WHITE TOP ADVENTURES SQ-3-V2 Ford Transit Headliner Shelf Organizer Installation Guide
- June 1, 2024
- WHITE TOP ADVENTURES
Table of Contents
WHITE TOP ADVENTURES SQ-3-V2 Ford Transit Headliner Shelf Organizer
Specifications
- Model: Ford Transit Shelf
- Package Contents:
- Ladder Bottom x1
- Ladder Top x1
- M6-30 Hexgon Head Screw x4
- M10-22 Hexgon Head Screw x2
- M10-30 Hexgon Head Screw x2
- Mount Plate x1
- M6-16 Button Head Screw x4
- M6 Flat Washer x8
- M10 Spring Lock Washer x2
- M10 Nylock Nut x2
- Railnut x2
- M6 Nylock Nut x4
- M10 Flat Washer x4
Product Usage Instructions
Assembling the Ladder:
Place the ladder halves front side down. Insert the couplers into one half and tighten down using the M6-16 screws. Slide the other ladder half onto the couplers and tighten down. Optionally, you can use blue Loctite on the screws.
Installing on Van Roof:
Slide the two railnuts into the roof rail of your van. Position the ladder on the van, hanging it on the roof rail. Loosely screw the top of the ladder down to the roof rail using the M10-22 screws, M10 spring lock washers, and M10 flat washers just enough to make it snug. It’s recommended to place the ladder close to the rear wheel well.
FAQ
Q: Where can I find additional installation assistance?
A: For further installation assistance or troubleshooting, please contact us at LQIR@ZKLWHWRSDGYHQWXUHV.com.
Q: Can I modify the placement of the ladder on my van?
A: While we recommend placing the ladder close to the rear wheel well, you can adjust its position based on your preference as long as it is securely attached to the roof rail.
It is crucial to ensure that all WTA products are assembled and securely
attached to your vehicle. Failure to do so may result in automobile accidents,
posing a significant risk of bodily injury or even death to yourself and
others. As the owner, it is your responsibility to properly assemble and
secure WTA products, diligently inspecting the mounting points and attachments
before use, and regularly checking for any signs of wear or damage.
To guarantee optimal safety, we strongly advise engaging the services of a
professional installer for the installation of any aftermarket accessories to
your vehicle. If you lack mechanical experience or are unfamiliar with the
installation procedures, it is imperative to have the product installed by a
qualified professional or individuals who possess the necessary expertise.
Remember, the responsibility lies with you, and it must be taken seriously to
ensure the safety of all individuals involved.
PACKAGE CONTENTS
LET’S GET STARTED
- PLACE THE LADDER HALVES FRONT SIDE DOWN, INSERT THE COUPLERS INTO ONE HALF (SEE FIGURE 1), AND TIGHTEN DOWN USING THE M6-16 SCREWS.
- SLIDE THE OTHER LADDER HALF ONTO THE COUPLERS AND TIGHTEN DOWN. NOTE- IF DESIRED YOU CAN USE BLUE LOCTITE ON THE SCREWS.
- NEXT, SLIDE THE TWO (2) RAIL NUTS INTO THE ROOF RAIL ON YOUR VAN. NOTE- IF YOU’VE ALREADY INSTALLED A ROOF RACK, THIS MAY BE TIME CONSUMING.
- NOW POSITION THE LADDER ON THE VAN, HANGING IT ON THE ROOF RAIL. LOOSELY SCREW THE TOP OF THE LADDER DOWN TO THE ROOF RAIL USING THE M10-22 SCREWS AND THE M10 SPRING LOCK WASHERS AND M10 FLAT WASHERS JUST ENOUGH THAT IT IS SNUG (SEE FIGURE 3)
NOTE- WE LIKE TO PLACE THE LADDER AS CLOSE TO THE REAR WHEEL WELL AS WE CAN. SEE IMAGE BELOW.
GET THERE WITH WHITE TOP ADVENTURES
thanks!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>