SEALEY APICS2 Shelf for Industrial Cabinets Instruction Manual
- June 1, 2024
- SEALEY
Table of Contents
SEALEY APICS2 Shelf for Industrial Cabinets
Thank you
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to instruction manual.
SAFETY
- GENERAL SAFETY
‰ WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using these shelves and cabinets.
✔ Locate the cabinet in a suitable work area.
✔ Keep the work area clean, uncluttered and ensure there is adequate lighting.
‰ WARNING! Use the cabinet on level and solid ground, preferably concrete.
✔ Keep the shelf clean and tidy in accordance with good workshop practice.
✔ Keep children and unauthorised persons away from the work area.
✖ DO NOT use the cabinet for any purpose other than that for which it is designed.
✖ DO NOT use the cabinet outdoors.
✖ DO NOT place the cabinet in a damp or wet location or an area where there is condensation.
✖ DO NOT clean the cabinet or shelves with any solvents which may damage the surfaces or the protective coating.
✖ DO NOT move the cabinet when there are items placed inside.
✖ DO NOT step on the shelves.
✖ DO NOT overload the shelves or cabinet
INTRODUCTION
APICS2 Pack of two shelves for Model No. APICCOMBOH2. Supplied with easy
assemble brackets for shelves to slide onto. APICS4
Pack of four shelves for Model No’s APICCOMBO2, APICCOMBOF4, APICCOMOBO5 and
APICCOMOBO7. Supplied with easy assemble brackets for shelves to slide onto.
SPECIFICATION
Model No: …………………………………………………. APICS2
Dimensions: ……………. (W x D x H): 840 x 380 x 30mm
Model No: …………………………………………………………………… APICS4
Dimensions: ………………………………. (W x D x H): 840 x 380 x 30mm
ASSEMBLY
- Assemble as per diagram.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.
REGISTER YOUR PURCHASE HERE
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is
required for any claim.
Customer Support
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
