RYOBI PCL665 18 V Flexible LED Clamp Light User Manual

PCL665 18 V Flexible LED Clamp Light
User Manual
REGISTER YOUR TOOLS
http://register.ryobitools.com
1-800-525-2579

IMPORTANT SAFETY INSTRUCTIONS

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP IT FOR FUTURE REFERENCE.

WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious personal injury.

WARNING!
When using electric appliances, basic precautions should always be followed, including the following:

• Read all the instructions before using the appliance.

• To reduce the risk of injury, close supervision is necessary when an appliance is used near children. Do not permit children to use light.
  It is not a toy. The temperature of the LED will become hot after being on for only a short period of time. This hot temperature can cause burn injury if touched and can create sufficient heat to melt some fabrics.

• To reduce the risk of electrical shock, do not put the light or charger in water or other liquid. Do not place or store appliances where they can fall or be pulled into a tub or sink.

• If wrapped or in contact with fabrics, the light lens can produce sufficient heat to melt some fabrics. To avoid serious personal injury, never allow the light lens to come in contact with anything.

• Do not use or permit the use of light in bed or sleeping bags. This light lens can melt fabric and a burn injury could result.

• Use only the charger supplied by the manufacturer to recharge.

• Use this product only with batteries and chargers listed in tool/ appliance/battery pack/charger correlation supplement 987000-432.

• Use only recommended battery pack. Any attempt to use another battery pack will cause damage to your light and could possibly explode, cause a fire, or personal injury.

• Remove the battery pack from the light before performing any routine maintenance or cleaning.

• Do not disassemble the light.

• Do not place or operate an LED light, battery, or charger near fire, heat, or flammable liquids/gases. They may explode. Also, do not dispose of a worn-out battery pack by incinerating it. Do not incinerate the battery, even if it is severely damaged or completely worn out. The battery may explode in fire.

• Keep light dry, clean, and free from oil and grease. Always use a clean cloth when cleaning. Never use brake fluids, gasoline, petroleum-based products, or any strong solvent to clean the light.

• Don’t expose light to rain. Water entering a power tool will increase the risk of electric shock or malfunction.

LIGHT USE AND CARE

• This product is for household use only.

SAFETY RULES FOR LIGHT

• Always remove the battery pack before storing the device.

SAVE THESE INSTRUCTIONS

SYMBOLS

The following signal words and meanings are intended to explain the levels of risk associated with the product.

SYMBOL SIGNAL MEANING

DANGER : Indicates a hazardous situation, which, if not avoided, will result in death or serious injury.
WARNING : Indicates a hazardous situation, which, if not avoided, could result in death or serious injury.
CAUTION : Indicates a hazardous situation, that, if not avoided, may result in minor or moderate injury.
NOTICE : (Without Safety Alert Symbol) Indicates information considered important, but not related to a potential injury (e.g. messages relating to property damage).

Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer.

and understand the operator’s manual before using this product.
| Wet
Conditions Alert| Do not expose battery or internal flash-light components to rain or water.
| Recycle Symbols| This product uses Lithium-ion (Li-Ion) batteries. Local, state, or federal laws may prohibit the disposal of batteries in ordinary trash. Consult your local waste
authority for information regarding available recycling and/or disposal options.
V| Volt| Voltage
min| Minutes| Time
****| Direct Current| Type or a characteristic of current

PRODUCT SPECIFICATIONS

Light Output ……………………….400/200 Lumens (Flood) or 200/100 (Spot)
Neck Length …………………………………………………………………………… 16 in.

OPERATION

See Figures 1 – 3.

WARNING:
If any parts are damaged or missing do not operate this product until the parts are replaced. Use of this product with damaged or missing parts could result in serious personal injury.
WARNING:
Do not direct the light beam at persons or animals and do not stare into the light beam yourself (not even from a distance). Staring into the light beam may result in serious injury or vision loss.

A – Flexible neck
B – LED lens
C – Hi/low/off button
D – Clamp
E – Battery pack
F – Insert the battery pack into the battery port as shown
G – Make sure the latches on the battery pack snap into place and the battery pack is secured in the product before beginning the operation
H – Depress the latches and pull to release and remove the battery pack
I – Pivoting collar

A – Twist and position the flexible neck and rotate the collar to direct light as desired.
NOTE : Do not twist tubing more than 360° on its axis.

A – Squeeze the ends of the clamp to open the clamp mouth and install the light to a mounting surface that is 1-3/4 in. thick or less.
B – Pull out for the spotlight
C – Push in for flood light

TTI CONSUMER POWER TOOLS, INC.
P.O. Box 1288, Anderson, SC 29622
Phone 1-800-525-2579
USA, Teléfono 1-800-525-2579
www.ryobitools.mx 800-843-1111 (en México)
www.ryobitools.com
998000913
1-14-22 (REV:01)

Documents / Resources

| RYOBI PCL665 18 V Flexible LED Clamp Light [pdf] User Manual
PCL665 18 V Flexible LED Clamp Light, PCL665, 18 V Flexible LED Clamp Light, Flexible LED Clamp Light, LED Clamp Light, Clamp Light, Light
---|---

References

• REIMAGINE WITH RYOBI - RYOBI Tools
• Herramientas Eléctricas Ryobi

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>