SOAN SNT942W Alarm System User Manual

SOAN SNT942W Alarm System

Product Information

Specifications

• Working voltage: 5V/1A
• Built-in battery: 3.7V 1000mAH
• Solar panel max. charging current: 70mA
• Detection range: 6-8m (affected by temperature)
• Installation height: 1.3-1.8m
• Standby current: 0.1mA
• Volume: 120db max. (adjustable)
• Ringtone: 39
• Detection angle: 140 degrees
• Working environment: -15°C to 50°C
• Device status: It shows offline after disconnection from network for 24 hours
• Size: 60mm68mm130mm

Product Usage Instructions

Product Overview

This product is a new generation of intelligent WIFI solar panel infrared and microwave alarms built by our excellent design team. The style of the alarm is modern and simple which is in line with the aesthetics of modern people, and can be integrated into the modern home environment. The built-in large curvature lens design makes its detection more accurate and the false alarm rate is lower. It can detect thieves from a long distance and alarm quickly. Adopting The music IC and the 40mm wide-band loudspeaker which makes the sound clear and pleasant. Loud without distortion. It uses the built-in physical buttons to adjust the ringtone and volume, and you can better experience the interactive design.

Product Overview

Installation Operation

1. Download the Tuya Smart app from the app store and install it.
2. Open the Bluetooth and location settings on your phone.
3. Ensure that your router is working and open the Tuya Smart app.
4. Click on “Add Device” and select “Auto Search Device Nearby”.
5. Power on the device and long press the pairing key for 6-12 seconds until its red LED blinks rapidly.
6. Find the device in the app and add it.
7. If your WiFi is not already connected, input the WiFi password when prompted.
8. Click “Done” to complete the installation.

Functional Operation

1. Power switch: The power switch is located on the back of the device. Switch it to the left end to turn it on and to the middle or right end to turn it off.
2. Volume key: Press the volume key to cycle through the four-volume levels (silent, level 1, level 2, level 3).
3. Ringtone switching: Press the ringtone key to cycle through the 39 available ringtones. After a power failure, the ringtone will automatically reset to the first one.
4. Battery level detection: The device will automatically detect the battery status every 8 hours and upload the data accordingly. The error range is 10%.
5. How to distinguish multiple devices when one device alarms: In the app, go to the device interface and click on the upper right corner. Change the device name. When the device alarms, it will push a message with the changed device name. Click APP – enter the device interface -click / in the upper right corner – change the device name. Then when it alarms, it pushes the message by the changed device name.
6. The device is shared by multiple people. Click APP – enter the device interface – click / in the upper right corner – choose share device – add sharing– add other Tuya account
7.  The same account works with multiple devices in different WIFI environments Connect multiple devices in different places to the same APP account. For example: add a device at home via home wifi; add another device in the office via office wifi.
8. Turn off the device APP alarm push message Click APP – enter the device interface – setting — select to turn off the corresponding alarm option. E.g. turning off a human detection alarm, there will be no APP notification when it detects people.

Perform walking test

1. 1. Start the test at least 2 minutes after turning on the device.

2. Walk breadthwise at the remote area of the detection coverage at a speed of 0.75m/s within 3m.
3. The detector will make a sound, its red LED will flash, and an alarm will occur.
4. Test in different directions to confirm the two boundaries of the coverage and ensure the detector is appointed to the central desired area.
5. Repeat step 2 and step 3 at the near area of the detection coverage.

FCC Caution

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
   Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

3. Reorient or relocate the receiving antenna.

4. Increase the separation between the equipment and receiver.

5. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

6. Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the
radiator & your body.

Installation Notes

Method 1: Device can be rotated

1. Fix the bottom cover to the wall with screws
2. Secure the bracket to the bottom cover with a swivel nut
3. Press and buckle the bracket on the device

Method 2: Device fixed angle

1. Fix the bracket on the wall with screws
2. Press and buckle the bracket on the device

Bracket disassemble

1. Prepare a flat-blade screwdriver
2. Insert a flat-blade screwdriver here
3. Turn the screwdriver to open the bracket

Alarm Tracks

1. DingDong+DingDong
2. dingdong_x2 (echo)
3. Chord ascending(135i)
4. Chord descending(i531)
5. DingDong
6. DingDongx2(fast)
7. Westminster Chimes
8. For Alice
9. vocal5351
10. voca13511531
11. Four little swan
12. Blue love
13. Rhythm of the rain
14. The Little Mermaid
15. A Comme Amour
16. vocal245
17. Turkischer Marsch_01
18. The Butterfly Lovers
19. Eine Kleine Nachtmusik
20. symphony NO. 40 in minor
21. Minuet
22. Telephone ringing
23. City of sky
24. Red River Valley
25. Jingle Bells
26. Titanic
27. Kungfu
28. Nokia Classic Ring
29. short song ringtone
30. Lullaby
31. Scarborough fair
32. Congratulations
33. The William Tell Overture
34. Romance De Amor
35. Memory
36. Radetzky March
37. kiss the rain
38. Merry Christmas
39. Alarm sound

Notes for device pairing:

1. Make sure the device, mobile, and router are as near as possible
2. Make sure wifi broadcast is turned on, not hidden.
3. Make sure the router encryption is WPA2-PSK, and the authentication type is AES or set both to auto. Wireless mode could not be set to 11n only.
4. If the number of devices connected to the router reaches the upper limit, you can try to disable a device to vacate the channel.
5. If pairing fails repeatedly, try to use another phone as a hotspot. Connect your phone to the hotspot of the other phone and then repeat the pairing process. If it works, that means the device is working. Reset your home router and try the pairing again.

Mobile push settings

IPhone: Settings -Notifications-find Tuya smart app—allow notifications
Xiaomi: settings – notification and status bar – notification management – find tuya APP – click to allow various notifications – then exit to return settings – – find authorization management – self-start management – allow APP to auto-start.
Huawei : settings – notification and status bar – notification management – find tuya APP – click to allow various types of notifications – then exit to return settings — find authorization management – find tuya APP – permissions – self-start management – allow the auto-start.
OPPO/VIVO Mobile: Phone Settings – Status Bar and Notifications – Manage Notifications – Find tuya App – Allows all types of push. – Exit the return settings – Authorization management – find the Tuya APP – allow self-starting. Other mobile phone settings are basically the same.

Precautions for use

1. Use a router from a regular manufacturer. This product currently only supports the 2.4G WIFI frequency band.
2. This product can reduce the occurrence of accidents, but it cannot be guaranteed you are 100% safe. For your safety, in addition to using it correctly, the product should be regularly inspected and maintained. Trigger an alarm at regular intervals to make sure it works okay.
3. Mobile APP usage is not affected by the WIFI range. As long as the device is connected to WIFI, the mobile phone can monitor the status of the device at any time as long as the device is connected to wifi.
4. There is a microwave sensor inside the device, and a device of the same microwave frequency cannot appear within the microwave sensing range. It is not recommended to install the same products 6 meters apart without obstruction, otherwise, they may interfere with each other.
5. This device comes with solar charging, and the solar charging is directional. When it is fixedly installed or the sun does not appear for a long time, it cannot ensure that solar energy is fully charged. Users can charge it via USB charging after a period of time.
6. For outdoor installation, be sure to install it on a fixed wall. If installed on a branch or wooden sign, false alarms may occur if there is shaking by wind or else.

APP smart scene-setting

Example 1: The device makes a call and/or sends sms to user if being triggered Open APP – click Me in the lower right corner — Featured –Phone notification/message notification —-after you purchased it successfully return to main interface – click smart – create a scene – click when device status changes – choose the device – alarm – send notification – phone or message notification – at last press confirm and save it.

Example 2: Set linkage with wifi siren when the device alarms Open APP -click smart- choose automation — create scene – click when device status changes — choose device – choose alarm – Run the device – choose wifi siren- click turn on – at last press confirm and save it.

FAQ

Q: How can I turn off the device’s app alarm push message?

A: In the app, go to the device interface, click on “Settings”, and select the corresponding alarm option to turn it off. For example, if you turn off the human detection alarm, there will be no app notification when it detects people.

Q: Can I use the same account with multiple devices in different WiFi environments?

A: Yes, you can connect multiple devices in different places to the same app account. For example, you can add a device at home via home WiFi and add another device in the office via office WiFi.

Copyfish

The desktop screen capture helper is not yet installed. This free helper app is required as the browser extension alone can not take desktop screenshots.

Download the helper appRead moreCancel

x

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>