TOTTE YHR1203-A Reverse Osmosis Water Purifier Instruction Manual

**TOTTE YHR1203-A Reverse Osmosis Water Purifier Instruction Manual

**

Please read the instruction manual carefully before use and keep it handy for future reference.

Note:
The appliance may only be installed and operated in accordance with these instructions for use. We reserve the right to make the technological, functional and appearance modifications, so as to improve the functions and performances of our products.

Product Introduce

Product Name: Reverse Osmosis Water Purifier

Parts List

• Main Body

• User Manual

• Extractor

• Cup Holder

• Cup Base

• Waste Water Clamp

Attention! (The parts will be slightly different for different product models)

Suitable water source: Municipal tap water
Suitable water pressure: ≤ 0.3MPa.

Power Supply Precautions

1. Connect this appliance to a power socket with a ground wire. Do not use one socket for multiple appliances.
2. The voltage must be consistent with the information on the product. It’s recommended to use a voltage stabilizer in the areas with unstable voltage.
3. Improper operation will void the warranty and cause a safety hazard.
4. In order to prevent fire, electric shock or personal injury, do not immerse the power cord, plug or this appliance in water; the current of its socket must be greater than 10A; otherwise it may cause overheating or fire accident.
5. Never touch the power plug with wet hands. Frequently clean the dust or water stains on the contact part of the power plug, to reduce the risk of electric shock and fire.
6. Please fix the power plug firmly on the power socket to avoid the danger of electric leakage.
7. Please use the original power cord to avoid danger.
8. When the appliance is faulty, please cut off the water source and power supply quickly, and contact our After-sales Service Center.
9. Do not bend or crush the power cord with heavy objects to avoid electric shock or disaster.
10. When the appliance is not used for a long time, please unplug the power cord.

Environment Safety

1. Do not store or expose the appliance in an environment below 0°C to prevent the pipeline from freezing and leaking.
2. The required ambient temperature should be between 4 – 38 ℃.
3. Keep the appliance away from direct sunlight, and do not use it in places with damp, low temperature or flammable substances.
4. Do not disassemble the parts on the appliance by yourself, so as to avoid damage or water leakage and other failures.
5. This appliance is suggested to be used in the areas with an altitude not higher than 1500 meters.

During operation

1. This appliance is not intended for use by persons with reduced physical sensory or mental capabilities, or lack of experience and knowledge and children, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
2. When taking hot water, do not take the hot cup body with your hands to avoid scalding.
3. Do not touch the water nozzle or extraction nozzle with any part of your body during the preparation of drinks or hot water.
4. After closing the extraction cover, do not open it during extraction process.
5. After the extraction process is complete, the indicator light turn off and the cover can be opened.
6. During the process of making tea, it is forbidden to touch or move the tea cup, to avoid damage caused by high temperature.
7. In order to maintain the normal operation of the appliance, be sure to use the accessories and consumables provided by our company.

Warning: There is a sharp metal needle in the capsule extraction cup, please do not touch it to avoid injury!

After Using Machine

1. In order to prevent children from being scalded by hot water & by misoperation, it is recommended that the appliance be in the “child lock” state or turn off the power.
2. If you do not use the appliance for a long time, the inner water must be emptied and unplug the power cord. (please refer to “Cleaning & Maintenance” pages for the emptying method). And please filter three tanks of water before using again.
3. Do not carry or move the appliance by holding the extraction part only.

Others note

1. Please drain out the inner water in the appliance before moving it.
2. Do not turn the appliance upside down, and the inclination should not exceed 45 degrees.

Product Description

First-time Use Steps

Step 1. Unpack and Place the Appliance

Connect Power Supply

Install three way valve, connect Pre-filter with PE pipe, then install pressure valve, connect to the water inlet of the machine with PE pipe.
Connect the waste outlet of the machine with PE pipe. (The arrow points in the direction of the water purifier) As below pictures:

red worme, rust, colloids, etc. from water.（replacement: 4~6 months）

After installation, open the tap water inlet valve and power on the machine.

Tap water connection mode completed.

Step 2. Forced Draining and Flushing When a new machine is started (or the filter element is replaced), it is necessary to filter and wash the filter element;After the “ ” light goes out, press and hold the “ ” button for 3 seconds to empty the water stored inside the water purifier;In this way, the circulating filter is emptied three times, and the number decreases to a lower level after purification, which can be officially activated.

Press and hold “ ” for 3 seconds for draining water

Step 3. Get Water
After cleaning, fill up the water tank again, and get purified water by clicking “ ” button after the indicator “ ” light off.

Click to get water

Step 4. Unlock & Get Water

The appliance activates the child lock by default when power on and only dispense room temp. water. Press and hold the “ ” button for 3 seconds to unlock before you activate the hot water function.

(Please press and hold the “ ” for 3 seconds to unlock after using hot water to avoid burns caused by hot water.)

**Press & hold for 3S to unlock

**

Control panel

Special Reminder:
The content of the function display varies due to different product models, and the actual function display is subject to the actual model.

2. Display water temperature (Press “-/+” buttons to adjust water temperature).
   | Display Data| 1. Display TDS of purified water (PPM) after filtration. 2. It flashes cyclically while the “limescale cleaning” is in progress.
   | Icon light| When the machine is making pure water, the icon is light on.
   | Icon light| Internal pipes cleaning reminder (When the icon is flashing, the internal pipes of the machine need to be cleaned by using the cleaning filters.)
   | Icon light| Light flashes, raw water inside water tank needs to be changed. (Not applicable for tap water connection mode.)
   | Icon light| Connect the appliance with tap water. Press and hold “-” and “+” buttons at the same time for 5S to activate tap water connection mode.
   Filter| Icon light| Automatic reminder to change the filter cartridges when the lights flash.
   UV| Icon light| UV-LED sterilization start to work when the light is on.
   Note: This picture is in full display state, the actual display of the machine is according to the selected function.

*ppm: Milligrams of soluble solids in one liter of water.

Operation of Extraction Cup

Attention!

1. Do not pour instant coffee or solid instant beverage granules to avoid blockage or overflow.
2. The extraction function can only be selected after unlocking the appliance.

Cleaning
Place the cup under the right nozzle and press “Coffee” key to preheat the cup and clean the inner pipe.

Preparation
Press the cover button, take out the extraction cup and unscrew the extraction cup lid and remove the steel strainer.

• Press cover button

• Open cover

• Take out cup and open the cup lid

• Take out stainer

Coffee making

Insert 9g of coffee power to the stainless steel strainer (7-8mm from the cup mouth); Place the strainer in the cup holder and close the cup lid.

(Grind size of the coffee powder is according to personal preference. Fine grinding: strong taste. Coarse grinding: lighter taste.)

• Add coffee

• Fix into cup holder

• Close cup lid

• End

Tea making

Put the loose tea into the stainless steel strainer. Place the strainer in the cup holder and close the cup lid.

(The tea should not exceed the top of the cup. Large pieces of tea should be crushed properly to make it easier to elicit the tea taste. )

• Add tea

• Fix into cup holder

• Close cup lid

• End

Extraction preparation

Place the extraction cup in the extraction holder and close the main cover.

Warning!
notice the tip tube inside the extraction cup.

Place extraction cup

close cover **

**

Operation of Extraction Cup

Extraction
Place a cup or vessel under the right nozzle and click the extraction button (the water temperature can be selected by clicking “ -/+ ” button), then click the corresponding button to start. Only take away the cup or vessel after the extraction light is off.

1. Coffee: Default temperature & volume is 95°C & 140ml;
2. Capsule: Default temperature & volume is 95°C & 180ml;
3. Oolong tea: Default temperature & volume is 93°C & 200ml;
4. Black Tea: Default temperature & volume is 95°C & 200ml;

Attention

1. DO NOT open the extraction cover during the extraction process to avoid high temperature burns.
2. The tea can be extracted repeatedly

Cleaning
Please always clean the extraction cup after use. Steps as shown below:
(Be careful of high temperature burns when removing the extraction cup. )

• Press the cover button.

• Open cover.

• Take out Cup and open cup lid.
  

• Dispose residue.
  (Be careful of burns when removing the stainless steel cup.)

Friendly Reminders:

1. When take out the stainless steel strainer cup, hold the seal ring of the cup to avoid high temperature burns.
2. Please clean the extraction cup with clean water before and after use.
3. If the stainless steel strainer cup is clogged or hard to clean, it is recommended to replace it. (Please contact After-sales Service for purchase)

Operation of Filter Replacement

Filter Replacement Notice

1. Expiration reminder:
   When the lifetime of the filter cartridge reaches the expiration date, the corresponding indicators will flash automatically

2. Filter Replacement Steps:

3. Unplug the power supply and remove the raw water tank.
   

4. Rotate the old filters clockwise to take out.

5. Insert the new filters cartridge and rotate it counterclockwise to the locking position.
   

6. Filter Reset (The life calculation cycle returns to the original state after replacement.)
   Please reset the filter cartridge lifetime, otherwise the indicator light will keep flashing.

   • Reset reminder

   • Press and hold “Filter Reset” button for 5S

   • Reset completed

Note: If the RO filter ③ is replaced, a cleaning process with 3 tanks of water must be performed.

4. Filter reset in advance
   If you need to replace filter in advance, the filter reset indicator is as follows:

Operation Method:

• Press & Hold for 5s

• Select
  

• Hold for 3s

Note: If the RO filter 3 is replaced, a cleaning must be performed.

Functions operation guide

Friendly reminder:
The design form of these function icons are subject to the real object!

Child lock setting

The appliance activates the child lock by default when power on, you can only get room temperature water, not hot water (hot water and tea & coffee functions).
To unlock:
Press & hold “ ” button for 3 seconds, the indicator light off.
To lock:
Press & hold “ ” button for 3 seconds, the indicator light on.

Press & hold for 3S

Water selection

After unlock the Child Lock, you can select “Warm” “Warm” “Hot” water by clicking the corresponding button, and then click the button “ ” to get water.

(The water temperature can be selected by clicking “-/+”button.)

Warm: 40~70℃ / 104℉-158℉
Hot: 70~85℃ / 158℉-185℉

Water capacity selection

Large Cup: ≈ 550ml
Small Cup: ≈ 150ml
Click to select the cup volume, then click the button “ ” to get water.

(Note: There could be a volume deviation of ±10%. The actual water temperature and volume depends on the using environment and local tap water quality.)

Operation guide for tea & coffee extraction

Operation of capsule extraction

1. Place the capsule into the capsule extraction cup.
2. Press firmly on the edge of the capsule, ensure the needle spike the bottom of the capsule successfully.
3. Put the extraction cup into the extraction holder and close the cover.
4. Click the capsule button “ ” and wait for the extracted beverage.

Warning:

• A sharp metal needle tube located at the bottom of the extraction cup. DO NOT touch it to avoid stabbing!
• Please clean the cup with clean water before and after use.

Control Panel Functions

Warning!

1. Do not pour instant coffee or solid instant beverage granules to avoid blockage or overflow.
2. The extraction function can only be selected after unlocking the appliance.

Coffee:
Default temperature & volume: 85℃ & 140ml; Put the extraction cup with coffee powder into the extraction holder, then click the Coffee button to start.
**(Grind size of the coffee powder is according to personal preference. Fine grinding: strong taste. Coarse grinding: lighter taste.)

**

Capsules:
Default temperature & volume: 85℃ & 180ml; Put the capsule into the capsule cup, then put it into the extraction holder, then click the Capsule button “ ” to start.

Oolong tea:
Default temperature & volume: 85℃ & 200ml; Put the extraction cup with loose Oolong tea into the extraction holder, then click the Oolong Tea button to start.

Black tea:
Default temperature & volume: 85℃ & 200ml; Put the extraction cup with loose black tea into the extraction holder, then click the Black Tea button to start.

Warning!
DO NOT open the extraction cover during the extraction process to avoid high temperature burns.

Product Specifications information

Trouble Shooting
When you run into any problem during operation, the appliance will stop working.
Power on the appliance again to resume work after troubleshooting.
It ‘s recommend to turn off the power and unplug the power cord for 10 seconds when a fault code appears. Insert the power cord and turn on the appliance again. If the problems still persist, please contact our After-sales Service Center.

Product Specifications

Filter Introduction

large impurities, bleaching powder, odor, organics.
2| Composite activated carbon filter| Composite activated carbon filtration removes chlorine, humus, disinfection, toner ,organics ,reduces heavy metal.
3| RO membrane| RO membrane filtration accuracy can reach to 0.0001 MICRONS. It’s able to efficiently remove various bacteria, viruses, heavy metals, antibiotics, pesticide residues and other harmful substances in the water.

Quick troubleshooting guide

the water pressure
The filter cartridge is blocked| Change filter
Problem with pressure regulation or pumping in the appliance| Contact technical service
Not connected to the power supply| Connect the appliance to the power supply
Not enough water dispensed.| The filter cartridge is blocked| Change filter
Insufficient incoming water pressure| Check and increase the incoming water pressure if necessary
Hot water is not dispensed.| May be caused by various problems| Contact technical service
Water leaks| The water pipes are faulty| Turn off the water supply, disconnect the appliance from the power supply, contact technical service.

IN THE END

if you encounter any problems, please kindly contact us by the below email in time so we can provide the best customer service to you.
Seyee-service@outlook.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>