MUSCLE D PL-PS-BS Pro Strength Booty Shaper Instruction Manual

MUSCLE D PL-PS-BS Pro Strength Booty Shaper

Product Information

• Specifications:
  • Name: Pro Strength Booty Shaper
  • SKU: PL-PS-BS
  • Dimension: 80 x 60 x 57 inches
  • Net Weight: 564 lb
• Safety Instructions:
  • Thank you for choosing our company’s product. Correct use of the trainer ensures your safety and convenience. Before using the trainer, please read the following carefully:
  • Before using this product, carefully read all the instructions and strictly follow the methods described in the manual. Keep this manual throughout the entire lifespan of the product.
  • The product owner should ensure that all users are aware of all safety precautions.
  • Ensure the indoor air is fresh and circulated, and make sure there is enough space for movement when using the machine.
  • Users are responsible for ensuring the proper maintenance of the equipment. After installation and before usage, conduct a safety check.
• Installation Steps:
  • Product Description:
  • The Pro Strength Booty Shaper is designed to help you target and tone your lower body muscles effectively.
  • Maintenance Guide:
  • Regularly inspect and tighten bolts in all parts of the machine, ensuring that moving parts are flexible and free of abnormal noises.
  • Keep the machine clean, but avoid using strong cleaning solvents for wiping.
  • If any load-bearing parts show signs of wear or damage, replace them immediately. Do not use the machine until it is fully repaired.

FAQs

• Q: How often should I inspect the machine for maintenance?
  • A: It is recommended to inspect the machine for maintenance at least once every month to ensure optimal performance and safety.
• Q: Can the Pro Strength Booty Shaper be used by beginners?
  • A: Yes, the Pro Strength Booty Shaper is suitable for users of all fitness levels, including beginners. It is important to start with lower-intensity workouts and gradually increase as you build strength and endurance.

Safety Instructions

Thank you for choosing our company’s product. Correct use of the trainer ensures your safety and convenience. Before using the trainer, please read the following carefully:

1. Before using this product, carefully read all the instructions and strictly follow the methods described in the manual. Keep this manual throughout the entire lifespan of the product.
2. The product owner should ensure that all users are aware of all safety precautions.
3. Ensure the indoor air is fresh and circulated, and make sure there is enough space for movement when using the machine.
4. Users are responsible for ensuring the proper maintenance of the equipment. After installation and before each use, check that all fasteners are securely tightened and that there are no protruding parts. Regularly inspect the condition of parts prone to wear and tear.
5. In case of damage to your equipment, please contact the dealer and the company’s after-sales service department immediately to replace all worn or defective parts. Do not use the equipment until it is completely repaired.
6. Before use, please wear appropriate sportswear and sports shoes. Do not wear skirts or jewellery, and tie up your hair to avoid interference during exercise.
7. Warm up before exercising with the machine.
8. If you experience abnormal symptoms such as dizziness, pain, or vomiting, stop exercising immediately and consult a doctor.
9. Children should use the machine for selective training under adult supervision.
10. Warning! Keep hands and feet away from moving parts.
11. Warning! Do not exceed the set adjustments.
12. Warning! Keep children or pets away from the machine during exercise.
13. Warning! All adjustment devices must be properly adjusted during use.
14. Warning! Please use the machine correctly for exercise. Using incorrect methods or exercising beyond the capabilities of the machine may cause harm to your health.
15. It is recommended to use this equipment only within supervised areas.

Installation Steps

1. Installation step one****
   Parts Checklist

   No.| Name| Specs| Qty.
   1| Ground Fixing|  | 1
   2| Main Frame|  | 1
   3| Curved Connection Plate| 20052.5T6| 2
   4| Drum Pad| Φ12| 8
   5| Hexagon Lock Nut| M12| 4
   6| Socket Cap Screw| M12*125| 4

2. Installation Step Two
   Parts Checklist

   No.| Name| Specs| Qty.
   7| Foot Swing Arm|  | 1
   8| Socket Head Cap Screw| M1225| 2
   9| Spring Washer| ￠12| 2
   10| End Cap| Φ43.514.5| 2
   11| Shaft| Φ25*143| 1

3. Installation Step Three
   Parts Checklist

   No.| Name| Specs| Qty.
   4| Drum Pad| Φ12| 6
   5| Hex Lock Nut| M12| 3
   12| Socket Head Cap Screw| M1275| 3
   13| Outer Guard Plate| 21585.3T6| 1
   14| Support Sleeve| Ø1838| 1
   15| Foot Pedal|  | 1

4. Installation Step Four
   Parts Checklist

   No.| Name| Specs| Qty.
   5| Hex Lock Nut| M12| 2
   8| Socket Head Cap Screw| M1225| 2
   9| Spring Washer| ￠12| 4
   10| End Cap| Φ43.514.5| 2
   16| Rotating Shaft| Ø2586| 1
   17| Rotating Axis| Φ17105| 1
   18| Hex Nut| M12| 1
   19| Flat Washer| ￠12| 2
   20| Socket Head Cap Screw| M1245| 1
   21| Knob Handle| Φ6035| 1
   22| Knob Pin| Φ23.738.3| 1
   23| Knob Pin2| Φ956.75| 1
   24| Front Rotating|  | 1
   25| Rear Rotating|  | 1

5. Installation Step Five
   Parts Checklist

   No.| Name| Specs| Qty.
   5| Hex Lock Nut| M12| 2
   8| Socket Head Cap Screw| M1225| 2
   9| Flat Washer| ￠12| 4
   10| End Cap| Φ43.514.5| 2
   16| Rotating Shaft| Ø2586| 1
   17| Rotating Axis| Φ17105| 1
   26| Armrest Swivel Fixing|  | 1

6. Installation Sept Six
   Parts Checklist

   No.| Name| Specs| Qty.
   27| Seat Cushion| 48941060| 1
   28| Armrest Pad| 28013360| 2
   29| Socket Head Cap Screw| M8*25| 12
   30| SpringWasher| ￠8| 12
   31| Flat Washer| ￠8| 12

Note: Installation complete, tighten all bolts in each part, and use screw caps for all drum pad positions.

Product Description

• This indoor fitness equipment is designed for aerobic cardiovascular exercise, focusing on improving cardiovascular function while also aiding muscle training.
• It targets various muscle groups, promoting strength and aesthetic goals.
• Illustrated diagrams demonstrate correct equipment usage and muscle training methods for easy understanding.
• Weight selection through the weight stack assembly allows convenient adjustment of resistance levels.
• The machine’s design conforms to the human body’s movement trajectory, ensuring safety and durability.
• We use large-diameter steel pipes for manufacturing and electrostatic spray coating for durability, ensuring the safety, reliability, and longevity of the machine.

Maintenance Guide

1. Regularly inspect and tighten bolts in all parts of the machine, ensuring that moving parts are flexible and free of abnormal noises.
2. Keep the machine clean, but avoid using strong cleaning solvents for wiping.
3. If any load-bearing parts show signs of wear or damage, replace them immediately. Do not use the machine until it is fully repaired.
4. Pro Strength Booty Shaper (PL-PS-BS)

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>