BALKENE 64010 Costa Rica Lounge Chair Installation Guide
- June 1, 2024
- BALKENE
Table of Contents
BALKENE 64010 Costa Rica Lounge Chair
Specifications:
- Product Name: Costa Rica Lounge Chair
- Item Number: 64010
Product Information
The Costa Rica Lounge Chair is a stylish and comfortable chair designed for relaxation. It features Mortise and Tenon Joints for sturdy construction and durability. The chair is made of high-quality wood and comes with woven sections for added comfort.
Product Usage Instructions
Assembly Preparation:
Before starting the assembly process, ensure all parts are present. Lay out
all components on a soft, level surface. Estimated assembly time is
approximately 20 minutes. Avoid over-tightening hardware to prevent damage to
the wood.
Assembly Steps:
- Attach Backrest: Insert the tenon at the bottom of each side of the Backrest into the corresponding mortise behind the woven section of the Seat. Secure with Screws (7x90x15) using a Hex Wrench 5.
- Install Support Brackets: Attach Support
Brackets to the back of each joint where the Backrest meets the Seat using Screws (4×20). Secure the pre-installed brackets on the front of each Backrest side rail to the top of the Seat side rail.
Make sure all hardware is securely installed before using the chair.
FAQ :
-
Q: What tools are needed for assembly?
A: You will need a Philips-head screwdriver with a medium blade for assembly. -
Q: What should I be cautious about during assembly?
A: Avoid over-tightening hardware as it may cause stress or cracking in the wood. Ensure all screws and bolts are inserted straight to prevent stripping threads.
Costa Rica Lounge Chair
Item#: 64010
- ATTACH YOUR RECEIPT HERE
- Keep a copy of your proof of purchase or order confirmation which will be needed if you need to contact us about warranty coverage.
- Purchase Date:
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
-
Questions, problems, missing parts?
Before returning to your retailer, our Florida-based Customer Service team is available. -
Call toll-free 866-985-7877 9 a.m. – 9 p.m., EST
-
Email [email protected]
-
Live chat www.balkenehome.com
-
9 a.m. – 6 p.m., EST, Mon-Fri
INFORMATION
- BEFORE YOU BEGIN
Before beginning assembly, make sure all parts are present. Compare parts received with the “Parts List.” If any part is missing or damaged, do NOT attempt to assemble the product. Please read and understand this entire manual before attempting to assemble, operate or install this product. If you have any questions regarding the product, please contact Customer Service.
GENERAL INFORMATION
- Your new chair is made from the finest materials available. It should provide many years of enjoyment with minimal care. This chair is intended for outdoor use but as with all wood products, it will age faster with exposure to the weather and sun.
- For best results, keep your chair clean and dry. Clean with a soft, damp cloth. If you use furniture covers, always make sure the chair is clean and completely dry before covering, as mold may form in dark, wet places. Between uses and when seasonally out of use, store this chair in a dry, temperature controlled place to prolong its useful lifespan. Check the hinges on your chair regularly to make sure they are secure.
- To avoid damaging the chair, do not drag when moving.
- The weight limit for this chair is 300 LB/135 KG.
SAFETY INFORMATION
- WARNING DO NOT stand or allow children to stand on this chair. Make sure connectors are securely in place. Perform periodic checks to make sure the connectors are secure and adjust if needed.
- CAUTION READ all instructions before beginning assembly. Failure to do so may result in faulty assembly and potential injury. Assemble the item on a soft, non-abrasive surface such as carpet or cardboard to avoid damaging the item.
PARTS LIST
| PART | DESCRIPTION | QUANTITY |
|---|---|---|
| a | Backrest | 1 |
| b | Seat | 1 |
| c | Front Legs | 1 |
HARDWARE CONTENTS
-
NOTE: Assembly of this item involves Mortise and Tenon Joints. A Mortise is a notch or hole in a piece of wood designed to receive a Tenon of corresponding dimensions. WARNING: Assemble in a clear area on a spacious, nonabrasive surface such as a carpet or blanket.
-
Do NOT over-tighten hardware, or you risk stressing or cracking the wood.
TIP: As you proceed through assembly, be sure to insert each Screw/Bolt STRAIGHT into the receiving hardware or threaded hole. Insertion at an angle can strip the threads and prevent secure connections -
Do NOT fully tighten any hardware connection until the entire chair is assembled. Then, go back and fully tighten each bolt.
ASSEMBLY
PREPARATION
Before beginning assembly, be sure to empty contents of carton and make
sure all parts are present. If any parts are missing, please contact Customer
Service. Place all parts on a soft, level surface for assembly.
Estimated Assembly Time: 2 0 Minutes DO NOT over-tighten hardware! Over-
tightening hardware can cause wood to crack.
- Attach Backrest A: insert the tenon at the bottom of 1 each side of Backrest into the corresponding mortise drilled behind the woven section of the Seat B as shown. Insert a Screw through the hole drilled in the inside of the curve of the Seat and finger-tighten into the Backrest. Repeat to join the other side. Fully-tighten both Screws using the Hex Wrench 5
- Hardware Used: Screw (7x90x15) x2
-
- Install Front Legs C: align the brackets at the top of each leg with the holes drilled in the inside of the Seat side rails. Insert and gently tighten 2 Bolts @ per leg to secure each bracket to the corresponding side rail. Once all 4 Bolts are inserted, securely tighten using the Hex Wrench
- Hardware Used: 2 Bolt (6x35x13) x4
- Install Support Brackets 4: attach Support Brackets to the back of each joint where the Backrest meets the Seat using 4 Screws 3 per Bracket. Insert 2 Screws 3 to secure the pre-installed bracket on the front of each Backrest side rail to the top of the Seat side rail. Gently tighten all bracket Screws with a Philips-head screwdriver, being careful not to over-tighten.
- Hardware Used:
- 3 Screw (4×20) x12
- 4 Support Bracket x2
Check that all hardware is securely installed. Your Costa Rica Chair is ready for use!
LIMITED WARRANTY
Customers in the Contiguous US
- With proof of purchase from an authorized retailer, this product is warranted for a period of 1 year from original purchase date against defects in materials and workmanship under normal use. This warranty does NOT cover normal wear/weathering, exposure lo water, freezing temperatures, oils, fluids, or chemicals OR use in a commercial context if the unit is not designated as a commercial model. At Well Traveled Living’s sole discretion, products under warranty will be repaired and/or replaced at no charge to the customer. Returns sent back to Well Traveled Living must be sent via prepaid freight in the original retail packaging.
- For warranty service, contact Balkene Home/Well Traveled Living at the address, phone numbers or website and email listed in this owner’s manual. Be sure to have your sales receipt, date of purchase and catalogue/model numbers available when calling. All warranty service will be coordinated by Well Traveled Living’s Amelia Island, Florida service center. This warranty is extended only to the original owner. Proof of purchase will be required before warranty service is rendered. The sales receipt is the only valid proof of purchase. This warranty only covers failures due to defects in materials or workmanship which occur during normal use. Failures and/or damage which result from accident, negligence, misuse, abuse, neglect, mishandling. alteration or modification, failure to maintain, improper assembly or maintenance, service by unauthorized agency or use of unauthorized components or damage that is attributable to acts of God are NOT covered
- This limited warranty gives you specific legal rights and you may also have other rights which vary from jurisdiction to jurisdiction. The provisions of the United Nations Convention on Contracts for the Sales of Goods shall not apply to this limited warranty or the sale of products covered by this limited warranty.
- THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED.
- PURCHASER ASSUMES ALL RISKS IN THE ASSEMBLY AND OPERATION OF THIS UNIT.
- FAILURE TO FOLLOW WARNINGS AND OPERATIONAL INSTRUCTIONS CONTAINED IN THIS MANUAL CAN RESULT IN SEVERE PROPERTY DAMAGE AND/OR PERSONAL INJURY.
- IN NO EVENT WILL WELL TRAVELED LIVING, OR ITS DIRECTORS, OFFICERS OR AGENTS BE LIABLE TO THE PURCHASER OR ANY THIRD PARTY, WHETHER IN CONTRACT, IN TORT, OR ON ANY OTHER BASIS, FOR ANY INDIRECT, SPECIAL, PUNITIVE, EXEMPLARY, CONSEQUENTIAL, OR INCIDENTAL LOSS, COST, OR DAMAGE ARISING OUT OF OR IN CONNECTION WITH THE SALE, MAINTENANCE, USE, OR INABILITY TO USE THE PRODUCT, EVEN IF WELL TRAVELED LIVING OR ITS DIRECTORS, OFFICERS OR AGENTS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES. COSTS OR DAMAGES, OR IF SUCH LOSSES, COSTS, OR DAMAGES ARE FORESEEABLE. IN NO EVENT WILL WELL TRAVELED LIVING, OR ITS OFFICERS, DIRECTORS, OR AGENTS BE LIABLE FOR ANY DIRECT LOSSES, COSTS OR DAMAGES THAT EXCEED THE PURCHASE PRICE OF THE PRODUCT.
- SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO THE PURCHASER.
EXTEND YOUR WARRANTY
When you purchase a Fire Sense or Balkene Home product from any authorized
retailer, you’ll have peace of mind in knowing that it comes with a one-year
warranty. Extend your warranty for an additional year when you review your
item at balkenehome.com within 365 days of purchase.
Important Notice Do NOT return to place of purchase-for customer service and warranty issues:
- Call toll-free 866-985-7877 9 a.m. – 9 p.m., EST
- Email [email protected]
- Live chat www.balkenehome.com
- 9 a.m. – 6 p.m., EST, Mon-Fri
- Distributed by : Well Traveled Living 716 5 8th Street, Amelia Island, FL 32034
Fire Sense.” Patio Sense,” Avalon Home,” Mojave Sun” Vulcan, Balkene Home® and Well Traveled Living® are registered trademarks of Well Traveled Imports, Inc. All assembly instruction presentations are the property of Well Traveled Imports, Inc.” and are protected by U.S. copyrights and trademarks. All rights reserved