SEALEY LED24WL Portable Floodlight 24W SMD LED 230V Instruction Manual
- June 1, 2024
- SEALEY
Table of Contents
SEALEY LED24WL Portable Floodlight 24W SMD LED 230V
Specifications:
- Product: 24W SMD LED Portable Floodlight
- Power Input: 230V
- Model Number: LED24WL
Product Usage Instructions
Safety Guidelines:
It is crucial to adhere to the safety instructions provided to ensure safe operation of the product:
- Check all electrical equipment and connections for wear and damage before use.
- Use an RCD with all electrical products for added safety.
- Maintain the appliance in a safe condition if used for business purposes.
Electrical Safety:
Follow these guidelines to ensure electrical safety:
- Inspect cables, plugs, and connections regularly for wear or damage.
- Ensure the correct voltage rating and fuse in the plug before connecting to the power supply.
- Avoid pulling or carrying the appliance by the power cable.
General Safety:
General safety precautions for using the floodlight:
- Turn off mains power before servicing or maintenance.
- Install the light correctly following the provided instructions.
- Avoid directing the light into a person’s eyes to prevent potential eye damage.
Maintenance:
Proper maintenance ensures longevity and safe operation of the floodlight:
- Maintain the light in good condition.
- Repairs should only be done by a qualified electrician or authorized service agent.
Frequently Asked Questions (FAQ):
-
Q: What is the recommended fuse rating for the floodlight?
A: The recommended fuse rating is 10Amp. -
Q: Can I use the light near flammable substances?
A: DO NOT use the light near flammable, combustible, or explosive liquids, solids, gases, or equipment for safety reasons.
MODEL NO : LED24WL
Thank you for purchasing a Sealey product. Manufactured to a high standard,
this product will, if used according to these instructions, and properly
maintained, give you years of trouble-free performance.
IMPORTANT : PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE
OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND
WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE
DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE
INSTRUCTIONS SAFE FOR FUTURE USE.
- Refer to Instruction Manual
SAFETY
ELECTRICAL SAFETY
-
WARNING! It is the user’s responsibility to check the following:
-
Check all electrical equipment and appliances to ensure that they are safe before use. Inspect power supply leads, plugs and all electrical connections for wear and damage. Sealey recommends that an RCD (Residual Current Device) is used with all electrical products.
if the lamp is used in the course of business duties, it must be maintained in a safe condition and routinely PAT (Portable Appliance Test) tested. -
For electrical safety information, the following information must be read and understood.
-
Ensure that the insulation on all cables and on the appliance is safe before connecting it to the power supply.
-
Regularly inspect power supply cables and plugs for wear or damage and check all connections to ensure that they are secure.
-
Ensure that the voltage rating on the appliance suits the power supply to be used and that the plug is fitted with the correct fuse.
-
DO NOT pull or carry the appliance by the power cable.
-
DO NOT pull the plug from the socket by the cable.
-
DO NOT use worn or damaged cables, plugs or connectors.
-
This product is fitted with a BS1363/A 3-pin plug. If the cable or plug is damaged during use, switch the electricity supply and remove it from use. Repairs must be carried out by a qualified electrician.
-
Replace a damaged plug with a BS1363/A 3-pin plug.
- Connect the GREEN/YELLOW earth wire to the earth terminal ‘E’.
- Connect the BROWN live wire to the live terminal ‘L’.
- Connect the BLUE neutral wire to the neutral terminal ‘N’.
-
Ensure that the cable outer sheath extends inside the cable restraint and that the restraint is tight. Sealey recommends that repairs be carried out by a qualified electrician.
GENERAL SAFETY
- WARNING! Turn off the mains power supply before servicing or performing any maintenance.
- Ensure the light is installed correctly by these instructions.
- If you use an extension lead the cable must be fully unwound from the drum.
- DANGER! DO NOT direct the light into a person’s eyes. All models have a very intense light output which, if incorrectly used, could cause eye damage.
- DO NOT use the light without the front glass shield.
- DO NOT use the light near flammable, combustible or explosive liquids, solids, gases or equipment.
- Maintain the light in good condition. Repairs must only be undertaken by a qualified electrician (use an authorised service agent).
- Locate the light in an adequate area for its function, and keep area clean and tidy and free from unrelated materials.
- When not in use, switch off the light and disconnect from the power supply. Ensure that the unit is cool and dry and then store in a safe, dry, childproof area.
- DO NOT install the light where it is likely to be knocked or hit.
- DO NOT install in bathrooms, shower rooms, sauna or such locations.
INTRODUCTION
Portable floodlight with adjustable stand. 24W SMD LED worklight producing up to 3000 lumens. Tension adjuster on both sides of the hinge to fix the frame at the desired angle. The light angle is separately adjustable within the frame. Durable folding frame makes for easy storage -collapsed size 235 x 270 x 58mm. Simple on/off switch on the reverse of light. 1.9m cable supplied with 3-pin plug
SPECIFICATION
- Model No:……………………………………………….. LED24WL
- Colour Temperature:………………………………………6500K
- Dimensions (WxDxH):……………………235 x 270 x 58mm
- IP Rating:………………………………………………………..IP40
- LED Type:………………………………………………………SMD
- Power:…………………………………………………………….24W
- Lumen Output:……………………………………………. 3000lm
- Power:…………………………………………………………….24W
- Supply:…………………………………………………………..230V
OPERATION
- Position the floodlight in the area that requires illumination, resting on a sturdy surface and adjust the lamp angle as required.
- This LED floodlight develops minimal heat and is not subject to the same restrictions that apply to halogen lamps that become too hot to touch. We do however recommend that the floodlight should not be placed in cramped or restrictive situations and recommend the following minimum distances between the light and any surface/object.
- 500mm minimum between the top of the light and any overhead surface, or objects.
- 200mm between the sides of light and any surface.
- 1-metre minimum between the front of the light and any object to be illuminated.
- Plug the light into the power supply and press the switch on the back of the unit to switch on/off.
- Adjust the frame and light angle by using the hand wheels on the sides of the unit.
- WARNING! Ensure the light is disconnected from the mains power supply when not in use Ensure that the unit is cool and dry and is stored in a cool, dry, childproof area.
MAINTENANCE
- Clean the casing externally (not the glass) with a moist cloth.
- DO NOT use solvents or abrasives.
- If necessary clean the glass with alcohol and a soft cloth.
Parts support is available for this product. Please email sales@sealey.co.uk or telephone 01284 757500
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools,
accessories and packaging should be sorted, taken to a recycling centre and
disposed of in a manner that is compatible with the environment. When the
product becomes completely unserviceable and requires disposal, drain any
fluids (if applicable) into approved containers and dispose of the product and
fluids according to local regulations.
WEEE REGULATIONS
Dispose of this product at the end of its working life in compliance with the
EU Directive on Waste Electrical and Electronic Equipment (WEEE). When the
product is no longer required, it must be disposed of in an environmentally
protective way. Contact your local solid waste authority for recycling
information
Note: It is our policy to continually improve products and as such we
reserve the right to alter data, specifications and parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty
Guarantee is 12 months from purchase date, proof of which is required for any claim
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk.
IP32 7AR
01284 757500 sales@sealey.co.uk
www.sealey.co.uk
© Jack Sealey Limited
REGISTER YOUR PURCHASE HERE
Documents / Resources
|
SEALEY LED24WL Portable Floodlight 24W SMD LED
230V
[pdf] Instruction Manual
LED24WL Portable Floodlight 24W SMD LED 230V, LED24WL, Portable Floodlight 24W
SMD LED 230V, Floodlight 24W SMD LED 230V, 24W SMD LED 230V, LED 230V
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>