WHITE TOP ADVENTURES SPRR170-J Sprinter 170 High Roof Strata Roof Rack Installation Guide
- June 2, 2024
- WHITE TOP ADVENTURES
Table of Contents
WHITE TOP ADVENTURES SPRR170-J Sprinter 170 High Roof Strata Roof Rack
Product Specifications
- Product Name: Sprinter 170 High Roof Strata Roof Rack
- Model: SPRR170-J
- Package Contents:
- Driver Rear Rail – Qty-1
- Passenger Front Rail – Qty-1
- Passenger Rear Rail – Qty-1
- Crossbar – Qty-6
- Rail Nut – Qty-4
- Hexagon Head Screw – Qty-12
- Spring Lock Washer – Qty-12
- Washers – Qty-12
Product Usage Instructions
Installation Process
Start by loosely attaching the side rails to the roof rails using the provided M10-22 hexagon head screws, M10 spring lock washers, and M10 washers. Do not tighten down at this stage.
Detailed Steps
- Refer to Figure 3 for detailed instructions on attaching the side rails to the roof rails.
- Ensure all components are aligned properly before tightening the screws.
- Use the included hardware pack to secure the rails and crossbars in place.
- Double-check all connections and tighten all screws securely.
Contact Information
If you encounter any difficulties during installation or have questions regarding the product, please contact White Top Adventures at info@whitetopadventures.com for assistance.
Frequently Asked Questions (FAQ)
Q: How do I know if the roof rack is installed correctly?
- A: Ensure all components are securely fastened, and there is no movement or wobbling when the rack is installed.
- Double-check the alignment and tightness of all screws.
Q: Can I use the roof rack for heavy cargo?
- A: The roof rack is designed to carry a specific weight limit.
- Please refer to the product specifications for the maximum load capacity before loading heavy items.
Q: Do I need any special tools for installation?
- A: The installation process requires basic tools such as a hex key or wrench for tightening the screws.
- Ensure you have these tools available before starting the installation.
Sprinter 170 High Roof Strata Roof Rack
- Ensuring the proper assembly and secure attachment of all WTA products to your vehicle is of utmost importance. Failure to adhere to these guidelines may lead to automobile accidents, presenting a substantial risk of bodily harm or even fatality to yourself and others. As the owner, it is incumbent upon you to meticulously assemble and secure WTA products, conduct a thorough examination of the mounting points and attachments before use, and routinely check for any indications of wear or damage.
- To ensure optimal safety, we strongly recommend enlisting the services of a qualified installer for the installation of any aftermarket accessories on your vehicle. If you lack mechanical expertise or are unfamiliar with the installation procedures, it is crucial to have the product installed by a certified professional or individuals with the requisite skills. Remember, the responsibility rests with you, and it must be approached with seriousness to safeguard the well-being of all individuals involved.
PARTS Description
THANK YOU!
- PLEASE INSPECT THE PRODUCT TO ENSURE THERE WAS NO DAMAGE INCURRED DURING SHIPPING.
- IF THERE IS DAMAGE TO REPORT, PLEASE CONTACT OUR CUSTOMER SERVICE DEPARTMENT AS SOON AS POSSIBLE.
- NEXT, USING THE “PACKAGE CONTENTS” PAGE, CHECK INVENTORY AND FAMILIARIZE YOURSELF WITH THE PARTS AND HARDWARE.
- GATHER ALL TOOLS REQUIRED FOR INSTALL.
- 10 mm WRENCH
- 17 mm WRENCH
TOOLS
PACKAGE CONTENTS
HARDWARE PACK
INSTALLATION INSTRUCTION
LET’S GET STARTED!
- SLIDE HALF OF THE RAIL NUTS INTO THE PASSENGER-SIDE FACTORY ROOF RAIL, AND HALF OF THEM INTO THE DRIVER-SIDE RAIL.
- SPACE OUT THE RAIL NUTS CLOSE TO THE FINAL POSITION (GROUPS OF 2) SEE FIGURE 1 FOR ROUGH REFERENCE DIMENSIONS.
- START LOOSELY ATTACHING THE SIDE RAILS TO THE ROOF RAILS USING THE M10-22 HEXAGON HEAD SCREW & M10 SPRING LOCK WASHERS & M10 WASHERS, BUT DO NOT TIGHTEN DOWN (SEE FIGURE 3 FOR DETAIL)
- PLACE YOUR CROSSBARS IN DESIRED LOCATION, LOOSELY BOLTING THE M8-20 HEXAGON HEAD SCREWS & M8 SPRING LOCK WASHERS & M8 WASHERS IN PLACE
- TIGHTEN ALL CROSSBAR BOLTS USING THE 10 mm WRENCH
- NOTE- DO NOT OVERTIGHTEN! IF YOU ARE CONCERNED ABOUT THE BOLTS BACKING OUT, YOU CAN PUT A DAB OF BLUE LOCTITE ON THE BOLTS BEFORE TIGHTENING DOWN COMPLETELY.
- NOW TIGHTEN SIDE RAILS TO ROOF RAIL USING THE 17 mm WRENCH
- GET THERE WITH WHITE TOP ADVENTURES
- info@whitetopadventures.com
Documents / Resources
|
WHITE TOP ADVENTURES SPRR170-J Sprinter 170 High Roof Strata Roof
Rack
[pdf] Installation Guide
SPRR170-J, SPRR370-J, SPRR170-J Sprinter 170 High Roof Strata Roof Rack,
Sprinter 170 High Roof Strata Roof Rack, High Roof Strata Roof Rack, Roof
Strata Roof Rack, Strata Roof Rack, Roof Rack, Rack
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>