Shenzhen Taimeng Technology Co Ltd MGKG100 US Switch User Manual
- June 1, 2024
- Shenzhen Taimeng Technology Co Ltd
Table of Contents
Shenzhen Taimeng Technology Co Ltd MGKG100 US Switch
Product Specifications
- Model: MG-SMS102
- Switch Type: US Switch
- Wiring Options:
- No Neutral Wiring Diagram
- Have a Neutral Wiring Diagram
- Compliance: FCC Part 15
Product Usage Instructions
- Long press any button on the switch.
- Wait for the indicator light to flash quickly.
- Release your hand.
- Search for the switch signal.
- Click to confirm and complete the setup.
Frequently Asked Questions
- Q: What should I do if the indicator light does not flash quickly after pressing a button?
- A: If the indicator light does not flash quickly, try resetting the switch by turning off the power supply and repeating the setup process.
- Q: Can I use this switch with smart home systems?
- A: Yes, this switch is compatible with most smart home systems. Please refer to your smart home system’s user manual for specific integration instructions.
- Q: Is professional installation required for this switch?
- A: While professional installation is recommended, users with basic electrical knowledge can install this switch following the provided wiring diagrams and instructions.
Product parameters
- Relay: 10A
- Voltage: AC 110~240V 50/60Hz
- Current: 10A/Cang
- Type-C Output: 5V1A ( No Neutral No function)
- Work temperature: 0°C~40°C
- Wireless frequency: 2.40Hz
- Material: VO flame retardant PC + ABS
- UK/EU Size: 8.68.63.88cm
- US Size: 127.23.84cm
US Switch
Product List
- Switch *1
- Screw * 2
- Manual *1
- Packaging box *1
- Capacitance * 1 (No Neutral Wiring)
Warm Tips
- Support 2.4CHz Wi-Fi Simplified steps to install App on your smart
- phone or tablet on Apple / Google Play Store. Works with Amazon Alexa, Google Home. For
- indoor use only.
- Type-C is slightly hot in charging, and the
- temperature is about 55° C. It is normal and does not need to worry.
This manual is a universal version. Please find the corresponding parameters, network methods and usage methods according to the products you purchased.
Replace the glass panel
Separate the upper and lower parts from the switch by a screwdriver.
When the switch is energized, do not put a cover on the glass panel. The glass panel is covered when power is applied, then the switch will not function. Please restart the main power switch in your home, it will work.
Wiring Diagram
US: No Neutral Wiring Diagram
US: Have Neutral Wiring Diagram
- Long press any button, wait for the indicator light to flash quickly, and then release your hand.
- Search the switch signal, click to done.
WiFi Pairing Method
- Method one: Quick pairing signal
- Long press any button, wait for the indicator light to flash quickly, and then release your hand.
- Open the “Smart life” application, click on the right corner of the “+” homepage on the upp part, wait for a while, You will see the pop -up window, and then select “Add”.
- Method two: Manual pairing signal
- Long press any button, wait for the indicator light to flash quickly, and then release your hand.
- Click “*” in the upper right corner, select”Electrical”, select Switch Wi-Fi and add the device according to the instructions.
Warranty
From the date of purchase, the product has been a year of warranty. If you have any product problems or suggestions, please contact us at any time, we will deal with all quality -rela ssues by replacing or refunding. Human damage does not support replacement or refund.
Certificate
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference toradio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20cm between the radiator & your body.