ALIBELL SC-R70 Wireless Calling System Panic Alarm for Elderly User Manual
- June 1, 2024
- ALIBELL
Table of Contents
ALIBELL SC-R70 Wireless Calling System Panic Alarm for Elderly User Manual
Product introduction
Wireless digital display receiver adopts advanced wireless receiving technology, integrates up to 31 ringtones, 2-language broadcast and supports LED display 24-hour time. When the call button is triggered, the wireless digital display receiver broadcasts the corresponding number or ringtones and displays the button number. With simple operation and stylish appearance, this receiver is widely used in care institution, nursing home, hospital etc.
Features
- Support number call in English and Japanese
- 31 ringtones to choose
- 24-hour time display
- 5 adjustable volume levels (0-100dB, including mute)
- Up to 99 transmitters can be added
- Signal distance: 150m(open space)
- Memory function, no loss of accessories, time or set ringtones after power off
Operation Guide
·Power on
Plug the receiver into the AC socket(100-240V 50-60Hz), the receiver will make
a “drip” sound and the screen displays from 00:00 to 99:99 in sequence, the
version number of the current product (lasts for 2S) will be displayed at the
end, and then the current time will be displayed. Then the receiver
successfully starts up.
Setting
·Time display
Long press the 【 △ 】 key and 【 ▽ 】 key at the same time, the receiver
“beeps” twice, “hours” starts to blink, then short press the【 △ 】 key, the
hours will be clockwise +1. Long press the 【 △ 】key to increase the hours
clockwise continuously; Press 【 ▽ 】key for hours counterclockwise -1, and
long press 【 ▽ 】 to continuously reduce the hours counterclockwise. After
the setting is complete, press 【 】 key “Minutes” to start blinking, and then
set it in the above way.
![ALIBELL SC-R70 Wireless Calling System Panic Alarm for Elderly User Manual
- Time display](https://manuals.plus/wp-
content/uploads/2024/04/ALIBELL-SC-R70-Wireless-Calling-System-Panic-Alarm-
for-Elderly-User-Manual-Time-display-1.jpg)
·Choose receiver ringtone’s
Short press 【 △ 】 key to switch and play the current selected ringtones
in sequence, the number of ringtones displayed increases by 1, long press 【
△ 】 key to continuously switch ringtones clockwise, it will play and
display the number of ringtones currently selected after setting.
Short press 【 ▽ 】key to switch and play the current selected ringtones in
reverse order, and the number of ringtones
displayed decreases by 1. Long press【 ▽ 】key to continuously switch
ringtones counterclockwise, play and display the number of ringtones currently
selected after setting.
Short press 【 △ 】to switch the ringtone in order.
Long press 【 △ 】to switch the ringtone continuously.
Short press 【 ▽ 】to switch the ringtone in reverse order.
Long press 【 ▽ 】to switch the ringtone in reverse order continuously
·Change the volume levels
Short press 【 】button to set the volume circularly.
(4-3-2-1-0-1-2-3-4-3-2-1-0…0 for mute)
Note: The volume of the receiver will automatically change to the maximum when
the receiver is powered on again.
Add call buttons
·Add a normal call button (the ring tones can be changed)
(Please make sure that the number of the currently set call button ringtone
is not 01, 02) Long press 【 】 key, the receiver “beeps” to enter the state of
adding buttons, and the number of the added buttons is displayed. Trigger the
call button, the receiver “beeps” twice, the button number increases by 1,
indicating that the current button has been added successfully and you can
continue to add other buttons at this time. “Beep” sound indicates the current
call button has been added; “beeps” three sounds indicate that the call
buttons cannot be added.
·Add a call button with fixed ringtone (Optional)
After selecting a primary fixed ringtone (except 01, 02), long press 【 ▽ 】
and 【 】keys at the same time, the receiver “beeps” to enter the adding button
state, and displays the number of the button that has not been added at
present. Trigger the call button, the receiver “beeps” twice, and the button
number increases by 1, indicating that the current button has been added
successfully. At this time, you can continue to add other buttons of the same
ringtone. “Beep” sound indicates the current call button has been added;
“Beeps” three sounds indicate that the call buttons cannot be added. To add
the buttons of other different ringtones, press any key or 20 seconds without
any operation to exit the adding state, and then follow the above operation.
Linguistic calling mode
·Japanese calling mode
Press the【 △ 】 key or 【 ▽ 】 key to select the number of the ringtone
as 01, indicating Japanese call mode. Trigger the call button (except the
button with fixed ringtone), the receiver will display the number and
broadcast “XX call” in Japanese.
·English calling mode
Press the 【 △ 】 key or 【 ▽ 】 key to select the number of the ringtone
as 02, indicating English call mode. Trigger the call button (except the
button with fixed ringtone), the receiver will display the number and
broadcast “XX call” in English.
Delete call buttons
Press and hold the 【 】 key to enter the adding button state. Press and hold the 【 △ 】 or 【 ▽ 】key to adjust the number of the button to be deleted, and then press and hold the 【 】 key again. The receiver “beeps” four times, and the last digit of the number changes from “H” to “-“, indicating that the current call button has been deleted (for example, “01H” changes to “01-“, indicating that the call button No. 1 has been deleted).
![ALIBELL SC-R70 Wireless Calling System Panic Alarm for Elderly User Manual
- Delete call buttons](https://manuals.plus/wp-
content/uploads/2024/04/ALIBELL-SC-R70-Wireless-Calling-System-Panic-Alarm-
for-Elderly-User-Manual-Delete-call-buttons-1.jpg)
Note:
- Call buttons, fixed ringtone buttons, voice broadcast call buttons can be added 99 pieces in total.
- Trigger the button, the receiver will display the button number and broadcast the corresponding number or ringtone, and automatically return to the standby page 10 seconds later.
- In the adding buttons state, press any key or perform no operation for 20 seconds to exit the adding state.
Delete all call buttons and back to factory defaults
Press and hold the 【 】 key to power on until the receiver “beeps” ten times slowly and then “beeps” six times faster, and then releases it, the screen will display 00:00-99:99 in sequence, and the current version number will be displayed at the end (for 2S) and then the current time, indicating that all buttons have been deleted, the volume will be restored to the loudest, and the receiver will be restored to factory settings.
Step 1: Press and hold the 【 】 key in the power off state.
Step 2: Plug in the receiver while holding the 【 】 key