home 2J3-1 DPV Smart Video Headset Instruction Manual

home 2J3-1 DPV Smart Video Headset

Product Information

Specifications:

• Night-vision light
• Camera
• RFID reader
• Speaker
• Call button
• Microphone
• Touch screen
• Card slot
• Mounting bracket
• Connectors
• DC power

Product Usage Instructions

Installation and Setup:
Before installation, carefully read the instruction manual. Ensure all components are included in the package. Mount the device securely using the provided mounting bracket. Connect the necessary wires following the wiring diagram.

Device Operation:
To turn on the device, connect the DC power source. The touchscreen interface allows you to navigate through different settings and functionalities. Use the call button to initiate communication with visitors. The camera and microphone enable video and audio communication.

Accessing Menu Options:
The device menu includes options for settings, time, date, weather updates, WiFi signal status, screen display settings, and playback functionalities. You can adjust settings such as volume, display brightness, and language preferences through the touchscreen interface.

Lock Control:
The device supports opening locks using RFID proximity keys. Ensure the lock operates within the specified voltage range for safe usage. If the lock requires more than 200mA, use an external power supply unit as recommended.

Safety Precautions:
Do not attempt to disassemble or modify the device. In case of any damage, immediately power off the unit and seek professional assistance. Basic English proficiency may be necessary for initial setup and configuration of the device.

Frequently Asked Questions (FAQ):

• Q: Can I use the device without connecting it to a power source?
  A: No, the device requires a DC power source for operation. Ensure proper power supply connections for functionality.

• Q: How do I change the language settings on the device?
  A: Navigate to the settings menu on the touch screen interface to access language options. Select your preferred language from the available choices.

• Q: What should I do if the camera or microphone is not functioning properly?
  A: Check the connections and ensure they are securely plugged in. If issues persist, contact customer support for further assistance.

IMPORTANT SAFETY INSTRUCTIONS

READ THE INSTRUCTION MANUAL CAREFULLY BEFORE USE AND RETAIN IT FOR LATER REFERENCE!

WARNINGS

• Before use of the product, please read this instructions manual and keep it for future reference.
• The original document was prepared in Hungarian language.
• This appliance can be used by children aged 8 years or above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge, provided that they are supervised or have been given instructions concerning the use of the appliance and understand the hazards involved.
• Children may not play with the appliance.
• Children may perform the cleaning or user maintenance of the appliance subject to supervision.
• After removal of the packaging, inspect the product for possible damage during shipment.
• Keep the packaging away from children if it contains plastic bags or other potentially hazardous items.
• Please read this manual carefully before use of the product, and keep it in a safe place for future reference.
• Only for use under dry, indoor conditions.
• If the network adapter is damaged, or any malfunction occurs, immediately unplug the unit from the wall socket and consult a qualified technician.
• If not used for a longer period, disconnect the network.
• Lead the connecting cable between units away from other network cables.
• Use of a too small cross-section or too long cable can reduce audio and image quality.
• Do not operate the device near strong electromagnetic fields or other appliances.
• Protect the device from dust, humidity, liquids, moisture, frost and shocks, as well as from direct heat and sunlight.
• Do not dismantle, modify the device, as it may cause fire, accidents or electric shock.
• Make sure that the connections are in accordance with the instructions! Incorrect connections can result fire or other defaults. Consult a specialist if necessary.
• When leading the connecting cables, ensure that their insulation does not get damaged by any sharp metal objects nearby!
• While installing never cut through cables or damage their insulation. This could cause a short circuit or fire!
• Avoid connecting or disconnecting cables during use.
• With consideration to the presence of supply voltage, observe the general rules of contact protection.
• Never touch the adapter, the device or the connecting cables with wet hands.
• This device is not designed for commercial purposes, only for household use.
• IP65: Totally protected against dust.
• Protected against low pressure jets of water from all directions, limited ingress permitted.
• Warranty claims cannot be validated in case of defects caused by incorrect connection of the device.
• All trademarks and trade names form the property of their respective owners.
• Third party services are not guaranteed.
• Somogyi Elektronic Kft. certifies that the radio equipment complies with Directive 2014/53/EU.
• The full text of the EU Declaration of Conformity is available at: somogyi@somogyi.hu.
• Due to continuous improvements, technical data, design and operation are subject to change without notice.
• The most recent instructions manual is available for download from the www.somogyi.hu website.

Caution: Risk of electric shock! Do not attempt to disassemble of modify the unit or its accessories. In case any part is damaged, immediately power off the unit and seek the assistance of a specialist.

DISPOSAL
Waste equipment must be collected and disposed separately from household waste because it may contain components hazardous to the environment or health. Used or waste equipment may be dropped off free of charge at the point of sale, or at any distributor which sells equipment of identical nature and function. Dispose of product at a facility specializing in the collection of electronic waste. By doing so, you will protect the environment as well as the health of others and yourself. If you have any questions, contact the local waste management organization. We shall undertake the tasks imposed upon the manufacturer pursuant to the relevant regulations and shall bear all associated costs arising from such.

OVERVIEW

FEATURES

CAN BE EXTENDED INTO A VERSATILY SECURITY SYSTEM

• video door phone + silent alarm + surveillance camera mode + panic alarm
• 7” (17.7cm) extra flat touch screen monitor
• robust, aluminium outdoor camera unit (IP65)
• better image quality, improved AHD camera
• indication of visitors with motion detection camera mode
• extension options: outdoor unit with 2 cameras, 4 monitors, 2 CCTV monitors, 2 door opening or motion detection sensors (optional)
• lock and door opening in case of electric lock (optional)
• RFID proximity keys for convenient and fast door opening
• InterCom: home phone function with multiple indoor units installed
• message sending upon motion detection
• automatic and manual photo/video recording
• door view at any time, even from a remote location
• sensitive camera with night mode
• practical doorbell profiles: at home, leave home, sleep
• selectable ringing tones
• adjustable microphone, speaker and image properties
• user-friendly menu: EN, HU, SK, RO, D, SRB
• remote access via Internet with a smart phone (Smart Life, Tuya Smart)
• the Tuya platform is compatible with Android and iOS smart phones
• remote access privileges can be shared among family members
• storage can be extended with a microSD card (128GB, Class10+, not included)
• 4-core wired connection between units
• accessories: 7 RFID proximity key (DPV 270RFID), wall mounting brackets, ~10m connecting cable, connections for extension, network adapter, fittings

INTRODUCTION – SMART DEVICE

The product is compatible with smart phones. Accordingly, at the time of writing of this description, it is assumed that the user has the general knowledge necessary for the handling of smart phones. The settings and use of the device is similar to that of hones and tablets. Some phone settings may require more in-depth knowledge and English language skills. The first part of this guide describes how to use the appliance independently without connecting the phone. The device can be entirely utilized without the use of a smart phone as well.

APPLICATION
This device is ideal as a replacement of conventional audio door phone systems or door bells. The device can be extended by connecting a second outdoor unit with a camera and two additional indoor units (not included). Furthermore, two arbitrary surveillance cameras (CCTV monitors) and two outdoor door opening or motion detectors can also be connected (not included). For the installation of these extensions you will need to contract a qualified technician and purchase accessories. A photograph can be taken of visitors either automatically or manually. The storage capacity for images can be extended by inserting a microSD card (not included) into the device. To record videos the microSD card is required as a prerequisite. In addition to the electric lock, a gate opening system can also be operated from the monitor, as necessary. This way doors and entrance gates can be opened even from a remote location for both people and vehicles.

Adequate audio- and image quality depends on the distance between each device and the cross-section of the cable used for connection. For the following connection distances we recommend using the indicated cable cross-section as a minimum requirement: 0-10m: 4×0.3mm2 / 10-30m: 4×0.5mm2 / 30-50m: 4×0.75mm2

In case a longer connecting cable is necessary, than the 10 meter long one included with the device, the suitable, 4-core cable shall be purchased separately by the customer. Ensure connection of the cable as instructed in case of both units. The order of coloured wires in the the outdoor unit terminals – from left to right – must be equivalent with that of the indoor unit! It should be checked in any case, but in general the following colours are used: green: AUDIO / black: (-) GND / yellow: VIDEO / red: +12V VCC
Terminals 5 and 6 of the outdoor device can be connected to an electric lock. A two-core wire should be used for this in the required length: 2×1.0mm2 (not included). If you have an electric lock installed, family members arriving home can conveniently open the lock using the supplied blue, contact-free proximity keys (RFID). A lock with a nominal supply voltage requirement of 12V/200mA (1Amax.) can be operate with the device. Above 200mA an external power supply unit must be used.
Hire a qualified technician for the commissioning of the door phone system! The device menu is available in a number of languages. Depending on the user, basic English proficiency may be required for commissioning.

Options For Extension

Wiring Diagram

COMMISSIONING

Outdoor unit
Ensure protection from weather conditions. Mount the outdoor unit in a location protected from precipitation and direct sunlight. Direct sunlight irradiating the unit can deteriorate image quality. Use a custom cover, if necessary. The outdoor unit is supplied from the monitor. Connect the unit using the spring connectors as shown on the wiring diagram. Microphone sensitivity (left side screw) and speaker volume (right side screw) can be adjusted on the rear side of the unit – using a screwdriver. After mounting the plastic frame of the outdoor unit, insert the locking tab located on the top rear part of the unit into the slot on the top of the mounting frame, then fasten the outdoor unit to the frame at the bottom with a short screw (included). Remove the protective foil from the lens, if present. In case of operation of an electric lock, it has to connected to the outdoor unit. If no gate opening circuit is used, then the output of the electric lock should not exceed the 12VDC/1A parameter values. For the operation of an electric lock with a larger poweroutput, an external transformer and relay needs to be used, however this is recommended in any case.

OUTDOOR UNIT

CMOS| 1/2.7’, 2MP
wide angle camera| ~120°
colour| auto nightvision
built in night illumination| infrared LED
min. illuminance (F1.2)| 0.1 Lux (color)
min. illuminance (F1.2)| 0.01 Lux (black&white)
FullHD video resolution| 1920×1080, 1080P AHD
detection| motion detection
extension, option| 1+1 outdoor unit
settings| mic and speaker volume
RFID card| 125kHz / ~10…30mm
4-wire cable lenght option| 50 m / 4×075 mm2 max.
E-lock control| 12VDC/0,2A (1Amax.)
powered by| monitor cable / 12 V
metal camera body| IP65
operating temperature| -15…+45 °C<80%RH
dimensions| 68x159x32 mm

Indoor unit
Depending on the distance between the two units, a qualified technician may either lengthen the connecting cable included with the device, or replace it with a cable of the required length, in accordance with the instructions provided in the “APPLICATION” section. The connecting cable should be purchased separately, as required. The cable has to be installed so that it cannot be damaged by weather or physical impacts. Before connecting the power supply adapter, verify the correct connection of the unit. Mount the included metal frame on the wall, then hang the unit on the frame and push it all the way into the frame. Before doing so, connect the network adapter to the rightmost socket of the top row. The outdoor unit should be then connected to the first socket from the left in the top row (CAM1/DOOR1). Ensure that the sequence order of coloured wires are equivalent for both the outdoor and indoor unit. The indoor unit is supplied with a lock opening and gate opening function. In case of purchasing an additional set, the system can be extended with another outdoor unit (up to 2 units) and a second monitor as well (up to 4 monitors are supported). Do not place the device in a location where it is exposed to direct sunlight, high temperatures, humidity. Avoid placing the device nearby other electrical appliances, which can cause interference during operation; such as television set, router, microwave oven, computer.

INDOOR UNIT

monitor| 7” capacitive touch screen
resolution| 1024 x 600P
operation system| Linux
wired connection| outdoor/indoor: 4-wires
WiFi module| 2.401-2.483GHz ERP≤ 1mW
wireless connection| 2.4G IEEE802.11b/g/n
smart application| Smart Life / Tuya Smart
notification to mobile| calls, motion detection
remote unlocking| via mobile app
settings| brightness, contrast, colour, volume
internal storage| 30-50 images (JPG, AVI)
external mSD storage, option| max.128GB, Class10+
leaving message| yes, in leave home mode
cycle monitoring and record| for each camera
extension, option| 1+3 monitors
external CCTV support| 2 cameras optional
external security sensor| 2 door/PIR sensors optional
consumption| 2.5W / 7 W
operating temperature| -0…+40 °C / <80%RH
dimensions| 180x125x28 mm

ALARM AND SURVEILLENCE SYSTEM CAPABILITY

This device can be applied as a central unit of a comprehensive domestic alarm and surveillance (CCTV) system. In addition to up to 2 outdoor units equipped with a camera, further two surveillance cameras (CCTV monitors) can be connected to the indoor unit, along with two door opening or motion detection switches. The image of any intruder will be displayed on the monitor, while a photograph is taken and a video is also recorded onto the microSD card (if) inserted into the indoor unit. A notification will be sent about the event to the linked phone. Consult a qualified technician about this solution with consideration to the given conditions at the installation site. The necessary additional accessories can be purchased separately from a specialized store, according to the wiring diagram shown above.

ACCEPTING A VISITOR
When the door bell button is pressed on the outdoor unit, both the outdoor and indoor units emit a repetitive sound signal (for up to 20sec long, depending on the given setting), and when the call is answered, the monitor turns on (30sec). The monitor will display the image of the visitor at the door. In case of multiple indoor units, the image of the visitor will be displayed on all indoor units, and the visitor can be given access to enter from either unit.

• To talk to the visitor, press the large green phone button on the unit. The sound signal will stop, and you may start talking to the person. The door view screens will become inactive on other indoor units.
• In case an electric lock is connected, the visitor can be allowed entry by pressing the lock opening button. Tap the door icon to activate the lock opening device. No sound signal is emitted. During the opening of the lock, the colour of the LED ring around the outdoor unit changes. The lock can only be opened from inside, if a connection has been established between the units – this prevents accidental opening of the lock. In case a gate opening system is connected, to open the gate, use the gate opening button. Tap the gate icon to activate lock opening contact (NO-COM-NC) on both primary and secondary devices. No sound signal is emitted.
• Finally, end the call by tapping the red phone icon.
• In case of two outdoor units, if the door bell button is pushed on both units (almost) at the same time, then the unit, where the button was pushed first will be prioritized. During the call the monitor will not indicate if a signal is received from the other outdoor unit – only when the call initiated from the first unit is ended.
• The monitor turns off automatically after approx. 1 minute. This is how long a call can be maintained. Communication can be continued with the visitor, if necessary, by initiating door view mode.
• If the call is not accepted, the monitor will turn off automatically after approx. 1 minute.
• In ACCEPT mode a photograph can be taken manually by pressing the camera button in the bottom right corner of the screen, or video can be recorded by pressing the “R” icon. A photograph is taken, or the recording of an up to 25 sec long video is started at the moment when a ring tone emitted, depending on the settings under the SETTINGS (gearwheel icon) / Recording menu item. Upon accepting an incoming call, the recording will continue until the call is ended.
• In case of two indoor units, an ongoing call cannot be diverted between the two units.

DOOR VIEW

In order take a look of the area around the entrance door (approx. 30 sec), press the button in standby mode. Two outdoor units with a camera and further 2 cameras can be connected to the indoor unit, with the indoor unit displaying the images of up to 4 cameras one after the other, by tapping the camera icons in the bottom left corner of the screen.

• To initiate a call with a person standing nearby the outdoor unit, press the large green phone button.
• In case an electric lock is connected, the visitor can be allowed entry by pressing the lock opening button. Tap the door icon with a simultaneous sound signal to activate the lock opening device. In case a gate opening system is connected, to open the gate, use the gate opening button. Tap the gate icon to activate the lock opening device with a simultaneous sound signal.
• Finally, end the call by tapping the red phone icon.
• To end the function, either tap the arrow icon in the top left corner of the screen, or wait approx.60 sec for the monitor to turn off.
• In case of multiple indoor units, door view mode of the outdoor cameras can be initiated on any unit. The function can only be activated on one monitor at a time. The icon of the function turns inactive on the remaining monitors.
• If a call is in progress with the outdoor unit and the CALL button is pressed on another outdoor unit, the call will be disconnected and the image of the new visitor will be displayed on the monitor. No call sound is emitted. The call will be accepted by the device automatically.
• In mode a photograph can be taken manually by pressing the camera button in the bottom right corner of the screen, or video can be recorded by pressing the “R” icon.
• When mode is activated, the outdoor unit indicates with a double beep sound that the camera of the unit is active. Door View mode stops after 30 seconds, which is indicated by the outdoor unit by a long beep sound. Activation of the camera on the outdoor unit for any reason, will be indicated in any case on the outdoor unit by a beep sound.
• Caution! If the primary device is not in use, Door View cannot be initiated on the secondary indoor unit, and the gate opener will not be functional either.

TAKING A PHOTO OR RECORDING A VIDEO
When a visitor pushes the door bell, or when optional alarm system signals – depending on the menu setting – a photograph will be taken or a video recording will be started automatically. Select one of the recording options in the RECORDING/ Automatic recording menu. Recordings can be taken manually, by pressing the camera icon in the bottom right corner of the screen, while in a call or when the Door View function is in use. In PHOTO mode, the internal memory can store approx. 30-50 still images (9.0M). Storage capacity can be extended by inserting a microSD card. The amount (size) of photographs that can be stored depends on the image content, i.e. lighting conditions and colours.

For VIDEO mode to be functional, a memory card needs to be inserted into the device (not included). Recorded images can be viewed and managed by tapping the REVIEW button on the screen.

• The length of videos that can be recorded exclusively on a memory card, is approx. 80 seconds.
• We recommend using a microSD card of at least CLASS10 grade, with a storage capacity of up to 128GB. After it is inserted, photographs will also be stored on the card.
• A successful recording is indicated by an “R” letter in a red circle in the bottom right corner of the screen. In the top left corner of the screen the name of the currently active camera will be displayed (Entrance 1, Entrance 2, CCTV 1, CCTV 2).
• If a recording is selected in the REVIEW menu, in case of a video, the Playback button will start video playback. The trash can icon in the top right corner of the screen deletes the selected photograph or video.
• The file name contains the time and date of the recording.
• Photographs are taken in JPG format, videos in AVI format. Recordings can also be viewed on a personal computer, by inserting the memory card into the PC.
• Photographs stored in the internal device memory can be copied (backup saving) to the memory card, if the system is restarted after the insertion of a memory card. This saving will be done automatically.
• The microSD slot for the storage of photos and videos is located on the right side of the monitor.

INTERCOM: CALL BETWEEN INDOOR UNITS
In case of at least two indoor units, the two units can call one another in standby mode.

• Tap the Internal call button on the screen to display the list of other devices installed in the various rooms. Tap the Monitor button of the desired room. The icon turns active, press the large green phone button.
• Accept a call on the other unit by pressing the green phone button.
• Finally, end the call by pressing the red phone button.
• If a visitor arrives during an internal call, the call will be disconnected. A ring tone is emitted and the visitor will be displayed on the screen. Accept the call normally by pressing the green phone button.
• The InterCom function can only be used if the “OUT” socket of one of the indoor units (master) is connected with the “IN” socket of the other indoor unit (slave). From among the connected monitors, the latter one will be the secondary device.
• A connecting accessory, and also a qualified technician will be required, so that a connecting cable suited to the given building is selected and installed. On the secondary device connected this way, WiFi connection will not be allowed and will be automatically disconnected, if it has been in use previously on the secondary device. A WiFi connection can only be established manually from the menu, if the connecting cable is removed from “IN” socket of the secondary device. In this case the device will not establish a connection automatically.

THE SETTINGS MENU

Tapping the gearwheel icon in the top left corner of the screen, displays the MENU function.

• In the MENU function, use the arrow icon in the top left corner of the screen to step one step back in the menu – all the way until exiting the menu.
• If no action occurs on the device for approx. 30 seconds, the monitor will turn off automatically.

To display the main MENU again, tap the gearwheel icon. Select the desired menu item. Most menus have further sub-menus or multiple setting options. When a setting is done, step back one level by tapping the arrow icon.——-

Recording
Entrance 1. RFID detection| yes / no| If the function is enabled, the door can be opened using the key cards without any intervention. If the function is disabled, first the door bell button has to be pressed on the outdoor unit, and the unit will only detect the door opening key card after that. In this latter case, the indoor unit will display the image of the arriving visitor.
Entrance 2. RFID detection| yes / no
Automatic recording| off| A recording will be made when the visitor rings the door bell. One of the three can be selected.
photograph
video
Enable motion detection| Enable motion detection| When enabled, the following further menu items can be accessed.
Select camera| Entrance 1/2, CCTV 1/2. Motion is detected based on the image of the selected camera. Only one option can be selected.
File format| Take photo or record video when motion is detected?
Sensitivity setting| Low / medium / high selectable.
Schedule motion detection| If the function is enabled, the device will only send a notification when motion is detected within the set time interval. Only one time interval can be set.
When motion is detected, the monitor turns on| If the function is enabled, the monitor will display the image of the selected camera for 60 seconds.
Surveillance cycles| 10 mp| When enabled, it cycles the images of cameras one after the other. It also tries to display the ones, which are not actually connected to a camera. In this case the monitor will appear dark for a certain amount of time. Where an active camera is present, a 5 second video will be recorded.
30 mp
60 mp
Wi- Fi
Enabled – disabled| WiFi connection can be established, network and password can be selected/set here.
Volume
Entrance 1. ring| Daily program| During the set time interval ringing will be emitted with the selected ring tone. 3 ring tones can be set to different time intervals.
Duration of ringing| Can be set between 3-20 seconds.
Ringing mode| Default, cannot be set.
Select ring tone| Six ring tones can be selected. The selected ring tone will be applied on the outdoor unit as well.
Ringing volume| Between 0-4. This setting does not modify the ringing volume on the outdoor unit.
Entrance 2. ring| Equivalent to the settings of Entrance 1.
Touch sound| on / off
Intercom ring tone| Select ring tone| 6 tones
Ringing volume| 0 – 4
Storage
Format SD card| When selected, the device will request a confirmation to format the SD card.| To format the card tap the check icon on the screen. To cancel the selected action tap “X”.
Delete data| Video| Both memories can be selected, deletes all videos, photographs stored on the SD card, or on both formats. To delete data saved on the internal memory, the SD card needs to be removed.
Photograph
SD card capacity| Free / Total| max. 128 GB
Internal storage capacity| Free / Total| max. 9 MB (approx. 30-50 images)
Date / Time
System time| The device obtains the exact time by means of a connection established using the TUYASMART application. In case of pairing, it will automatically set the exact time. This is where the current date and time can be set, when no WiFi connection is used. When the device is connected to a WiFi network, the date setting received with the TUYA app will be the default setting. If this is modified, it will again reset the correct date/time after a short time.
Display

Display setting| Brightness| Value can be selected between 0-20 by tapping the “+” and “–” buttons. The circling arrow icon in the top left corner will set all values to 10.| Tapping the centre of the screen in Door View mode displays the brightness, contrast and saturation settings of the monitor, along with a volume slider on the left side.
Contrast|
Saturation|
Enter standby mode| Monitor off (after 30 sec)| Turns off the monitor after 30 seconds.
Background slide show (the monitor stays active, displaying a previously set image) If Motion detection is enabled, the screen saver will not be activated.| Continuous display| The set screen is displayed continuously.
Program slide show| The screen saver will be activated during the set time interval. Outside that time interval the screen saver will not be used, the monitor will go dark.
Sleep mode| Brightness of the monitor is reduced during the set time interval.
List monitors (mode settings, even multiple, are displayed in sequence)| Time
Calendar
Review
Entrance 1 and CCTV 1
Entrance 2 and CCTV 2
Background image| No background image (black background)
Default image, preset background images while screen saver is active.
Monitor cleaning| The monitor will be inactive for 30 seconds. It will not sense any activity on the screen as a touch screen. This allows the monitor to be cleaned. Unwanted modification of various settings can be avoided while wiping the monitor clean.
Display| 0-100| Brightness of the display can be set with a slider.
Misc settings
Language| Select the language to display the menu.
Identify external display| Monitor 1| When using multiple indoor units in more rooms, the devices need to be distinguished from one another. Devices installed in each room can be named in this menu. In case of internal intercom calls, the device will appear by this name on the other devices. All devices need to be assigned a unique name, in order to establish internal communication between them. If two devices are assigned the same name, then it will not be possible to establish a connection with them, and the image of the outdoor camera will not appear either on the monitor of the secondary indoor unit connected as a slave device.
Monitor 2
Monitor 3
Monitor 4
Duration of gate opening signal| By pressing the button the setting steps from 1 sec up to 60 sec; this is how long the indoor unit transmits a signal to the lock opening relay (terminals NO-COM-NC on the indoor unit).
Lock open duration| By pressing the button the setting steps from 1 sec up to 60 sec.
Security password| 4 numbers, default setting: 1234. Change the password under this menu item. By pressing the APPLY button, the new password will be set. When the motion detectors connected next to the CCTV cameras are activated, the device requires the password to be entered, and it is also required to turn off/confirm the alarm signal of a detector.
System reset| Mindenképp visszaállítja a gyári beállításokat?| By approval of the prompt, all user settings will be deleted.
Weather| on / off| When enabled, the home screen will display the actual weather instead of the date / time. Cloudy, sunny… and the actual temperature value. Data is provided by the Tuya application.

Security setting

| Operation: Contacts of the motion- / door opening detection sensors should be connected between the “Flip” and “GND” points on the CCTV connectors. Select “Security setting” mode on the screen. Two shield symbols indicate the two sensors. The device anticipates a signal from a normally closed contact. If the contact is open upon entering the “Security setting” menu, the shield will appear in grey colour, as inactive. If the contact is closed upon entering the menu, the shield will appear in white colour. If the shield is white and the contact is closed, tapping a shield will change its colour to green. Tapping the “Execute” button under the shield activates the alarm; the “Execute” label changes to “Finished”. If the contact opens, the device sets off an alarm and a siren sound will be emitted. The siren will only be emitted on the indoor unit. The entire screen changes to flashing red, and the “Security alarm” message is displayed, indicating the sensor that has detected the alarm event. By tapping the “Stop” button the siren can be shut off. In case the contact is reset to closed position, the alarm can be turned off using the “Stop” button and by entering the password. Alarm mode cannot be turned off until the contact is again closed. Using the “Automatic recording” (AUTO REC) button under this same menu item, the automatic recording of the camera connected to the given motion detector can be set (a 10 sec video). If an SD card has not been inserted into the device, only a photograph will be taken. To view the recording tap the “Review” icon on the main screen. By tapping the three vertical lines icon in the top right corner, the device displays the alarm history of the detectors. The siren will sound for 1 minute, after which it stops, if no action occurs. Only the monitor will display an alarm signal with a red flashing background image.
version| Software version, factory data| Subject to change

ADDITIONAL DETAILS ABOUT SECURITY SYSTEM FUNCTIONS
Manual panic alarm: by tapping the flashing red police icon in the top right corner of the screen, a siren sound will be emitted from the indoor units while the camera is active. In addition to the up to two outdoor units with a camera, a qualified technician can extend the door phone even further by an additional two surveillance cameras and two door opening or motion detection sensors. (CAM1/DOOR1 and CAM2/DOOR2 connectors on the primary – MASTER – indoor unit)
The alarm can be heard through the speaker of the indoor unit for approx. 120 seconds. If the END CALL button is tapped during this time, the sound signal stops. Depending on the menu setting a photograph can be taken or a video can be recorded automatically.

• The two sensors can be fitted with either a normally closed or a normally open contact. The system recognizes these.
• An external power supply is required for the optional and connectible sensors and additional surveillance (CCTV) cameras (without one only up to 12V/150mA power supply is available).
• Alarm functions should be set by the qualified technician, who installs the system.

USING THE PROXIMITY KEYS (RFID)

If you have an electric lock, you can not only let guests in by the touch of a button while you are at home, but you and your family members can also conveniently enter when arriving home. By approaching one of the 5 included blue key cards towards the RFID module of the outdoor unit (located in the centre of the outdoor unit, indicated by the “CARD” label), the lock opens for a preset amount of time. This is indicated by a short sound signal emitted by the outdoor unit. The keys are aligned to your door phone via unique coding. (It can also be set under this menu item for the card reader to be active all the time, not only after pressing the door bell.) In addition to the door opening function, the RFID module of the outdoor unit can also be used for deleting and reassigning keys. Should you lose one of them or want to restrict the access of someone formerly given a key, you can delete all keys by a single move, so that unauthorized people cannot enter your home. After deletion, the blue key cards, which are still to be used, need to be reassigned to the door phone. The ones that are not reassigned (for example, the one that got lost), will no longer open the lock. If you wish to provide access to more than five persons – or you need to replace a lost or damaged key card – additional key card sets are also available for purchase: DPV 270RFID or other RFID125kHz type keys. You have to register these with the device before you can use them. Up to 24 keys can be paired with the system.

• Meaning of colours:
  blue user (USER) key for opening, red, delete (CLEAN) key, to delete all cards from the system at once, yellow (ADD) key for adding the blue key types. The cards supplied with the door phone are already configured for the unit. If necessary, you can use the following options.

• Assigning (adding) a new blue, user key:
  Move the yellow key close to the sensor. Two short beeps indicate that the device switched to add mode. Place the blue key you want to add close to the sensor. A long beep sound indicates successful adding of the given card. Adding of the blue key has to be confirmed by moving the yellow key close to the sensor. A long beep again indicates that adding was successful. Without this confirmation, the assigned (paired) blue key will not work. Then you can move on to the next blue key to be registered, and so on. After approx.30 seconds with no activity – or if the yellow key is touched to the sensor again – the device exits the key adding mode. This is confirmed by a long beep. Keys newly added will have the same code as the ones previously paired.

• Delete all previously assigned (blue) keys:
  Move the red, delete (CLEAN) key close to the sensor. A long beep indicates that you have deleted all blue user keys used so far. After the beep, the device returns to normal mode. In case use of the deleted key is attempted subsequently, the device emits a triple sound signal and does not open the lock. If required, the blue key cards, which are still to be used, can be paired again with the system using the yellow key. In case issues are experienced in the course of registration of the keys, contact an authorized service provider.

SMART MODES

Ring tone profiles – setting the place of stay
By tapping the last icon in the bottom row of the screen, the availability status of the user can be set.
At home: the visitor can push the door bell and talk to the person being at home. A notification is sent to the phone when the ringing cycle is finished. The visitor pushes the door bell, the ring tone can be heard on both the outdoor and indoor unit. A notification is sent to the phone.
Leave home: directly opens the message reminder, the visitor can leave a message, but the device also sends a notification to the phone. The visitor pushes the door bell, the following message is played on both the outdoor and indoor unit in English language: “I am currently away, please leave a message”. A 15 second video is recorded, containing the message of the visitor. After the ringing cycle, the device sends a notification to the phone, provided that the application is running normally in the background on the given phone. Notification content: “person in front of house”.
Sleep: when the door bell is pushed, the monitor screen is activated but remains silent. A message is sent to the phone when the ringing cycle is finished. Ringing can be heard from the outdoor unit. If the application is active on the phone, the phone will indicate the presence of the visitor using the normal method and sound.

• Information about the call appears on the phone and a video call with the visitor can only established through the phone, if the application is not only running in the background, but it is active on the phone screen. An application running in the background only receives notifications. In order to allow entry to the given visitor, or to start a call, the Smart Life (Tuya Smart) application has to be started. Under application settings, voice messages have to be allowed.

ANDROID AND IOS MOBILE PHONE APPLICATIONS

Using the application on a mobile phone or tablet running the specified operating system (refer to app. store) and connected to the internet, the following main functions are available from anywhere in the world, provided that internet access is available at the place of your stay and where the device is in use (at home).

TAKING A PHOTOGRAPH AND SENDING A NOTIFICATION IF THE VISITOR PUSHES THE DOOR BELL – TALKING TO THE VISITOR, REMOTE OPENING OF DOOR LOCK, RECORDING A PHOTO OR VIDEO MANUALLY, MOTION DETECTION ALARM, DOOR VIEW MODE TO CHECK THE PROPERTY OR THE VEHICLE…

Find and install the Smart Life (or Tuya Smart) application in the Google Play or App Store application store (or an alternative source).

Install an application (English language) to an Android or iOS phone, configure the basic settings of the application, and allow all access to data on the phone (data security permissions), which are required for the smooth cooperation of the two devices. The list of these permissions can be found in the app store, in the description of the programme. Access may be required for example to: location data, media content, storage, BT pairing and settings, prevent sleep mode, disable battery saver mode, launch app in background, display on top… In case of missing permissions, cooperation cannot be guaranteed! Some buttons, functions may not be functional and the application can crash and need to be restarted – until all required settings are configured! If you do not accept these terms, do not use the device with the application, only as a conventional appliance. The available functions and the necessary permissions may change with each software update.

• The image of the visitor and the option to open the door lock will be displayed on the mobile phone, if the application is running in the background. This is also required to start a call. Otherwise, only a message will be received on the phone.
• Due to the differences in mobile telephones and their operating systems, certain operating deficiencies and incompatibilities may arise, which are not caused by faults in the device. The connection may be affected by the software and hardware solutions of third parties; therefore, the operation, development, and changes are independent of the manufacturer of this product.
• In the event of the defective operation of the application, please verify whether the latest updates have been installed. If necessary, uninstall and reinstall the application. Functions may change as a result of updates.
• We cannot guarantee that all functions will match the descriptions in this manual due to reasons outside the control of the device manufacturer.

If the mobile phone has the right specifications and settings, and it is connected to a wireless network, additional functions become accessible. The device can be entirely utilized without the use of a smart phone as well. When writing this manual, we took into account the latest software version, which is continuously improved by the third party developer. We are unable to show the required permissions because those differ from device to device. Available functions are the ones introduced upon market entry of the device. Manufacturer or third party developments and software updates may result in changes to some functions and operation. The manufacturer of this product has no control over the functionality of the application that is generally available for use with various products.

The phone has to be connected to the Internet via the local 2.4GHz WiFi network. (If necessary, set the WiFi router accordingly.)

1. Find and install the Smart Life (or Tuya Smart) application in an application store. This can also be done by scanning a QR code, which will open the application store. After installation, tap the “Login” button, if you already have a Smart Life (Tuya Smart) profile registered on the given phone. Then open the application. Ensure that the device and the smart phone are as close to the Wi-Fi router as possible, and they are both connected to it. If you do not yet have a Smart Life (Tuya Smart) profile registered on the given smart phone, tap the “Register” button.

   • Select the country, enter your e-mail address and tap the “request a verification code” button.
   • Enter the verification code received in e-mail, and provide a password to be used in the application, consisting of numbers and letters. You will be provided 60 seconds to complete this.
   • When done, the application is ready to be used.

2. The next step is adding the device:

   • Connect the indoor unit of the door phone to the WiFi network. (Gearwheel icon in the top left corner to open the Settings / Wi-Fi menu item.)

   • When the device has established connection to the network, a QR code appears next to the name of the network. When tapped, the QR code is magnified to a size that can be scanned. •

   • By tapping the “red plus” symbol in the top left corner of the application screen, select the “Scan code” option from the drop down menu, and when the scanner is activated, scan the QR code from the monitor of the door phone.

   • The application will automatically establish a connection between the application and the door phone. When done, the application is ready to receive the call of the visitor, to open the gate, and to use door view through the outdoor unit.
     If another user has already connected to the outdoor unit, the application will not allow a new user to connect to the door phone using the QR code. In this case, the authorization has to be shared.

   • You can share access through the application with your family members and friends. From the bottom row of the phone screen, select the “Home” menu item.

   • After tapping the “•••” icon in the top right corner, select “Shared devices” function.

   • Tap the “Add” menu item, select a country / region and enter the Smart Life (Tuya Smart) user name of the person, with whom you wish to share access to the door phone. Tap the “Execute” icon. An invitation will be sent to the authorized person. The invited person will have the same authorizations as those of the person sending the invitation.

   • WiFi router: The device supports only 2.4GHz connections; it cannot be connected to 5GHz networks. Set the WiFi router accordingly. The WiFi password may not contain any special characters, such as ~!@#$%&*… The name of the network and the password cannot be longer than 24 characters each. For the purpose of commissioning, place the device and the mobile phone close to the router and connect them both to the same WiFi network. If you later wish to connect it to another router, delete the device from the phone application and reset factory settings on the device. Carry out the above described configuration again.

   • The application is the property of a third party, features and setting options of the application may change without the knowledge and consent of the manufacturer of this device! A minimum level of English language knowledge may be necessary for using the application.

TROUBLESHOOTING

If there is no sound or image, check the following:

• the device connected exactly as instructed
• power supply is available from the grid
• all cables are intact
• RESTART THE PRODUCT (SETTINGS MENU)

If the volume or image quality of the call is low, check the following:

• connecting cables with the adequate cross-section were used
• recommended maximum distances were maintained
• no interference is caused by nearby electrical appliances
• settings in the menu and volume control on the side of the screen are correct

CLEANING
Before cleaning, remove the plug of the power cord from the wall socket. Use a soft, dry cleaning cloth. Clean the monitor with a lightly moist wipe cloth, carefully not to scratch the surface. Do not use aggressive cleaning agents.

AC ADAPTOR

AC ADAPTOR

input (PRI)| 100-240 V~ / 50-60 Hz • 0,6 Amax.
output (SEC)| 15.0 V“ / 1.5 A max.
polarity|

SPECIFICATION

Manufacturer’s name or trade mark, commercial registration number and address|
---|---
Model identifier| FJ-SW1241501500E
Input voltage| 100-240 V~
Input AC frequency| 50 / 60 Hz
Output voltage| 15,0 V
Output current| 1,5 A
Output power| 22,5 W
Average active efficiency| 87,60%
Efficiency at low load (10%)| –
No-load power consumption| 0,097 W

Producer: SOMOGYI ELEKTRONIC® • H – 9027 • Győr, Gesztenyefa út 3. • www.somogyi.hu
Distribuitor: S.C. SOMOGYI ELEKTRONIC S.R.L.
J12/2014/13.06.2006 C.U.I.: RO 18761195
Cluj-Napoca, judeţul Cluj, România, Str. Prof. Dr. Gheorghe Marinescu, nr. 2, Cod poştal: 400337
Tel.: +40 264 406 488, Fax: +40 264 406 489 • www.somogyi.ro

References

• Zed d.o.o.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>