USA Distributor Kitchen Measuring Guide User Guide
- June 1, 2024
- USA Distributor
Table of Contents
USA Distributor Kitchen Measuring Guide
Product Information
Specifications:
- Brand: USA PHILADELPHIA KITCHEN AND BATH
- Product: Kitchen Measuring Guide
- Website: www.usadistributor.com
- Contact: 215.867.5200
- Email: info@usadistributor.com
Product Usage Instructions
1. Kitchen Shape & Dimensions
Begin measuring in inches only using a tape measure. Use the gridlines provided to draw your kitchen layout and record measurements.
2. Measure Windows & Doors
Measure and record window and door dimensions. Use the provided symbols for water lines, drain lines, and gas lines in your layout.
3. Wall Openings
Measure the distance from the wall corner to the outside edge of the opening and record the length. Repeat for all openings.
4. Utility Supply Lines
Draw a side view plan of each wall, including soffit measurements if applicable. Use symbols for water lines, drain lines, and gas lines.
5. Appliances & Clean-up Selections
Provide detailed information about your appliances including dimensions and style/type.
Additional Notes & Instructions:
After completing all measurements, scan or take photos of the guide and email to chat@usadistributor.com for assistance with your Free Kitchen Design.
FAQ
- Q: Can I use centimetres instead of inches for measurements?
- A: It is recommended to use inches for consistency and accuracy throughout the measuring process.
- Q: How do I indicate soffits in my kitchen layout?
- A: Include soffit measurements in your side view plan, marking them with appropriate symbols for clear representation.
- Q: What should I do if I have additional questions about appliance selection?
- A: Feel free to contact us at 215.867.5200 or email us at info@usadistributor.com for further assistance.
Kitchen Shape & Dimensions
Begin in any corner of the room with a tape measure and measure to an adjacent wall. Important Notes: Always measure in inches only. Use gridlines on the 2nd page to draw your kitchen layout and record measurements
Measure Windows & Doors
Window Measurements
Door Measurements
Wall Openings
Measure the distance from the wall corner to the outside edge of the opening and mark it on the drawing. Measure and record the length of the opening. Repeat this process for all openings. (Example 1, Floor Plan)
Utility Supply Lines
Draw a side view plan of each wall. Record the distance from the floor to the ceiling. If you have soffits, include the measurements on the layout. Use the symbols shown below to mark water lines, drain lines, and gas lines. (Example 2, Elevation)
- W – Water Lines
- D – Drain Lines
- G – Gas Lines
Appliances & Clean-up Selections
Please provide as much information as possible about your appliances
- All dimensions in inches (example: 45″)
Suggested Tools
- www.usadistributor.com
- 215.867.5200
- info@usadistributor.com
Additional Notes & Instructions:
Submit Kitchen Measurements
After you have completed all the kitchen measurements, scan or simply take photos of the guide and e-mail to chat@usadistributor.com. Please feel free to send us any additional photos of your kitchen, or any other details that may assist us with your Free Kitchen Design
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>