YISCAA KISRAIS Tub Filler Faucet with Handheld Shower Head User Manual
- June 1, 2024
- YISCAA
Table of Contents
User Manual
Pls Contact Us for More Options
BEFORE INSTALLATION
DESCRIPTION
- Solid brass construction
- Premium finish resist corrosion and tarnishing
- Feature a traditional round spout
- 60″(1500mm)rubber hose included
- Suitable for wall mounted rough-in installation
CARTRIDGE
- Ceramic disk cartridge
STANDARDS
- Certified to CUPC
- Comply with ASME A112.18.1/CSA B125.1
- ADA for lever handle
WARRANTY
- Lifetime limited warranty against leaks, drips and finish defects from the original date of purchase. (Improper care and cleaning will void the warranty)
- 5-year warranty if used in commercial installations
Specifications
Wall Mounted Bathtub Faucet
NOTE: THIS FAUCET IS DESIGNED FOR WALL MOUNTED ROUGH-IN INSTALLATION
- Check the package and confirm all parts are included. If any part is missing or damaged, please contact us.
- Do not disassemble the main body, as it has been installed & commissioned correctly & preciselybeforeleaving the factory.
- Shut off the main water supply prior to beginning installation.
- Do flush the water supply lines to remove any dirt and debris before installation (IMPORTANT).
- Make sure to connect the cold/hot inlet pipe correctly. If standing in front, connect hot water pipe to to the left and cold water pipe to the right.
- After the installation, check for leaks and make sure every joint is safely sealed.
INSTALLATION STEPS
This product has been inspected and debugged by the factory to the best condition. Please do not disassemble and assemble it yourself.
Before installing the product, please be sure to remove sundries and sludge from the water pipe to prevent sundries from blocking the product.
Helpful Information Tools:
Gather the necessary tools as shown below to complete the installation of this
Wall Mount Tub Faucet
You Will Need
Read all instructions before
installation
Tum off hot and cold water supplies at angle stops before installing Wall
Mount Tub Faucet.
STEP 1
Fix the shower valve(A) into the the wal. Use a level to ensure that the valve
is straight and leve.
Notice: The installation depth of main body should be no less than (55mm) and
nomore than (65mm).including the thickness of tile. Otherwise the handle
cupcannot be installed.
STEP 2
Wrap Teflon tape around the pipe threads, then connect hot and cold water
supply lines and in-wall pipes(not included) as desired to the valve. Turn on
water supply and open the cartridge to check for leakage. Then, put on the
protective cover.
STEP 3
Remove the protective cover when the finished wall is completed and install
the escutcheon(B) to the valve(A) and press it against the finished wall.
Then, install the handle(C) and diverter knob(D), tighten set screws(E) with
Allen key(F), and put on the indication buttons(G).
STEP 4
Turn the water on for 1 minute to flush any debris. Apply Teflon tape(H) to
the threaded tail pipe and install the tub spout(l) into the outlet on the
wall.
STEP 5
Apply Teflon tape(H) to the threaded end, the fix the cover plate(J) onto the
wall supply holder(K) and screw the wall supply holder(K) into the hand shower
outlet.
STEP 6
Add rubber washers(L) at both ends of the shower hose(M). Connect shower
hose(M) to the wall supply holder(K) and hand shower(N). Then, place the hand
shower(N) to the wall supply holder(K).
INSTALLATION DIMENSION
CLEANING CARE
In order to keep the appearance of Wall Mount Tub Faucet clean, bright and good performance, please take care of the Wall Mount Tub Faucet as follows;
- Rinse with water only and dry with soff cotton cloth;
- Use mild liquid and colorless glass cleaner to remove surface dirt and scale fim, or use polish without abrasive effect;
- Do not use abrasive deterfgent, polish, emery cloth, paper towel or scraper, etc.;
- Do not use acid cleaner, or cleaner and soap with insoluble gran etc.;
- In the process of use, mud my accumulate in the bubbler and make the water flow show, The bubbler can be unscrewed,rinsed with water, and then installed back in place.
Pls feel free to contact us if you have any questions. We will solve this in time with this email of vanbus@163.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>