KARCHER MFL 2-18 Rechargeable Multifunctional Lamp Instruction Manual

May 15, 2024
Karcher

KARCHER MFL 2-18 Rechargeable Multifunctional Lam

KARCHER-MFL-2-18-Rechargeable-Multifunctional-Lamp-
PRODUCT

Safety instructions
Read these original instructions and safety instructions as well as the original instructions and safety instructions supplied with the battery pack and charger before using the device for the first time. Act by them. Keep all operating instructions for future reference or future owners. In addition to the notes in the operating instructions, you also need to take into consideration the general safety regulations and accident prevention guidelines that are applicable by law.

DANGER
Indication of an imminent threat of danger that will lead to severe injuries or even death.

WARNING
Indication of a potentially dangerous situation that may lead to severe injuries or even death.

CAUTION
Indication of a potentially dangerous situation that may lead to minor injuries.

ATTENTION
Indication of a potentially dangerous situation that may lead to damage to property.

Safety instructions for battery lamps

  • The light source contained in this lamp may only be replaced by the manufacturer or its Customer Service or a similarly qualified person
  • Handle the battery lamp with care.
  • The battery lamp generates great heat, resulting in a heightened risk of fire and explosion.
  • Do not work with the battery lamp in an explosive environment.
  • Do not point the light beam at people or animals and do not look into the light beam yourself.
  • Do not use the battery lamp in road traffic. The battery lamp is not approved for use in road traffic.
  • Do not cover the battery lamp while it is in operation. The battery lamp heats up and can cause burns due to accumulated heat.
  • Do not let children use the battery lamp. Children can unintentionally dazzle themselves or others.

Intended use

  • The battery lamp is intended for temporary, mobile, ambient illumination in indoor areas and is not suitable for general room lighting.
  • The battery lamp can be used to charge external devices via the USB interfaces.

WARNING
Risk of electric shock. Protect the device from rain and moisture.

ATTENTION

  • The device can be damaged by contact with dampness and humidity.
  • Do not use the battery lamp in damp places.
  • Do not expose the battery lamp to rain or snow.
  • Do not wash the battery lamp with water.
  • Rechargeable battery packs and chargers
  • Only use the device with battery packs and chargers from the KÄRCHER 18 V Battery Power (+) system.

Suitable battery packs and chargers are marked with the KÄRCHER 18 V Battery Power (+) System symbol. Suitable battery packs bear the designation “Battery Power 18/… and Battery Power+ 18/…”. Suitable chargers bear the designation “BC 18 V …”

Environmental protection
The packing materials can be recycled. Please dispose of packaging according to the environmental regulations. Electrical and electronic devices contain valuable, recyclable materials and often components such as batteries, rechargeable batteries or oil, which – if handled or disposed of incorrectly – can pose a potential danger to human health and the environment. However, these components are required for the correct operation of the device. Devices marked by this symbol are not allowed to be disposed of together with household rubbish.

Notes on the content materials (REACH) Current information on content materials can be found at: www.kaercher.de/REACH Accessories and spare parts Only use original accessories and original spare parts. They ensure that the appliance will run fault-free and safely. Information on accessories and spare parts can be found at www.kaercher.com.

Scope of delivery
The scope of delivery for the appliance is shown on the packaging. Check the contents for completeness when unpacking. If any accessories are missing or in the event of any shipping damage, please notify your dealer.

Safety devices
Safety devices protect the user and may not be taken out of operation or functionally circumvented. Adhere to the safety instructions in the chapters!

Symbols on the device

Description of the device

See the graphics page for illustrations Illustration A

  1. Device (MFL means multifunction lamp)
  2. Carrying handle
  3. ON/OFF switch
  4. Lamp
  5. USB-C interface, 2.0 A
  6. USB interface cover
  7. USB-A interface, 0.5 A
  8. USB interface activation switch
  9. Battery pack mount
  10. Rechargeable battery pack optional

Rechargeable battery pack
The device can be operated with an 18V Kärcher Battery Power battery pack.

Installation

Battery pack charging

Charge the battery pack (see operating instructions and safety instructions for the battery pack and the charger).

Inserting the battery pack
Push the battery pack into the battery mount on the device until the battery pack latches into place.

Illustration B
KARCHER-MFL-2-18-Rechargeable-Multifunctional-Lamp-FIG-
\(2\)
Operation
Switching on the device
Press the on/off switch.

Illustration C
The battery lamp lights up.

Setting the brightness level
Set the brightness level by pressing the ON-OFF switch.

Illustration C

  • Press once: Lamp lights up at the highest level (280 lm).
  • Press twice: Lamp lights up at the lowest level (80 lm).
  • Press three times: The lamp goes out.

Charging external devices

  1. Pull out the USB interface cover. Illustration D
  2. Plug the USB charging cable (not included in the scope of delivery) into the corresponding USB interface.
  3. Press the USB interface activation switch.

Illustration E
The external devices start charging.

Note
To avoid unnecessary battery discharge, the USB interfaces switch off automatically after no power has been drawn from them for more than 30 seconds. To reactivate them, the activation switch must be pressed. The maximum charging current may be lower for some devices, depending on the USB device. Depending on the USB device or USB cable, it may not be possible to charge the USB device. Due to electromagnetic compatibility, it is recommended to use a USB charging cable of less than 0.5 metres in length.

Setting the angle

  1. Fold out the battery lamp.
  2. Fold out the battery lamp to the desired position (max. 180°) and turn it to the desired angle (max. 315°).

Illustration F
Note
The hinge can be turned between 0° and 315°. Do not turn beyond the stop.

Finishing operation

Switching off the device
Press the ON/OFF switch several times if necessary, depending on the current brightness level.

Illustration C
The battery lamp goes out.

Removing the battery pack
Note
During longer work breaks, remove the battery pack from the device and secure it against unauthorised use.

  1. Switch off the battery lamp.
  2. Pull the battery pack out of the battery pack mount.

Illustration G
Transport

  1. Switch off the battery lamp
  2. Remove the battery pack from the device, see chapter Removing the battery pack.

WARNING
Switch the device off, allow it to cool down and remove the battery pack before storage or transportation.

Storage

  1. Switch off the battery lamp

  2. Remove the battery pack from the device, see chapter Removing the battery pack.

  3. Turn the battery lamp so that the LED points towards the device.
    Illustration H

  4. Fit the USB interface cover on the USB interfaces.

ATTENTION
Risk of damage due to incorrect storage! Incorrect storage can damage the device. Store the device in a dry and well-ventilated interior space. Do not expose the device to direct sunlight for a long time. Keep the device away from corrosive substances such as garden chemicals and deicing salts.

ATTENTION
Risk of damage due to incorrect storage! Incorrect storage can damage the device. Store the device a dark, dry and frost-free place, out of the reach of children.

WARNING
Switch the device off, allow it to cool down and remove the battery pack before storage or transportation. Care and service

DANGER
The danger of electric shock Injuries due to touching live parts Switch off the device. Remove the battery pack.

Cleaning the device

ATTENTION
Incorrect cleaning Damage to the device Clean the device with a damp cloth. Do not use solvent-based cleaning agents. Do not immerse the device in water. Do not clean the device with a hose or high-pressure water jet.

  1. Allow the device to cool down.
  2. Clean the device with a soft brush or a clean cloth, moistened if necessary

Troubleshooting guide

Malfunctions often have simple causes that you can remedy yourself using the following overview. When in doubt, or in the case of malfunctions not mentioned here, please contact your authorised Customer Service. As the battery pack ages, even if it is looked after, its capacity reduces such that the full run time will no longer be reached when fully charged. This does not indicate a defect.

KARCHER-MFL-2-18-Rechargeable-Multifunctional-Lamp-FIG-
\(5\)

Warranty
The warranty conditions issued by our sales company apply in all countries. We shall remedy possible malfunctions on your device within the warranty period free of cost, provided that a material or manufacturing defect is the cause. In a warranty case, please contact your dealer (with the purchase receipt) or the next authorised customer service site. (See overleaf for the address)

Technical data

KARCHER-MFL-2-18-Rechargeable-Multifunctional-Lamp-FIG-
\(6\)

Subject to technical modifications. Register your product and benefit from many advantages.
www.kaercher.com/dealersearch
Alfred Kärcher SE & Co. KG
Alfred-Kärcher-Str. 28-40
71364 Winnenden (Germany)

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals