caratec CAV242E-S LED Smart TV User Guide

June 1, 2024
caratec

caratec logo

caratec CAV242E-S LED Smart TV

caratec CAV242E-S LED Smart TV

General information

Disclaimer
Caratec GmbH makes no representations or warranties with respect to this manual and, to the extent permitted by law, limits its liability for breach of any implied warranty to the replacement of this manual with another. In addition, Caratec GmbH reserves the right to revise this publication at any time without obligation to notify anyone of such revisions.

The information provided in this documentation includes general descriptions and/or technical characteristics regarding the performance of the equipment described herein. This documentation cannot serve as a proper evaluation of the suitability or reliability of the equipment for any specific application by any user and should not be relied upon as a substitute for such evaluation. It is the responsibility of each such user or installer to perform an appropriate and complete risk assessment, evaluation and testing of the equipment with respect to their specific application. Neither Caratec GmbH nor any of its affiliates or subsidiaries shall be held responsible or liable for any misuse of the information contained herein.

All relevant state, regional and local safety regulations must always be observed when installing and using this device. For safety reasons and to ensure compliance with documented system data, the manufacturer alone is authorized to perform repairs on components. Failure to follow this information may result in injury or damage to the equipment.

The manufacturer assumes no liability for damage in the following cases:

  • assembly or connection errors
  • Mechanical damage to the product
  • Damage due to polarity reversal or incorrect connection voltage
  • Modifications to the product not approved by the manufacturer
  • Use for purposes not described in these instructions

Standards used in this manual
The following font styles are used in this document:

Bold

  • Names of product elements, instructions, options, programs, processes, services and tools.
  • Names of interface elements (e.g., windows, dialog boxes, buttons, fields, and menus).
  • Interface elements that the user selects, clicks, presses, or taps.

Italics

  • Other instructions or documents referenced in the text.
  • Accessories

Courier
System output, such as an error message, URLs, full paths, file names, and prompts.

Explanation of safety instructions

caratec CAV242E-S LED Smart TV 1

Storage instructions

  • Be sure to read and understand the complete instructions and all safety information before installing or using this product.
  • Retain all safety information and instructions for future reference and pass them on to subsequent users of the product.

CAUTION:
Failure to comply with these instructions may result in minor or serious injury. The manufacturer is not liable for property damage or injuries resulting from incorrect handling or failure to comply with the safety instructions. In such cases, the warranty becomes void.
A current version of this documentation is available on the following web page: www.caratec.de

Product description

The Smart TVs CAV222E-S, CAV242E-S, CAV272E-S and CAV322E-S are designed for use in motorhome and caravans. The devices are is easily operated via voice or Magic Remote. Thanks to the integrated webOS, it allows streaming of NETFLIX, Amazon Prime Video, the media libraries of ARD and ZDF as well as many other streaming services. Of course, the smart TV is equipped with Bluetooth and the Caratec wide-angle panel. For the use of all reception options, it can be ideally combined with the WiFi/LTE caravaning routers and satellite antennas from Caratec.

Scope of delivery

  • Smart TV
  • Magic Remote incl. 2 AA batteries
  • 12V Connection cable cigarette lighter
  • Quick Start Guide
  • AV-Adapter
  • Mounting screws

Available separately:

  • Stand for CAV222E-S and CAV242E-S, part number: CAVZ104
  • Stand for CAV272E-S and CAV322E-S, part number: CAVZ105
  • 230V AC power supply (12V, 3A), for 22“ / 24“ Caratec TV part number: CAVZ102
  • 230V AC power supply (12V, 5A), for 27“ / 32“ Caratec TV part number: CAVZ103

Technical specifications

CAV222E-S


Article number| CAV222E-S
approved according to ECE R10| yes
visible diagonal screen size in cm| 55
visible diagonal screen size in inches| 21,5
Power consumption while powered on| < 15 Watts
Power consumption in standby mode| < 1 Watts
Power consumption in off-state| 0,00 Watts
Resolution (in pixels, H x V)| 1920 x 1080 (Full HD)
Aspect ratio| 16:9
Brightness| 220 cd/m²

Viewing angle (R/L/T/B )

| 89°/89°/89°/89°

(Wide angle panel)

Speakers| 2 x 5 Watts
HbbTV| yes (2.0)
DVB-T2 HD (H-265) Tuner| yes
DVB-S2 Tuner| yes
Remote control| yes (Magic Remote TM)
Stand (removable)| optional: CAVZ104
12V connection cable| yes
Power supply unit (100- 240 V), external| optional: CAVZ102
VESA mounting option 100 x 100| yes
Device switch on/off| yes
Operating voltage| 10-30V
Weight (device only)| 2,5 kg
Dimensions (W x H x D in mm) without foot| 497 x 291 x 44 mm
Ports

1x Antenna port DVB-S2
1x RJ45 (Ethernet)
2x USB port (Mediaplayer)
1x Headphone output (3,5 mm)
1x Antenna port analog/DVB-T2
3x HDMI (CEC,ARC)
1x CI+-Slot
1x AV-IN (MINI)
1x Optical audio output

CAV242E-S

Technical specifications

Article number| CAV242E-S
approved according to ECE R10| yes
visible diagonal screen size in cm| 60
visible diagonal screen size in inches| 23,8
Power consumption while powered on| < 15 Watts
Power consumption in standby mode| < 1 Watts
Power consumption in off-state| 0,00 Watts
Resolution (in pixels, H x V)| 1920 x 1080 (Full HD)
Aspect ratio| 16:9
Brightness| 220 cd/m²


Viewing angle (R/L/T/B )

| 89°/89°/89°/89°

(Wide angle panel)

Speakers| 2 x 5 Watts
HbbTV| yes (2.0)
DVB-T2 HD (H-265) Tuner| yes
DVB-S2 Tuner| yes
Remote control| yes (Magic Remote TM)
Stand (removable)| optional: CAVZ104
12V connection cable| yes
Power supply unit (100- 240 V), external| optional: CAVZ102
VESA mounting option 100 x 100| yes
Device switch on/off| yes
Operating voltage| 10-30V
Weight (device only)| 2,8 kg
Dimensions (W x H x D in mm) without foot| 542 x 319 x 44 mm
Ports

1x Antenna port DVB-S2
1x RJ45 (Ethernet)
2x USB port (Mediaplayer)
1x Headphone output (3,5 mm)
1x Antenna port analog/DVB-T2
3x HDMI (CEC,ARC)
1x CI+-Slot
1x AV-IN (MINI)
1x Optical audio output

CAV272E-S

Article number CAV272E-S
approved according to ECE R10 yes
visible diagonal screen size in cm 69
visible diagonal screen size in inches 27
Power consumption while powered on < 21 Watts
Power consumption in standby mode 0,50 Watts
Power consumption in off-state < 1 Watts
Resolution (in pixels, H x V) 1920 x 1080 (Full HD)
Aspect ratio 16:9
Brightness 220 cd/m²

Viewing angle (R/L/T/B )

| 89°/89°/89°/89°

(Wide angle panel)

Speakers| 2 x 8 Watts
HbbTV| yes (2.0)
DVB-T2 HD (H-265) Tuner| yes
DVB-S2 Tuner| yes
Remote control| yes (Magic Remote TM)
Stand (removable)| optional: CAVZ105
12V connection cable| yes
Power supply unit (100- 240 V), external| optional: CAVZ103
VESA mounting option 100 x 100| yes
Device switch on/off| yes
Operating voltage| 10-30V
Weight (device only)| 3,8 kg
Dimensions (W x H x D in mm) without foot| 617 x 362 x 45 mm
Ports

1x Antenna port DVB-S2
1x RJ45 (Ethernet)
2x USB port (Mediaplayer)
1x Headphone output (3,5 mm)
1x Antenna port analog/DVB-T2
3x HDMI (CEC,ARC)
1x CI+-Slot
1x AV-IN (MINI)
1x Optical audio output

CAV322E-S

Article number CAV322E-S
approved according to ECE R10 yes
visible diagonal screen size in cm 80
visible diagonal screen size in inches 32
Power consumption while powered on < 27 Watts
Power consumption in standby mode < 1 Watts
Power consumption in off-state 0,00 Watts
Resolution (in pixels, H x V) 1920 x 1080 (Full HD)
Aspect ratio 16:9
Brightness 220 cd/m²

Viewing angle (R/L/T/B )

| 89°/89°/89°/89°

(Wide angle panel)

Speakers| 2 x 8 Watts
HbbTV| yes (2.0)
DVB-T2 HD (H-265) Tuner| yes
DVB-S2 Tuner| yes
Remote control| yes (Magic Remote TM)
Stand (removable)| optional: CAVZ105
12V connection cable| yes
Power supply unit (100- 240 V), external| optional: CAVZ103
VESA mounting option 100 x 100| yes
Device switch on/off| yes
Operating voltage| 10-30V
Weight (device only)| 4,6 kg
Dimensions (W x H x D in mm) without foot| 723 x 420 x 45 mm
Ports

1x Antenna port DVB-S2
1x RJ45 (Ethernet)
2x USB port (Mediaplayer)
1x Headphone output (3,5 mm)
1x Antenna port analog/DVB-T2
3x HDMI (CEC,ARC)
1x CI+-Slot
1x AV-IN (MINI)
1x Optical audio output

Safety instructions

  • The product does not contain any user-serviceable parts. Refer to the Troubleshooting and Customer Care section if the product stops functioning properly.
  • Do not operate electrical equipment in explosive atmospheres, such as where flammable liquids, gases, or dust are present. The equipment generates sparks that may ignite the dust or vapors.
  • The equipment is intended for indoor use. Never use outdoors.
  • Do not handle the product if it has fallen into water or other liquid. If the product falls into water or other liquid, unplug it immediately.
  • Do not place the device on uneven or unstable surfaces.
  • Do not expose the device to dirty or dusty environments.
  • Do not expose the device to direct sunlight or place it on heat-sensitive surfaces or near heaters, air conditioners, or combustible materials.
  • Inspect the product for damage before installation. If there is visible damage, do not install the product and contact the manufacturer.

WARNING

  • Make sure that the plug of the product and the power cord are not damaged.
  • Do not use damaged power cables, accessories or other peripherals. Contact the manufacturer if any parts are damaged.
  • Do not install near flammable materials such as curtains and drapes.
  • Never place the product where it may fall or be drawn into water or other liquids.

Caution:

  • Always be careful when handling, transporting and storing the product. Always place the product in its original packaging during transport and storage. The product contains sensitive and fragile parts. If the product is not used for a long period of time, unplug the power cord, clean the product and store it in a cool, dry place away from direct sunlight.
  • Use only the original power plug supplied with the product. Other power plugs may damage the product. Do not use the product‘s supplied power plug with other devices.
  • Do not insert the power plug into an outlet with a voltage other than that specified on the adapter.
  • To prevent the system from overheating, do not cover the air inlet openings of the device.

Intended use

This device is designed to display audiovisual content and TV signals from an antenna or cable TV network and to play video or audio content from the Internet and USB mass storage devices.

Simplified EU declaration of conformity
Hereby, Caratec GmbH declares that the radio equipment types CAV222E-S, CAV242E-S, CAV272E-S and CAV322E-S are in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: doc.caratec.de

Copyrights
The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

Mounting

Mounting the stand (sold separately)

  1. Place the screen on a soft, flat surface to avoid damage.
  2. Attach the stand to the bottom of the TV using the screws providedcaratec CAV242E-S LED Smart TV 2

Wall mounting

  1. Attach the wall bracket to the wall.
  2. To avoid damage, place the screen on a soft, flat surface. surface.
  3. Remove the stand if necessary.
  4. Attach the TV to the wall mount using the VESA mount

Caution:

  • Attention should be paid that the fixing screws (M6) do not protrude more than 8 mm into the TV. Longer screws may damage the device.

  • A wall mount bracket can be purchased separately. For product information, visit www.caratec.de.
    Only use a wall mount that is suitable for the size and weight of the TV

  • Follow the mounting instructions of the wall mount.

Operation on the unit

Name Explanation
SOURCE Press to select the input source
MENU Press to enter the main menu
CH+ Press to jump to the next channel
CH- Press to jump to the previous channel
VOL+ Press to increase the volume
VOL- Press to decrease the volume
POWER Press to switch the device on or off

Operation via the remote control

caratec CAV242E-S LED Smart TV 4

1 Switch device on or off
2 Switch set-top box on or off
3 NUMBER KEYS: Switch directly to a channel
4 Open channel list

5

| 0 / Quickaccess:

-short press: number 0

-long press: Quickaccess

6| •••

-short press: activates the pointer of the Magic Remote(tm)

– long press: audio description on/off

7| Mute
8| Adjust volume
9| Switch Channels
10| Activate voice control
11| Main menu
12| Settings


13

| Mouse/OK

–  Mouse: Scroll and change channel

–  OK: Confirm selection

14| ARROW KEYS: Navigate the menu
15| Electronic Program Guide (EPG)
16| Return to previous menu/Exit menu
17| Open Netflix
18| Source selection
19| Open Prime Video
20| Function depending on menu display
21| Opens the Smart TV area for feature films
22| –  In TV mode: Pause live playback

–  In USB mode: Pause playback

23| –  In TV mode: live playback

–  In USB mode: Resume playback

Inserting the batteries into the remote control

1 Open the battery compartment of the remote control
2 ****

Insert the supplied batteries (2 x 1.5 volts AA)

Ports on the unit

External devices or sources can be connected to the back of the TV.

caratec CAV242E-S LED Smart TV 5

Name Explanation
DC IN Input power supply 10-30 V DC
RJ45 Network connection for the Internet connection
USB 1-2 USB inputs (5V DC max 500mA)
HDMI 1-3 HDMI inputs
OPTICAL Optical audio output
DVB-S2 Port for DVB-S (satellite TV)
DVB-C/T2 Port for DVB-T/DVB-T2 HD or cable TV
CI+ CI slot for encrypted channels (NOTE: Make sure the module is oriented

correctly)
MINI AV| AV input (adapter included)
Headphones| Port for headphones/external speakers (3.5 mm jack)

Electronic manual (further information on operation)

caratec CAV242E-S LED Smart TV 6

An electronic manual is integrated in your TV set. You will find this manual in the main menu under the item „User Guide“ after completing the initial setup. All the functions of your device are explained here in the currently selected menu language.

Servicing/maintenance

Cleaning

CAUTION: Disconnect the device from the power supply before cleaning. The product must not come into contact with water or other liquids. For cleaning, the device can be carefully wiped with a lint-free cloth.

Troubleshooting and repairs

WARNING

  • The product may only be repaired by a qualified and trained person.
  • Contact the manufacturer (see reverse side) or your specialist dealer for repair.

The device does not turn on

| Check if the power cable is plugged in correctly, Check if the on/off switch is set correctly. Check if the correct input voltage is applied.
---|---


No picture

| Check if the correct source is selected. Check if the source is connected correctly.


No sound

| Check the volume settings. Check whether the mute function is active.


Poor image quality

| Check if the antenna cable is connected correctly. Check the picture settings.


TV does not respond to the remote control

| Check whether the batteries are inserted correctly. Insert new batteries if necessary.


DVB-S/DVB-T: „no signal“

| Check the antenna connection. Start a new automatic channel search.

Disposal of electronic equipment

Meaning of the „crossed-out trash can“ symbol
The symbol on the product, accessories or packaging indicates that this device must not be disposed of as unsorted waste, but must be taken to a special collection point! Dispose of the device at a collection point for recycling and disposal of waste electrical and electronic equipment that has systems for separate collection of electrical and electronic equipment if you live within the EU and other European countries. By disposing of the equipment correctly, you will help to avoid potential hazards to the environment and health that may be caused by inappropriate handling of waste equipment. Recycling materials helps to conserve natural resources.

Separate disposal
Electrical and electronic equipment that has become waste is referred to as old equipment. Owners of old equipment must dispose of it separately from unsorted municipal waste. In particular, old appliances do not belong in household waste, but in special collection and return systems.

Batteries and rechargeable batteries
As a rule, owners of waste equipment must separate spent batteries and accumulators that are not enclosed in the waste equipment and can be removed from the waste equipment without causing damage before handing them over to a collection point. This does not apply if WEEE is prepared for reuse with the participation of a public waste management authority. The following batteries or accumulators are contained in this electrical equipment:

Battery type Chemical system
Mignon (Typ: AA or R6) Zinc-Carbon

Options for the return of old equipment(only in germany)
Owners of old appliances from private households can hand them in free of charge at the collection points of the public waste management authorities or at the take-back points set up by manufacturers or distributors as defined by the ElektroG. Stores with a sales area of at least 400 m² for electrical and electronic equipment and those grocery stores with a total sales area of at least 800 m² that offer electrical and electronic equipment several times a year or on a permanent basis and make it available on the market are subject to the take-back obligation. This also applies in the case of distribution using means of distance communication, if the storage and shipping areas for electrical and electronic equipment are at least 400 m² or the total storage and shipping areas are at least 800 m². Distributors shall generally ensure take-back by providing suitable return facilities at a reasonable distance from the respective end user.

The possibility of returning an old appliance free of charge exists for distributors who are obliged to take it back, among other things, if a new appliance of the same type, which essentially fulfills the same functions, is supplied to an end user. If a new appliance is delivered to a private household, the similar old appliance can also be handed over there for collection free of charge; this applies in the case of distribution using means of distance communication to appliances in categories 1, 2 or 4 as defined in Section 2 (1) of the Electrical and Electronic Equipment Act, namely „heat transmitters“, „display screen equipment“ or „large appliances“ (the latter with at least one external dimension exceeding 50 centimeters). End users are asked about their intention to return the equipment when they conclude a purchase contract. In addition, there is the possibility of free return at collection points of the distributors, independent of the purchase of a new device, for such old devices that are not larger than 25 centimeters in any external dimension, limited to three old devices per type of device.

Data protection notice
Old devices often contain sensitive personal data. This applies in particular to information and telecommunications technology devices such as computers and smartphones. In your own interest, please note that each end user is responsible for deleting the data on the old devices to be disposed of.

Disposal of packaging waste
The packaging is made of materials that may be disposed of at your local recycling facilities. By properly disposing of the packaging and packaging waste, you will help prevent potential hazards to the environment and public health.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals