The Home Depot 24 X 84 Inch Barn Door Slab Installation Guide
- June 1, 2024
- THE HOME DEPOT
Table of Contents
The Home Depot 24 X 84 Inch Barn Door Slab
ASSEMBLY INSTRUCTIONS
Step-by-Step Guide
- Identify Components. Find the corresponding parts in the below picture after opening the package, starting the assembly after sort all parts out.
- Initial Assembly: Find A1, insert B1, B2, B3 into the corresponding grooves of A1 as shown in the diagram, and then place the C board into the grooves on both sides of the B board according to the diagram and slide it to the left.
- Add A2 Panel: After installing the C board, continue to install A2, paying attention to align the tongues of the board.
- Finalize Assembly: After completing the above steps, put the screw F into the screw holes on the sides of A1 and A2, tighten it with a screwdriver, and then place the D board as shown in the diagram and fix it with screw G to complete the installation.
Diagrams Description
The provided diagrams illustrate the assembly process of a flat-pack furniture item, featuring horizontal and vertical panels with designated slots for assembly. Each step shows the orientation and placement of each panel and where to insert screws to secure the structure.
Specifications
| Component | Description |
|---|---|
| F, G | Screws for assembly |
| B1, B2, B3 | Horizontal panels |
| A1, A2, A3 | Vertical panels with grooves |
| C | Intermediate horizontal panels |
| D | Vertical back panel |
FAQ
- What tools are needed for assembly?
- A screwdriver is required to tighten the screws F and G during the final assembly steps.
- How do I align the panels correctly?
- Pay attention to the direction of the tongues on the boards and the grooves they fit into for proper alignment.
- Can I assemble the product alone?
- While the instructions are designed for individual assembly, having an extra pair of hands may be helpful for aligning and securing the panels.
Read User Manual Online (PDF format)
Loading......