ZEBRA MC33XX Accessories Handheld Mobile Computer User Guide
- June 1, 2024
- ZEBRA
Table of Contents
MC33XX
Accessories
Regulatory Guide
MC33XX Accessories Handheld Mobile Computer
User Information
Refer to the MC33XX Mobile Computer User Guide for information on using the
accessories. Go to: www.zebra.com/support.
Regulatory Information
This device is approved under Zebra Technologies Corporation.
This guide applies to the following Model Numbers: CRD-MC33-2SUCHG, CBL-
MC33-USBCHG, SHARECRADLE-01, SHARECRADLE-MC and SHARECRADLE-ME.
All Zebra devices are designed to be compliant with the rules and regulations
in the locations they are sold and will be labeled as required.
Local language translations are available at the following website:
www.zebra.com/support.
Any changes or modifications to Zebra equipment not expressly approved by
Zebra could void the user’s authority to operate the equipment.
Declared maximum operating temperature: 40°C.
CAUTION
Only use Zebra approved and UL Listed accessories, battery packs and battery
chargers.
Do NOT attempt to charge damp/wet mobile computers or batteries. All
components must be dry before connecting to an external power source.
Power Supply
Cradle model: SHARECRADLE-01, CRD-MC332SUCHG Use ONLY a Zebra approved
Nationally Recognized Test Laboratory (NRTL) Certified ITE (SELV) power supply
with electrical ratings: Output 12 VDC, min 4.16 A, with a maximum ambient
temperature of at least 40° C. Use of alternative power supply will invalidate
any approvals given to this unit and may be dangerous.
Cradle model: SHARECRADLE-MC, SHARECRADLEME
Use ONLY a Zebra approved Nationally Recognized Test Laboratory (NRTL)
Certified ITE (SELV) power supply with electrical ratings: Output 12 VDC, min
9 A, with a maximum ambient temperature of at least 40° C.
Use of alternative power supply will invalidate any approvals given to this
unit and may be dangerous.
Radio Frequency Interference Requirements-FCC
**** Tested to comply with FCC Standards
FOR HOME OR OFFICE USE
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of pursuant to Part 15 of
the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However
there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help.
Radio Frequency Interference Requirements – Canada
CAN ICES-3 (B)/NMB-3(B)
CE Marking and European
Economic Area (EEA) Statement of Compliance
Zebra hereby declares that this device is in compliance with all applicable
Directives, 2014/30/EU, 2014/35/EU and 2011/65/EU.
The full text of the EU Declaration of Conformity is available at the
following internet address: www.zebra.com/doc.
Japan (VCCI) – Voluntary Control
Council for Interference
Class B ITE
Other Countries
China
www.zebra.com/support
**Eurasian Customs Union**
Turkish WEEE Statement of Compliance
Waste Electrical and Electronic Equipment (WEEE)
For EU Customers: All products at the end of their life must be returned to
Zebra for recycling. For information on how to return product, please go to:
www.zebra.com/weee.
Warranty
For the complete Zebra hardware product warranty statement, go to: www.zebra.com/warranty.
Service Information
Before you use the unit, it must be configured to operate in your facility’s
network and run your applications.
If you have a problem running your unit or using your equipment, contact your
facility’s Technical or Systems Support. If there is a problem with the
equipment, they will contact the Zebra Global Customer Support at
www.zebra.com/support.
For the latest version of this guide go to:
www.zebra.com/support.
CMM
(Parts)|
---|---
(pd)| (Hg)| (Cd)
| (Cr(V I))| (P BB)| (P BDE)
(Metal Parts)| X| 0| 0| 0| 0| 0
(CircuitModules)| X| 0| 0| 0| 0| 0
(Cables and CableAssemblies)| 0| 0| 0| 0| 0| 0
(Plastic and Polymeric
Parts)
| 0| 0| 0| 0| 0| 0
(Optics and Optical Components)| 0| 0| 0| 0| 0| 0
IED. (Batteries)| 0| 0| 0| 0| 0| 0
This table was created to comply with China RoHS requirements.
Zebra Technologies | 3 Overlook Point | Lincolnshire, IL 60069 USA
www.zebra.com
ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies
Corporation, registered in many jurisdictions worldwide.
All other trademarks are the property of their respective owners.
©2019 Zebra Technologies Corporation and/or its affiliates. All rights
reserved.
Printed in China
Documents / Resources
|
ZEBRA MC33XX Accessories Handheld Mobile
Computer
[pdf] User Guide
MC33XX Accessories Handheld Mobile Computer, MC33XX, Accessories Handheld
Mobile Computer, Handheld Mobile Computer, Mobile Computer, Computer
---|---