as glass fragments, blocking the
drain pump. Use caution when removing parts for cleaning.
1. Disconnect the appliance from the power supply. 2. Remove the upper and
lower rack. 3. Remove the filter system. 4. Scoop out any water.
Use a sponge if necessary.
5. Pry the pump cover off using a spoon and grip it by the crosspiece.
6. Lift the pump cover diagonally inward and take it out.
a Now you can reach the impeller with your hand. 7. Remove any food remnants
or foreign objects in the
area of the impeller.
32
8. Insert the pump cover and press down .
2
1
a The pump cover clicks into position. 9. Install the filter system. 10.Insert
the upper and lower rack.
Transportation, storage and disposal
17Transportation, storage and disposal
Transportation, storage and disposal
17.1Removing the appliance
1. Disconnect the appliance from the power supply. 2. Turn off the water
faucet. 3. Detach the drain connection. 4. Detach the water connection. 5.
Loosen any screws fastening the appliance to cabinet
parts. 6. Remove the base panel if fitted. 7. Pull the appliance out
carefully, along with the hose
behind it.
17.2Vacation and Storage
NOTICE: Preparing your unit for vacation Before leaving for vacation during
warmer weather,
besides turning off the main valve, also turn off water supply at the nearest
point to the dishwasher. During colder weather, please follow the instructions
for winterizing your unit below. Winterizing your unit If your dishwasher will
be unused for an extended period of time in a location that experiences
freezing temperatures (vacation home or through a vacation period), have your
dishwasher winterized by an authorized service provider.
Transportation, storage and disposalen-us
17.3Transporting the appliance
To avoid damage to the appliance, empty it before transporting.
Note: Always transport the dishwasher upright to prevent residual water
getting into the machine’s controls and damaging the appliance.
1. Remove dishware from the appliance. 2. Secure loose parts. 3. Turn the
water faucet on. 4. Switch on the appliance. 5. Select the cycle with the
highest temperature. 6. Start the cycle. Page 19 7. To drain the appliance,
terminate the cycle after approx.
4 minutes. “Terminating the wash cycle”, Page 19 8. Switch off the appliance.
9. Turn off the water faucet. 10.To empty the residual water out of the
appliance, detach the supply hose and let the water drain out.
17.4Disposal of your old appliance
Environmentally sound disposal allows valuable raw materials to be recycled.
WARNING Avoid a risk of entrapment upon disposal. Unplug the appliance from
the power outlet. Cut the power cord and remove the door upon
discarding the appliance.
Check your local area for large appliance recycling programs.
Customer Service
18Customer Service
Customer Service
With any warranty repair, we will make sure your appliance is repaired by an
authorized service provider using genuine replacement parts. We use only
genuine replacement parts for all repairs. Detailed information on the
warranty period and terms of warranty can be found in the Statement of Limited
Product Warranty, from your retailer, or on our website. If you contact
Customer Service, you will need the model number (E-Nr.), the production
number (FD) and the consecutive numbering (Z-Nr.) of your appliance. USA:
1-800-944-2904 www.bosch-home.com/us
/owner-support/get-support www.bosch-home.com/us/shop CA:
1-800-944-2904 www.bosch-
home.ca/en/service/get-support www.bosch-home.ca/en/service/cleaners-and-accessories For assistance with
connecting to Home Connect®, you can also view instructions here: www.home-
connect.com/us/en/help-support/set-up
33
en-usCustomer Service
18.1Model number (E-Nr.), production number (FD) and consecutive numbering
(Z-Nr.)
You can find the model number (E-Nr.), the production number (FD) and the
consecutive numbering (Z-Nr.) on the appliance’s rating plate. The rating
plate is located inside the appliance door. Making a note of your appliance’s
details and the Customer Service telephone number will enable you to find them
again quickly.
34
Technical specificationsen-us
Technical specifications
19Technical specifications
Technical specifications
Weight Voltage Power rating Fuse Water pressure
Inlet rate Water temperature
Load capacity
Max.: 60 kg/132 lbs 120 V, 60 Hz 1440 W 12 A ¡ Min. 7.25 psi (50 kPa) ¡ Max. 145 psi (1000 kPa) Min. 2.6 gal/min Cold water. Hot water max.: 140 °F/ (60 °C) 16 place settings
19.1Information regarding Free and Open Source Software
This product includes software components that are licensed by the copyright
holders as free or open source software. The applicable license information is
stored on your home appliance. You can also access the applicable license
information via your Home Connect® app: “Profile -> Legal information ->
License Information”.1 You can download the license information on the brand
product website. (Please search on the product website for your appliance
model and additional documents). Alternatively, you can request the relevant
information from ossrequest@bshg.com or BSH Hausgeräte GmbH, CarlWery-Str. 34,
81739 Munich, Germany. The source code will be made available to you on
request. Please send your request to ossrequest@bshg.com or BSH Hausgeräte
GmbH, Carl-Wery-Str.34, 81739 Munich, Germany. Subject: ,,OSSREQUEST” The cost
of performing your request will be charged to you. This offer is valid for
three years from the date of purchase or at least as long as we offer support
and spare parts for the relevant appliance.
STATEMENT OF LIMITED PRODUCT WARRANTY
20STATEMENT OF LIMITED PRODUCT WARRANTY
STATEMENT OF LIMITED PRODUCT WARRANTY
20.1What this warranty covers & Who it applies to
The limited warranty provided by BSH Home Appliances (“Bosch”) in this
Statement of Limited Product Warranty applies only to the Bosch appliance sold
to you (“Product”), provided that the Product was purchased: ¡ For your
normal, household (non-commercial) use, and
has in fact at all times only been used for normal household purposes.
¡ New at retail from a BSH authorized dealer or directly from BSH (not a
display, “as is”, or previously returned model), and not for resale, or
commercial use.
¡ Within the United States or Canada, and has at all times remained within the
country of original purchase.
The warranties stated herein apply to the original purchaser of the product
warranted herein and to each succeeding owner of the product purchased for
ordinary home use during the term of the warranty. Please make sure to
register your Product; while not necessary to effectuate warranty coverage, it
is the best way for Bosch to notify you in the unlikely event of a safety
notice or product recall.
20.2How long the warranty lasts
Bosch warrants that the Product is free from defects in materials and
workmanship for a period of three hundred and sixty-five (365) days from the
date of the original delivery. The foregoing timeline begins to run upon the
date of the original delivery, and shall not be stalled, tolled, extended, or
suspended, for any reason whatsoever. This Product is also warranted to be
free from cosmetic defects in material and workmanship (such as scratches of
stainless steel, paint/porcelain blemishes, chips, dents, or other damage to
the finish) of the Product, for a period of thirty (30) days from the date of
delivery or closing date for new construction. This cosmetic warranty excludes
slight color variations due to inherent differences in painted and porcelain
parts, as well as differences caused by kitchen lighting, product location, or
other similar factors. This cosmetic warranty specifically excludes any
display, floor, “As Is”, or “B” stock appliances.
20.3Extended Warranty
BSH also provides these additional limited warranties: ¡ 5 year limited
warranty on electronics: BSH will repair or
replace any BSH microprocessor or printed circuit board if it proves to be
defective in materials or workmanship (excludes labor charges).
1 Depending on the appliance specifications 35
en-usSTATEMENT OF LIMITED PRODUCT WARRANTY
¡ 5 year limited warranty on dish racks: BSH will replace the upper or lower
dish rack (excluding rack components), if the rack proves defective in
materials or workmanship (excludes labor charges).
¡ Lifetime warranty against stainless steel rust through: BSH will repair or
replace your dishwasher with the same model or a current model that is
substantially equivalent or better in functionality, if the inner liner should
rust through (excludes labor charges).
¡ BSH will repair or replace the stainless steel door if the door should rust
through (excludes labor charges).
20.4Repair/replace as your exclusive remedy
During this warranty period, Bosch or one of its authorized service providers
will repair your Product without charge to you (subject to certain limitations
stated herein) if your Product proves to have been manufactured with a defect
in materials or workmanship. If reasonable attempts to repair the Product have
been made without success, then Bosch will replace your Product (upgraded
models may be available to you, in Bosch’s sole discretion, for an additional
charge). Nothing in this warranty requires damaged or defective parts to be
replaced with parts of a different type or design than the original part. All
removed parts and components shall become the property of Bosch at its sole
option. All replaced and/or repaired parts shall assume the identity of the
original part for purposes of this warranty and this warranty shall not be
extended with respect to such parts. Bosch’s sole liability and responsibility
hereunder is to repair manufacturerdefective Product only, using a Bosch
authorized service provider during normal business hours. For safety and
property damage concerns, Bosch highly recommends that you do not attempt to
repair the Product yourself, or use a non-authorized service provider; Bosch
will have no responsibility or liability for damage resulting from repairs or
work performed by a non-authorized service provider. Authorized service
providers are those persons or companies that have been specially trained on
Bosch products, and who possess, in Bosch’s opinion, a superior reputation for
customer service and technical ability (note that they are independent
entities and are not agents, partners, affiliates or representatives of
Bosch). Nevertheless, taking your product to be serviced by a repair shop that
is not affiliated with or an authorized dealer of Bosch will not void this
warranty. Also, using third-party parts will not void this warranty.
Notwithstanding the foregoing, Bosch will not incur any liability, or have
responsibility, for the Product if it is located in a remote area (more than
100 miles from an authorized service provider) or is reasonably inaccessible,
hazardous, threatening, or treacherous locale, surroundings, or environment;
in any such event, if you request, Bosch would still pay for labor and parts
and ship the parts to the nearest authorized service provider, but you would
still be fully liable and responsible for any travel time or other special
charges by the service company, assuming they agree to make the service call.
Further, to
36
the extent you have installed the Product in a difficult-toaccess location or
have otherwise installed temporary or permanent fixtures that create barriers
to accessing or removing the Product, Bosch will not incur any liability for,
or have responsibility, for work or costs associated with moving the Product
or otherwise creating access to the Product in order to repair or replace it.
All such costs shall be your sole responsibility.
20.5Out of warranty product
Bosch is under no obligation, at law or otherwise, to provide you with any
concessions, including repairs, prorates, or Product replacement, once this
warranty has expired.
20.6Warranty exclusions
The warranty coverage described herein excludes all defects or damage that are
not the direct fault of Bosch, including without limitation, one or more of
the following: ¡ Use of the Product in anything other than its normal,
customary and intended manner (including without limitation, any form of
commercial use, use or storage of an indoor product outdoors, use of the
Product in conjunction with air or water-going vessels). ¡ Any party’s willful
misconduct, negligence, misuse, abuse, accidents, neglect, improper operation,
failure to maintain, improper or negligent installation, tampering, failure to
follow operating instructions, mishandling, unauthorized service (including
selfperformed “fixing” or exploration of the appliance’s internal workings). ¡
Adjustment, alteration or modification of any kind. ¡ A failure to comply with
any applicable state, local, city, or county electrical, plumbing and/or
building codes, regulations, or laws, including failure to install the product
in strict conformity with local fire and building codes and regulations. ¡
Ordinary wear and tear, spills of food, liquid, grease accumulations, or other
substances that accumulate on, in, or around the Product. ¡ Any external,
elemental and/or environmental forces and factors, including without
limitation, rain, wind, sand, floods, fires, mud slides, freezing
temperatures, excessive moisture or extended exposure to humidity, lightning,
power surges, structural failures surrounding the appliance, and acts of God.
¡ Service calls to correct the installation of your Product, to instruct you
how to use your Product, to replace house fuses or correct house wiring or
plumbing. ¡ Removal and replacement of trim or decorative panels that
interfere with servicing the Product. ¡ Damage or defects caused by labor or
parts installed by any non-authorized service provider, unless approved by
Bosch before service is performed.
In no event shall Bosch have any liability or responsibility whatsoever for
damage to surrounding property, including cabinetry, floors, ceilings, and
other structures or objects around the Product. Also excluded from this
warranty are Products, on which the serial numbers have been altered,
defaced, or removed; service visits to teach you how to use the Product, or
visits where there is nothing wrong with the Product; correction of
installation problems (you are solely responsible for any structure and
setting for the Product, including all electrical, plumbing or other
connecting facilities, for proper foundation/flooring, and for any alterations
including without limitation cabinetry, walls, floors, shelving, etc.); and
resetting of breakers or fuses TO THE EXTENT ALLOWED BY LAW, THIS WARRANTY
SETS OUT YOUR EXCLUSIVE REMEDIES WITH RESPECT TO PRODUCT, WHETHER THE CLAIM
ARISES IN CONTRACT OR TORT (INCLUDING STRICT LIABILITY, OR NEGLIGENCE) OR
OTHERWISE. THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, WHETHER EXPRESS
OR IMPLIED. ANY WARRANTY IMPLIED BY LAW, WHETHER FOR MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE, OR OTHERWISE, SHALL BE EFFECTIVE ONLY FOR
THE PERIOD THAT THIS EXPRESS LIMITED WARRANTY IS EFFECTIVE. IN NO EVENT WILL
THE MANUFACTURER BE LIABLE FOR CONSEQUENTIAL, SPECIAL, INCIDENTAL, INDIRECT,
“BUSINESS LOSS”, AND/OR PUNITIVE DAMAGES, LOSSES, OR EXPENSES, INCLUDING
WITHOUT LIMITATION TIME AWAY FROM WORK, HOTELS AND/OR RESTAURANT MEALS,
REMODELLING EXPENSES IN EXCESS OF DIRECT DAMAGES WHICH ARE DEFINITIVELY CAUSED
EXCLUSIVELY BY BOSCH, OR OTHERWISE. SOME STATES DO NOT ALLOW THE EXCLUSION OR
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, AND SOME STATES DO NOT
ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE
EXCLUSIONS OR LIMITATIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU
SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM
STATE TO STATE. No attempt to alter, modify or amend this warranty shall be
effective unless authorized in writing by an officer of BSH.
20.7Obtaining warranty service
To obtain warranty service for your product, you should contact Bosch Customer
Support at 1-800-944-2904 to schedule a
repair.
20.8Product information
For handy reference, copy the information below from the rating plate. Keep
your invoice and/or delivery documents for warranty validation.
Model number (E-Nr.)
Production number (FD)
Date of delivery
STATEMENT OF LIMITED PRODUCT WARRANTYen-us
37
Register your appliance to enjoy customized benefits.
Thank you for being a Bosch customer! Simply create a MyBosch account, then
register your appliance. You’ll find a variety of customized information in
MyBosch such as:
· Discounts for filters, cleaners, accessories & parts · Easy access to
manuals & appliance specifications · Easy access to part lists · Customized
offer for the Bosch Appliance Service Plan (sent by mail after appliance
registration)
Register here: www.bosch-home.com/us/owner-support/mybosch
Looking for help? You’ll find it here.
No matter what, no matter when: Bosch is here to support you. We’re here to
assist with usage instructions, cleaning tips, accessories & parts,
troubleshooting, and repairs. Find online resources such as FAQs, how-to-
videos, manuals, warranties and authorized Bosch servicers at: www.bosch-
home.com/us/owner-support/get-support
Contact us:
Please have your Model Number (E-Nr) ready when contacting us.
1-800-944-2904 www.bosch-home.com/us
/owner-support/contact-us
BSH Home Appliances Corporation 1901 Main Street, Suite 600 Irvine, CA 92614
USA www.bosch-home.com
1-800-944-2904 © 2023 BSH Home
Appliances Corporation
9001645405
9001645405 (030821) 650 E5 en-us
References
- Connect.com
- here.no
- Home Appliances Global Website | Bosch
- Welcome to MyBosch
- Connect your household | Home Connect
- Help & Support | Home Connect
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>