itc 69711 Assurance/Affirm Flood Light Installation Guide
- June 1, 2024
- ITC
Table of Contents
itc 69711 Assurance/Affirm Flood Light Installation Guide
Assurance/Affirm Flood Light Part#: 69711
**IMPORTANT SAFETY INSTRUCTIONS. READ CAREFULLY FOR YOUR PROTECTION AND
SAVE ALL INSTRUCTIONS.**
- Disconnect power before installing, adding or changing any component.
- To avoid a hazard to children, account for all parts and destroy all packing
- Can be used in damp or wet
- Do not install any luminaire assembly closer than 6” from any curtain or other combustible
- Supply to be fused, 5A max
- Determine mounting location and drill ¼” hole for
- Drill pilot holes for light mounting
- Attach wires to power Red is positive and black is negative.
- Apply a generous spot of silicone (RTV) to the back of the light where the wire goes through the vehicle
- Hold light to mounting surface, insert and tighten screws until
**LEDs are polarity sensitive and will not light if not attached properly.
3030 Corporate Grove Dr. Hudsonville, MI 49426
Phone: 616. 396.1355
itc-us.com
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>