IDEM Wall Mount Clock Installation Guide
- June 1, 2024
- idem
Table of Contents
IDEM Wall Mount Clock
The Wall Mount Kit Includes
-
1 rectangular Idem sticker with two gray squares
-
2 square magnets
-
2 HST-magnetic rectangular black metal plates
Wall mount Installation Guide
-
Remove the film and stick the 2 rectangular HST-magnetic black metal plates horizontally on the back of the clock. The image shows the suggested location.
-
Determine where you want to install the clock. Make sure the location is near an electrical outlet and that the wall is clean (free of dust), then stick the protective sticker on the wall at the desired height.
-
Remove the red plastic from the back of the square magnets and place them on the provided spaces on the Idem sticker on the wall. Make sure they are attached securely, so that the clock stays in place.
-
Remove the clear plastic from the two square magnets and place the clock on the magnets fixed on the wall. You can adjust the clock’s angle as needed.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>