Holwim B0C84QKR4B Remoe Central RemoteKit User Manual
- June 1, 2024
- Holwim
Table of Contents
Holwim B0C84QKR4B Remoe Central RemoteKit
Product Information
Specifications:
- Static current: 10mA
- Shock Sensor Current: [Specification missing]
Features:
- Application: Fits Most Vehicles, Cars, Trucks, SUVs
- Feature: Provides Better Security With Keyless Remote Control
- Full Kit Includes: 2 Keyless Entry Remote Controls, 1 5-wire
Actuator, 3 2-wire Actuators, Wire Manual, and Hardware
Product Usage Instructions
Lock Command:
- Turn off the engine and exit the car.
- Press the lock button. If the car has an automatic shutdown system, the warning light will flash once, and the doors will automatically close. The start LED will flash approximately 1 time per second.
Unlock Command:
- If the car has an automatic locking system and you are approaching the car, press the unlock button on the transmitter.
- The alarm light will flash 2 times, and the doors will automatically open.
Car Finding:
- When the system is under the arm mode, press and hold the button for 2 seconds.
- The siren will sound, parking lights will flash for 15 seconds.
This feature is useful for finding the car in a large parking lot.
Open the Trunk:
- Press the button for 2 seconds to send a signal to open the trunk.
Mute Arming:
- When you press the mute button, the siren will not chirp, parking lights will flash once, and the system will enter arm mode.
Learning Code:
For installation wiring diagrams and learning button functions, refer to
the manual provided.
FAQ (Frequently Asked Questions)
-
Q: How can I program a new remote control?
A: To program a new remote control, refer to the learning code section in the manual for detailed instructions. -
Q: What should I do if the alarm does not respond to the remote?
A: Check the battery of the remote control and ensure that it is within range of the vehicle. If issues persist, consult the troubleshooting section of the manual or contact customer support.
Lock command:
- Turn off the engine and get out of the car.
- Press the “ ” button. If the car is equipped with an automatic shutdown system, the warning light will flash once and the doors will automatically close, The start LED flash approximately 1 time per second.
Unlock Command:
If the car is equipped with an automatic locking system and you are
approaching the car, press the “ ” button on the transmitter, the alarm light
will flash 2 times, and the doors will automatically open.
Car finding
When system is under the arm mode， Press and hold the 
button 2 seconds siren
sounds. parking light will flash 15 seconds, this feature is particularly
useful to find the car in a large car
Open the trunk!
When you press the 2 seconds button, the negative signal to open the safe
will“ be sen
Mute arming
When press“ ” ,siren will not chirp, parking lights flash 1 time, system entry
arm mode. If equipment with central door lock, car doors lock
automatically.The start LED flash approximately 1 time per second.
Learning code
Press the code learning switch for 2 seconds, LED lights will long bright all
the time, enter into the status of code learning module, then release the code
learning switch, press any button of the remote control once, central lock
executes one lock, this means the first remote code learning succeed. Code
learning of second remote is same as the first one, at most can learn two
remote controls, After the two remote control learning code succeeded, or
there is no any action within seconds, LED lights will go out, code learning
status exit.
NOTE: When learning the new remote controls, the code inside old remotes
will be cleare cout, can not remote any more
INSTALLATION WIREING DRAWING
APPLICATION:
Fits Most Vehicle, Car, Truck, SUV
FEATURE:
Provide Better Security With Keyless Remote Control SPECIFICATION: Full Kit
Includes: 2 Keyless Entry Remote Control, 1 5-wire actuators, 3 2-wire
Actuators, Wire
Manual and Hardware
Specification and Features
(A) Mainframe system
- Working Voltage:12V/24V±3V
- Static current:10mA
- Shock Sensor Current:<1mA
- Out Current(max): Direction Light:5A；Siren:10A
- BIBI Pager:10A; Central Door locking:10A
- Working Frequency:433MHZ
(B) Remote Control
- Working Voltage:12V/9V/6V/3V
- Static Current:1mA
- Battery size: 27A/CR2032
- Working Frequency:433MHz
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>