BOUNDLESS 2024 CFX+ Vaporizer Instruction Manual
- June 1, 2024
- BOUNDLESS
Table of Contents
2024 CFX+ Vaporizer
Instruction Manual
Getting Started
Power On/Off
Hold both buttons for 3 seconds. The CFX+ will vibrate when turned on/off.
Menu Screen
The Options to select on the screen are as follows:
Start ( Select this option to enter the heating screen and start the session)
Temperature Units (C°/F°)
Session Time: (2 minutes, 4 minutes, 6
minutes, 8 minutes) 
Menu Screen
Controls
Main Menu Controls
Use up and down to cycle through the menu.
Click both buttons at the same time to select or change a setting.
Preset Mode
Preset Mode will start the session at one of he 4 presets.
Highlight one of the presets on the menu and select “Start” to begin the
session at the choosen preset.
See Preset temperature table. The default preset is set to P2 (370F). Precision Mode
In Precision Mode ( ), the temperature can be adjusted by single digits up to
430F/221C.
Cycle through the options of the Preset/Precision Mode selection until the
Precision Mode icon ( ) is highlighted. Once the Precision Mode option is
highlighted, select start to begin. Start/Heating Screen
Select Start to begin the session. Label start temp in the chart
Stand By Screen
Once the session is completed, the CFX+ will enter into “Stand By” mode.
Features
Magnetic Mouthpiece
An upgraded magnetic mouthpiece is featured in the CFX+. The magnetic
mouthpiece sits on top of the ceramic herb chamber and can be removed by
lifting up on the mouthpiece lip near the air path exit. 
On-Board
Stir Tool
The onboard Boundless stir tool is located underneath the mouthpiece in the
silicone mouthpiece screen holder. This tool can be used to stir your herb
during the session and help with emptying the herb once the session is over.
Charging
The CFX+ features USB – C charging. It is recommended to use the provided
USB – C cable .
Average of 12 – 4 minute sessions on a full battery.
Recharges in an average of 45 minutes.
Cleaning
It is recommended to rinse with warm water then use up to 91% isopropyl
alcohol to clean the mouthpiece top piece, zirconia cooling path, and
mouthpiece screen. Rinse with warm water again thoroughly then air-dry
overnight.
For the silicone mouthpiece screen holder, it is recommended to clean with
warm to hot water then air-dry overnight. The chamber can be cleaned with
isopropyl alcohol and cotton swabs. Be sure to hold the unit upside when
cleaning to avoid any liquid falling into the unit. Before using the CFX+
after cleaning, perform a few burn-off sessions to ensure that the unit is
sterilized.
Warnings & Disclaimers
Recommended Cool Down
It is recommended to let the CFX+ cool down after 2 consecutive sessions to
ensure a prolonged lifespan of the unit.
Isopropyl Alcohol Warning
Be advised when using isopropyl alcohol to clean your CFX+. It is recommended
to only use isopropyl alcohol for cleaning the chamber or the zirconia cooling
path and zirconia holder.
Choking Hazard
The CFX+ contains small parts which may be a choking hazard to small children.
Keep the device away from children.
Handling the CFX+
- Do not drop, deform, bend, crush, puncture, incinerate, microwave, shred, paint, or insert foreign objects into a CFX+ or try to repair or modify the CFX+ yourself.
- Do not clean the CFX+ other than instructed by Boundless Technology.
- Do not use a damaged CFX+ charger or non-Boundless Technology charger. Incompatible chargers may carry different voltages which may be a fire hazard.
- Use caution when handling the CFX+ as the heating chamber gets very hot. Refrain from direct contact with the heating chamber when hot or heating up.
- Do not leave the device unattended when it is powered on or while the device is still hot.
- Do not leave in extreme temperatures.
- Do not charge on carpet or bare rug.
Contact
We Are Happy To Help!
Email Us [email protected]
For Replacement Parts,
Tutorials, & More
boundlesstechnolgy.com/cfx+
Online Retail Store
boundlesstechnology.com
Follow Our Socials @BNDLSTECH
BOUNDLESSTECHNOLOGY.COM/CFX+