Granite Factory Direct W2442GD-E Wall Cabinet Instruction Manual
- June 1, 2024
- Granite Factory Direct
Table of Contents
Granite Factory Direct W2442GD-E Wall Cabinet
Product Information
Specifications
- Model: W2442GD-E, W2742GD-E (Glass Not Included)
- Parts Included: A1, A2, B, C, D, J, K, L
- Hardware Contents: CC Soft-close hinge x 6, EE Corner brace x 14, FF Adjustable shelf clip x 12, GG 1 Flat head Phillips screw x 6, HH Rubber bumper x 4
- Tools Required (Not Included): Screwdriver
Product Usage Instructions
Caution
- Be sure to carefully remove all parts from the carton and ensure that there are no damages to any of them.
- The hardware should be kept away from children when unpacking and assembling this product.
- Two adults are recommended for assembly.
Assembly Overview
- Begin by attaching side panels A1 and A2 using 1/2 round head Phillips screws.
- Attach the back panel C to the side panels using 1/2 round head Phillips screws.
- Install the bottom panel B using 1/2 round head Phillips screws.
- Attach the face frame D to the assembled structure using 1 flat-head Phillips screw.
- Proceed to install the adjustable shelf K with adjustable shelf clips FF.
- Mount the top panel L using 1/2 round head Phillips screws.
- Complete assembly by attaching the door panel J with soft-close hinges CC.
Installation Tips
- Do not tighten all screws until all adjacent parts are properly connected.
- Keep extra screws for any future adjustments or replacements.
- Refer to the actual product for precise screw hole positions.
Frequently Asked Questions (FAQ)
Q: What should I do if the door is not level after installation?
A: You can adjust the door level by turning the hinge screw clockwise to extend or counterclockwise to shorten the hinge.
Q: Can I get replacement parts if needed?
A: For replacement parts or any assistance, please contact the customer service team at the retailer where you purchased the product.
Q: How many people are recommended for assembly?
A: Two adults are recommended for assembling this product for safety and ease of installation.
Glass Is Not Included
| PART | DESCRIPTION |
|---|---|
| A1 | Box side panel – left |
| A2 | Box side panel – right |
| B | Box bottom panel |
| C | Box back panel |
| PART | DESCRIPTION |
| --- | --- |
| D | Face frame |
| J | Door panel |
| K | Adjustable Shelf |
| L | Box top panel |
CAUTION
- Be sure to carefully remove all parts from the carton and ensure that there are no damages to any of them.
- The hardware should be kept away from children when unpacking and assembling this product. Two adults are recommended for assembly.
- Follow the instructions in the instruction manual carefully and strictly to ensure that the product is assembled and operates as intended.
- Do not tighten all the screws until all the adjacent parts have been properly connected. Please do not throw away extra screws. Please refer to the actual product for the screw hole position.
HARDWARE CONTENTS
- CC Soft-close hinge x 6 Be careful about the length of the screws.
- EE Corner brace x 14
- FF Adjustable shelf clip x 12
- GG 1” Flat head Phillips screw x 6
- HH Rubber bumper x 4
TOOLS REQUIRED
(NOT INCLUDED)
INSTALLATION OVERVIEW
- Use 1/2” round head phillips screw x 10
- Use 1/2” round head phillips screw x 10
- Use 1/2” round head phillips screw x 12
- Use 1/2” round head phillips screw x 12
- 1” Flat head Phillips screw x 6
- Use 1/2” round head phillips screw x 14
- Use 1/2” round head phillips screw x 2
- Adjustable shelf clip x 12
- Use 1/2” flat head phillips screw x 6
- 3/4” Round Head Phillips Screw x 6 Some products may have hinges pre-installed.
- If the door is not level when it is installed, the customer will need to turn the screw clockwise to extend the hinge or counterclockwise to shorten the hinge.
GLASSDOOR CUTOUT SPECIFICATIONS
- Height Configuration: Door Height* – (2 x Door Style Rail Width) + 1½”
- Width Configuration: Door Width* – (2 x Door Style Stile Width) + 1½”
Door Style/Rail Width/Stile Width
| Shaker | 2 ¾” | 2 ¾” |
|---|---|---|
| Traditional | 3″ | 3″ |
| Cameo | 3″ | 3″ |
- Door height and width information is located in the Specification Manual.
- DISCLAIMER: This formula is to be used as an estimation tool only.We recommend that physical measurements are taken before ordering your inserts.
- We cannot guarantee the exact dimensions determined when using the formula provided.
Dear customers,
- Thank you for purchasing our product. If you require assistance, please contact the customer service team at the retailer where you purchased the product.
- The customer service team will be happy to assist you.
Read User Manual Online (PDF format)
Loading......