baseus PB4359Z Magnetic Mini Air Wireless Fast Charging Power Bank User Manual

: June 1, 2024
: Baseus

Table of Contents

baseus PB4359Z Magnetic Mini Air Wireless Fast Charging Power Bank
Introduction
Specifications
Content
Product Schematic Design
Product Description
FCC STATEMENT
CONTACT
Read User Manual Online (PDF format)
Download This Manual (PDF format)

baseus PB4359Z Magnetic Mini Air Wireless Fast Charging Power Bank

Introduction

Baseus Magnetic Mini Air Wireless Fast Charge Power Bank 10000mAh 20W.
Please read this user manual carefully before use and keep it for future reference.

Warnings
Improper use of the product may lead to battery malfunction or severe overheating, and may even cause fire or explosion. To avoid any damage to you and your property, please follow the instructions below when you use and store the product.

This is NOT a toy! Please place this product in areas that are not easily accessible by children. Do not allow children to operate this product, or accidents may occur.
Please charge this product with a charger approved by the local safety standards in case of danger or damage.
DO NOT apply pressure, and avoid collisions. The battery and circuit may be damaged if this product falls from a great height, experiences intense shocks, or is immersed in liquid; if so, please avoid using this product.
If this product suffers from deformation, leakage, or radical decline in performance, please stop using this product.
Please DO NOT charge any device or recharge this product in places that may affect its heat dissipation, such as pants pockets, enclosed bags, beds, or couches. Ensure this product is not under any cover when operating. When charging other devices for prolonged periods, DO NOT stack any device on top of this product, or it might affect its heat dissipation.
This product CAN NOT be disassembled, applied pressure, pierced, short-circuited, immersed in liquid, disposed of in a fire, or exposed to a high temperature or heat source with a temperature greater than 140°F(60°C).
DO NOT place this product in areas with extremely high temperatures. Such as under direct sunlight or in a vehicle with a very high interior temperature.
This product contains lithium batteries, DO NOT disassemble it! Or danger or battery damage may occur.

Attention

Please fully charge this device before using it for the first time.
The power banks have conversion efficiency, so the battery capacity of the power bank is not equal to the rechargeable capacity.
Please choose an appropriate charger for recharging this product and suitable cables when charging other devices.
Please ensure some supervision is in progress when recharging this product, DO NOT charge this product without any care.
Please remove the cable when done recharging this product or finished charging for any other device to preserve the product integrity.
If the indication does not light up after pressing the power button, please recharge this product.
Please preserve this product with a battery percentage between 25%-50% for long-term storage. Place this product in a cool and dry environment. To slow down battery aging, avoid storing this product in an empty or full charge for long-term storage.
Please do not dismantle the product by yourself. Improper use or placement may compromise the service life or damage the product, to which our company will not bear any legal responsibilities nor offer any guarantee. Please understand.

Specifications

Name: Power Bank
Model No.: PPCXM10A
Battery: Polymer Lithium Battery
Power Capacity: 10000mAh / 37Wh
Energy Conversion Rate: 75%
Type-C Input: 5V 3A; 9V 2A
Type-C Output: 5V 2.4A; 9V 2.22A; 12V 1.5A
Wireless Output: 5W/7.5W/10W/15W
Total Output: 5V 2.4A
Product Size: 109.1 X 70.4 X 18.5mm
Product Weight: About 203.7g

Content

Power Bank X1
User Manual X 1
Warranty Card X1
Charging Cable X1

Product Schematic Design

baseus-PB4359Z-Magnetic-Mini-Air-Wireless-Fast-Charging-Power-Bank-
fig-1

Product Description

This product is a portable charging device that can provide wired and wireless charging for mobile phones, tablets, game consoles and other digital products.
The product has auto-alignment for magnetic charging, and supports Apple 20W PD fast charging, Type-C dual-way fast charging, 15W wireless fast charging, etc.
It has built-in FOD, overcharge, over-discharge, temperature protection and other safety protection circuits.

Operating Environment

Operating temperature: non-tropical area, 0°C to 25 °C
Storage temperatures: 0 °C to 40 °C

Icon Description

The 5-year icon refers to the “valid environment-friendly use period”, not the product quality assurance period.
Electronic products contain toxic and harmful substances such as lead, mercury and cadmium.
The overdue use of these products may lead to leakage or mutation of these toxic and harmful substances, cause environmental pollution or serious damage to people and property.
The term “environment-friendly use period” means that all electronic products shall be used within this validity period.
We are free of any responsibility against safety issues caused by using the product beyond its safe service life.

Shenzhen Baseus Technology Co., Ltd. declares that the product complies with Directive 2014/53/EU.
The full text of the EU Declaration of Conformity is available at the following internet address: https://www.eu.baseus.com.

This symbol indicates that this product shall not be treated as household waste. Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. Follow local rules and never dispose of the product or batteries with regular household waste.

Statement on Toxic and Hazardous Substances in Electronic Information Products

baseus-PB4359Z-Magnetic-Mini-Air-Wireless-Fast-Charging-Power-Bank-
fig-3

This form is compiled under SJ/T 11364.

0: It indicates that the content of the toxic and harmful substance in all homogeneous materials of the component is below the limit specified in the GB/T 26572 standard.
X: The content of toxic and harmful substances in at least one homogeneous material of this part exceeds the limit stipulated in the GB/T 26572 standard.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions:

this device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.