Danfoss T-400-1 Portable Coll O Crimp Installation Guide
- June 1, 2024
- Danfoss
Table of Contents
Danfoss T-400-1 Portable Coll O Crimp Installation Guide
System Specifications & Equipment
T-400-1 Coll-0-Crimp® Press Specifications
Crimping Capacity: 3/16” -1-3/8” I.D. 2-wire Hose
Weight: 113 lbs
T-400 Coll-O-Crimp® Press with tooling includes one each of the following:
| T-400-1 | Coll-O-Crimp® Press |
|---|---|
| T-400-2C | Collet -1/4” |
| T-400-3C | Collet – 3/8” |
| T-400-4C | Collet -1/2” |
| T-400-5C | Collet – 3/4” |
| T-400-6C | Collet -1” |
| T-400-8 | Die Ring – 3/16” thru 1-3/8” |
| T-400-10 | Spacer Ring (black) |
| T-400-62 | Spacer Ring (yellow) |
| T-400-11 | Spacer Ring (silver) |
| T-432-15 | Pusher |
| T-400-D | Spacer Ring Decal |
| T-400-M | Instruction Kit |
| FS-1100 | Label Set/Layout Guide (‘Li SeriesHose Ends) |
The T-400 package also includes one of the hose and fitting options below. If no pump is ordered, the T-400-16 is supplied.
-
T-400-16 36” Hose assembly & fittings for use with T-401-1 and T-411 Electric Pump. **T-400-18 108” Hose assembly & fittings for use with T-402-1 Air/ Hydraulic Pump
T-400-19| 60” Hose assembly & fittings for use with T-403-1 Hand Pump.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>