QAZQA 08718881025501 Brescia Combi LED Wall Lamp Instruction Manual
- June 1, 2024
- QAZQA
Table of Contents
QAZQA 08718881025501 Brescia Combi LED Wall Lamp
Specifications
- Input: 220-240V~
- Frequency: 50Hz
- Socket Type: E27, Max. 40W
- Model: BresciaCombiWL
- IP Rating: IP20
- CRI: >70
- Expected Lifetime: 30,000 hours
- Manufacturer: FittinQ B.V.
- Manufacturer Address: Smaragdweg 52, 5527 LB Hapert, The Netherlands
Product Usage Instructions
- Suitability for Use Indoors: This luminaire is suitable for indoor use. Ensure that the ambient temperature is around 25°C.
- Non-Replacable Light Sources: The LED of this luminaire is not replaceable. When the light source reaches its end of life, the entire luminaire should be replaced.
- Positioning: Position the luminaire in a way that prolonged staring into the light at a distance closer than 0.5m is not expected.
Contact Information
FittinQ B.V.: Smaragdweg 52, 5527 LB Hapert, The Netherlands | Website:
www.qazqa.nl
FittinQ LTD: 55 Baker Street, London, W1U 7EU United Kingdom
FAQ
Q: Can the LED in the luminaire be replaced?
A: No, the LED in this luminaire is not replaceable. When it reaches its end
of life, the whole luminaire should be replaced.
INSTRUCTION MANUAL
Safety Precautions
Brescia Combi WL
- Suitability for use “indoors”, the related ambient temperature is 25°C.
- For non replacable light sources: The LEDof this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced”
- The luminaire should be positioned so that prolonged staring into the luminaire at a distance closer than 05 m is not expected.
Brescia Combi WL 1W LED incl.LED:QL7001120 220-240V~ 50Hz
This product contains a light source of energy efficiency class
- 08718881025495(90591)
- 08718881025501(90592)
- 08718881025518(90593)
- 08718881025525(90594)
- 08718881025532(90595)
- 08718881084003(96890)
Replaceable (LED only) light source by a professional.
Replaceable control gear by a professional.
SAFETY INSTRUCTION
Please study the instruction manual and below information carefully before installing or using this product. Please keep this user manual for further reference
- The luminaires may only be installed by authorized and qualified technicians according the valid regulations for electrical installation.
- Maintenance of the luminaires is limited to their surfaces. During maintenance no moisture can come into contact with any areas of the terminal connections or voltage control parts.
- The electrical supply must be switched off at the outset, preferably by means of a switch in the distribution box, before any installation, maintenance or repair work is undertaken.
- Exterior lighting must not be installed during rain.
- Take account of the minimal separation distance from other objects and the room required around the fitting.
- If in any doubt, consult a professional, taking local installation requirements into account. Some countries stipulate that lighting may be installed only by registered installers.
- Clamping screws in electrical connections must be adequately tightened. This is particularly the case with 12V low voltage conductors.
- Clean with a clean, dry cloth or brush, use no solvents or abrasives. Avoid dampness on all electrical components
- Take account of all available technical information.
- Meaning of symbols:
This luminaire cannot be disposed together with normal domestic waste in standard rubbish can, but you have to bring it to a staging area for electrical waste
Take note of the symbols when connecting wires.
FittinQ B.V.
Smaragdweg 52, 5527 LB Hapert, The Netherlands
www.qazqa.nl