Heights Telecom HT580 XGSPON Gateway Installation Guide
- June 1, 2024
- Heights Telecom
Table of Contents
Heights Telecom HT580 XGSPON Gateway Installation Guide
Cutting-edge WiFi 6E (AX) router, engineered for a powerful and seamless online experience with support for speeds of up to 10G, setting a new standard for connectivity. With its advanced technology and high-quality components, this router ensures lightning-fast speeds and incredibly low latency, guaranteeing that all your online activities, from streaming to gaming, are smooth and uninterrupted. Say goodbye to buffering and lag, and embrace a top- tier surfing experience with quality WiFi 6E (AX) router
-
XGSPON Access
-
10G LAN Port
-
IG LAN Ports
-
WiFi 6E AX
-
FxS
Package Contents:
-
Router HT-580AET
-
Power Adapter
-
LAN Cable
-
Phone Cable
-
Quick Installation Guide
LED Indicators:
-
Not connected to the Internet
-
Connected to the Internet with WiFi OFF
-
Router Booting Up
-
Connected to the Internet
Connect the Hardware
- Place your HT-580AXT router.
- Remove the black XGSPON port cover and connect the fiber cable to the XGSPON port on the router.
- Route the fiber cable through the designated fiber cable input slot.
- Connect the supplied power adapter to the router and a power outlet.
- Turn on the router by pressing the power button and wait approximately one minute until the router finishes the initial startup.
- Download the HomePass by Plume app and launch it. Follow the instructions in the app. In the app, you will be able to manage your wireless home network, including configuring the name and password of your Wireless Network (SSID), and enjoy cyber protection and much more.
Back Panel
FCC Regulations:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This device has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiated
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Note:
Caution: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
FCC regulations restrict the operation of this device to indoor use only.
The operation of this device is prohibited on oil platforms, cars, trains,
boats, and aircraft, except that operation of this device is permitted in
large aircraft while flying above 10,000feet. Operation of transmitters in the
5.925-7.125 GHz band is prohibited for control of or communications with
unmanned aircraft systems
Exposure Information
This device meets the government’s requirements for exposure to radio waves.
This device is designed and manufactured not to exceed the emission limits for
exposure to radio frequency (RF) energy set by the Federal Communications
Commission of the U.S. Government.
This device complies with FCC radiation exposure limits set forth for an
uncontrolled environment. In order to avoid the possibility of exceeding the
FCC radio frequency exposure limits, human proximity to the antenna shall not
be less than 20 cm during normal operation.
TOL±DIM| | | | | 
| CUSTOMER:Heights| |
---|---|---|---|---|---|---|---|---
‘1` & w r3 tt SHENZHEN GONGJIN ELECTRONICS CO., LTD.|
RANGE0-66-3030-80 80-180 180-315 315-500 500-800| Cl
0.10.2
0.250.3
0.50.7
0.9| C2
0.10.3 0.5 0.8 1.3 1.5 1.8| C3
0.15OA 0.9 1.2 1.8 2.5 3| C4
0.20.51.21.5345
TITLE:QUICK INSTALLATION GUIDE| MODEL:HT-580AXT US| PART NO:610000013576|
UNITS| mm| VER:| V01| DRAW| 73–R 5;4| I DATE: 240120|
MAT’L| /| SCALE| N/A| CHECK| fX OP|
FINISH| /| SHEET| 1/1| PDE| N/AA r
” 1Anne-h-,,.|
ANG.TOL±| 0°-3010.1°| 1 30°-60*/0.3°| I60°-900.5°
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>