ONAGAD Folding Fixed Shelf Brackets Installation Guide
- June 1, 2024
- ONAGAD
Table of Contents
ONAGAD Folding Fixed Shelf Brackets
PACKAGE CONTENTS
METHOD 1: E TRACK SYSTEM
- STEP 1: Assemble with bolts and nuts
- STEP 2: Snap them into the anchor points of E track
- STEP 3: Place the board on top
- STEP 4: Tighten and secure the board with the short screws
Q: Why do the brackets drop down and are not square to the wall when mated
to the E-track?
A: By nature of how the e track works , the shelf will have a certain
“looseness” to it. It’s normal for the shelf to lean forward a bit. E track is
made more for things to pull on it. On the shelf bracket, the physics of the
shelf push down on the bottom of the bracket and the result is a bit of a tip
forward.
How to Do?
Solution 1: Because each manufacture produce E-tracks that vary in
specifications, you will need to go to the store and buy shims of a certain
thickness to use the washers as spacers to lift the front edge, depending on
the situation.
Solution 2: Attach the rubber pads in the package to the E-track connectors to
lift the front edge.
METHOD 2: WALL MOUNTING
- STEP 1: Determine the location of the hole and mark it
- STEP 2: Use a drill to punch the holes
- STEP 3: Put the expansion anchors into the pre-drilled holes
- STEP 4: Put the long screws through the brackets and install them
- STEP 5: Place the board on top
- STEP 6: Tighten and secure the board with the short screws
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>