GEWISS I-CON Premium Joinon Wallbox Vehicle Charging User Guide
- June 1, 2024
- GEWiSS
Table of Contents
GEWISS I-CON Premium Joinon Wallbox Vehicle Charging
Installation Steps
- Begin by scanning the QR code with a smart device to access the full installation manual or additional online resources.
- Open the Wallbox by releasing the front cover to access the internal terminals for wiring.
- Gather the necessary installation tools, including a screwdriver and other relevant equipment.
- Securely mount the Wallbox onto the wall using screws and anchors suitable for the wall material.
- Connect the power supply cables to the corresponding terminals inside the Wallbox, following the wiring diagrams.
- After wiring, close the front cover of the Wallbox and secure it.
It is important to follow all safety instructions and local regulations during installation and to consult a professional electrician if needed.
This document provides a step-by-step visual guide for the quick installation of the JOINON WALLBOX I-CON PREMIUM.
Wiring Diagrams and Terminal Connections
Refer to the wiring diagrams to connect the power supply cables to the
designated terminals:
- DLM: Demand Load Management connection (if applicable)
- L1, L2, L3, N, PE: Connect the corresponding power supply cables to these terminals
Specifications
| Attribute | Detail |
|---|---|
| Model | JOINON WALLBOX I-CON PREMIUM |
| Code | 7.55.4.645.7 |
| Last Revision | 04/2024 |
FAQ
Where can I find more information or help with installation?
Scan the QR code provided in the installation guide to access additional resources or contact support.
How do I open the Wallbox to access the internal components?
Open the front cover by unlocking it, usually located at the top or bottom of the Wallbox unit.
What should I do before connecting the power supply cables?
Ensure that the Wallbox is securely mounted and that the power supply is off before connecting the cables.
How do I know where to connect the power supply cables?
Refer to the wiring diagrams provided in the installation guide, which detail the terminal connections for L1, L2, L3, N, and PE.