NURSAL SM9126N TENS Unit Muscle Stimulator User Manual

NURSAL SM9126N TENS Unit Muscle Stimulator

Explore Your Adventure

• www.nursal.co/warranty
• facebook.com/nursalonline

ACTIVATE YOUR 12 MONTH WARRANTY & GET EXCLUSIVE GIFT

Register within 2 weeks after receiving your new product.

PLEASE VISIT NOW

www.nursal.co/warranty

CUSTOMER SERVICE

• support@nursal.co
• @nursalonline

NOTE

1. Avoid touching the pads when the device is turned on.
2. Do not place pads near the heart, head, or carotid.
3. Not suitable for use by pregnant women, people with implanted devices, or heart disease.
4. Apply a few drops of water if the pads are not properly adhering to skin

A Big Thank You

We’re thrilled that you have chosen to purchase the NURSAL Electronic Mini Massager. At NURSAL, we’re committed to offering products that enhance your daily life. Should you have any questions or feedback about your new product, please get in touch with our customer support team at 1-855-556-6888 or by email at support@nursal.co

Enjoy your new product!

INTRODUCTION

• Our Electronic Pulse Massager delivers electronic impulses to tired and sore muscles via its electrodes. These impulses mimic signals coming from the central nervous system to trigger muscle contractions, which can be used for a variety of purposes such as increasing endurance, complementing exercise routines, or simple relaxation.
• Our Electronic Pulse Massager is portable, compact, and stylish. It may be helpful in relieving minor aches and pains in various parts of the body such as the waist, shoulders, joints, hands, and feet. The device is especially helpful for relieving stiff neck muscles and soreness resulting from intense exercise. Responsible, proper use may yield a variety of benefits for you and your well-being.

SAFETY WARNINGS

Danger

1. Do not use this unit if you are using an implanted electronic medical device such as a pacemaker.
2. Do not use this unit if you are wearing any electrode medical devices used for monitoring health functions

Warning

1. If you have any of the following conditions, please consult your physician before purchasing or using this device:
   Acute conditions, malignant tumors, infectious diseases, pregnancy, implanted devices, heart disease, high fever, abnormal blood pressure, lack of skin sensation or numbness in the extremities, abnormal skin conditions or any condition requiring the active supervision of a physician.

2. Please remove the battery from the device when it is not in use.

Notice

1. Do not use this device while driving.
2. Do not use this device while sleeping.
3. Do not use this device in areas with high humidity such as a bathroom.
4. Keep this device out of reach of children.
5. Stop using this device and consult your physician at once if you feel pain, discomfort, dizziness or nausea.
6. Do not attempt to move the electrode heads while the device is in operation.
7. Do not use the device near the heart, on the head, near the mouth, genitals, or blemished areas of the skin.
8. Store the device in a cool, dry place, out of direct sunlight.
9. Store the device in a cool, dry place.
10. Dispose of batteries according to your local laws and regulations.
11. Portable and mobile RF communication equipment can affect medical electrical equipment. Exercise caution.

TRANSPORT AND STORAGE SYMBOLS

MAINTENANCE

Device

1. Please use a lightly moistened cloth to clean the device, being sure to wipe gently.
2. Ensure that the device is turned off before attempting to clean it.
3. Do not submerge or otherwise allow excessive contact between the device and water.
4. Storing the pads properly will enhance their longevity.

Pads

1. Make sure both pads not overlapping and make sure your skin is free from any dirt, oil, or lotion.
2. Applying a few drops of water before and after usage will increase the longevity of the pads.
3. Place pads on the pad holder or place the plastic film on the sticky side of the pad to keep the gel moist.

PRODUCT SPECIFICATIONS

Included in this standard package:

1. TENS device x 1 pc

2. large pad x 2pcs

3. Medium padx4pcs

4. Small pad x 2pcs

5. Electric wire x 3pcs
   (when using 4 4-line cables, make sure to use at least 1 pc white(positive) + 1 pc blue line (negative) at the time.)

6. USB cable & AC adapter x 1 set

7. Instruction manual x 1 pc

8. Collection board for pad and wire x 1 pc

9. Bag x 1 pc

Features

• Large blue LCD
• 2 outputs with 16 modes
• 20 levels of intensity
• 20-minute default timer which can be adjusted from 10-60 minutes
• Rechargeable lithium battery
• Battery charge indicator
• AC adapter 110-240V, USB Charger 5v

SETUP

Unpack the box of the product, take the product and accessories out, and connect the electrode pad to the device.

1. The device has two independent channels A&B . Make sure which channels (channel A or B or both) you want to use before you connect wires to the device.
2. Put pads on your skin before turning on the device. Use at least one pair of pads, one pad alone will not work.

1. Two output connector
2. USB port
3. LCD screen
4. Battery indicator
5. On/ off switch
6. Intensity adjustment
7. Mode selector
8. Time adjustment
9. Built-in Mode Selector
10. Pads- adhesive board
11. Charger
12. USB cable
13. Massage pads
14. Pad wires

OPERATING INSTRUCTIONS

1. Connect the pads to the wire by clipping them on, and then remove the protective film.
2. Place the pads on the desired area, and plug the wires into one of the ports on the device (Channel A or Channel B). For additional relief, use an additional pair of pads plugged into the other port on the same area. Ensure both pads are not overlapping, and that your skin is free from any dirt, oil, or lotion.
3. Turn the device on by sliding the on/off switch at the top of the unit to the ‘on’ position. The unit is now activated.
4. Press the “M” button to select a different main mode (there are 6 main modes to choose from, each main mode contains different sub-modes). Press the center button to select a different sub-mode within the current main mode. The strength setting will default to the lowest setting upon selecting a new mode.
5. Increase the intensity by pressing the + button; decrease the intensity by pressing the – button.
6. To adjust the timer, press the ”T” button. 10,20,30,40,50,60mins timers are available.The default time is 20 minutes.
7. Turn off the device.
8. Remove the pads from your skin  Gently remove the pads from your skin by pulling from the corner of the pad, then return them to the provided pads holder or protective plastic film

MODE LIST

There are 6 main modes. The “M” cycles through the 6 main modes, while the silver middle button selects options (2 to 4 varieties) within that mode.

There are 16 individual modes in total:

Kneading

1. Lateral palm kneading
2. Flat palm kneading
3.  Crosscut fist kneading
4. Vertical fist kneading
   • Acupuncture
5. Acupuncture
6. Moxibustion
7. Acupuncture kneading
   • Cupping
8. Rubbing reduction
9. Cupping
10. Fibrillation massage
    • Tapping
11. Litting-pinching manipulation
12. Vibrating manipulation
    • Shiatsu-Deep
13. Thai massage
14. Shiatsu
    • Auto-Combination
15. Auto-Combination Massage Mode
16. Auto-Combination Massage Mode 2

RECOMMENDED PLACEMENT

• LOWER BACK
  Mode 1,4,5,6,7,10,11
  Attach both pads on the lower back with the backbone in the center. Do not place on the backbone or spine

• SCIATIC
  Mode 1,2,3,4,5
  Attach on pad below and above the region in pain, both on the same side(NOT on spine)

• DELTOID
  Mode 2,3,4
  Attach one pad in front and one in back of the muscle.

• ARM
  Mode 1,2,3,6,7,15,16
  Attach both pads on either side of the area.

• KNEE
  Mode 1,2,3,4,5,6,7, 10
  Attach both pads above the knee or above and below joint.

• CALF
  Mode 1,2,3,4,5,6,7,8,14,15
  Attach both pads on the calf/leg where you feel pain. (Do not place electrode pads simultaneously to the calves of both legs.)

• ANKLE/FOOT
  Mode 1,2,14,15
  Attach pads per the illustration, on the left/ on the outside of your ankle/foot. Attach the pads per illustration on the righV on the other side of your ankle/foot

• ABS/SHOULDER
  Mode 1,4,5,6,7,10,11,12,14,15,16 Attach pads per the illustration.
  (Do not put pads on the spine)

TIPS AND MAINTENANCE

• It is suggested that you do not use the massager on any given area of skin for a duration greater than 20 min 2 times per day. Consult with your physician for longer or more frequent uses.
• Start from the lowest intensity and gradually adjust the intensity to a comfortable level on a scale from 1 to 20.
• Good skin care is important to ensure comfortable use of the device. Be sure the treatment site is clean of dirt and body lotion.
• Keeping the electrode in its case after use will extend its lifespan. The electrode is disposable and should be replaced when it loses its adhesive. To purchase additional electrodes, please contact us at support@nursal.co.

TROUBLESHOOTING

If you encounter issues with your device, consult this troublshooting guide. If you have any other questions, please contact us at support@nursal.co or 1-855-556-6888

One pad feels stronger than the other

| This is normal. Different areas of your body will react differently| Nothing needs to be done. Make sure the pads are moist and making gc:xxl contact.

The intensity feels very weak, even at the highest settings

| Pads are not attached to the bod y firmly| Attach both pads finnly to the skin
Pads are not attached to the bod y firmly| Peel off the film on the adhesive surface of pads
The transparent films are still on the pads|

Do not allow pads to overlap.

The cord is not properly connected to the unit| Conn ect cord securely into the jack
TIEntErsty s:ern toCH::Jl:Em

c:MJ” liTE at th:!Sc1TE M.

| Increase the intensity level as the sensation becomes less effective
The battery capacity is low|

Charge the battery

Skin turns red or the skin feels irritated

|

The adhesive surface of the pads is dirty or dry

| Wash adhesive surface of pads gently with your fingertips for about 3 seconds under slow running water
The therapy time is too long or the intensity is set too high| Reduce the duration of use or intensity

The electrode pad surface is worn out

|

Replace electrocle pad . Contact us.

The battery is depleted

|

Charge the battery

Power cuts off during

use

|

The battery is depleted

|

Charge the battery

The cord is broken

|

Replace the cord

It is difficult to attach the pad to the skin

|

The film on the suriace of the adhes ive pads has not been removed

|

Peel the film off the adhesive surtace of pads

The pad was app lied to wet skin

|

Dry the pad

The adhesive suriace of the pad is damaged

|

Replace the pad

Adhesive surtace of pad is not sticky

|

The pads have deteriorated

|

Contact us for replacements.

Were the pads stored in high temperature, high humidity, or direct sunshine?

|

Replace the pad.

Warranty Card

Certificate of Quality Warranty Card

Prcxluct model

| ****

SM9126N

Prcxluct name| Electronic Mini Massager

Date of purchase

|

Purchase Location

|

Retailer’s Name

|

Retailer’s TEL

|

Problems of the Product

|

CONTACT INFORMATION

• Manufactured by: Hong Qiangxing (Shenzhen) Electronics Limited Address:4F, Jingcheng Building,Xicheng Industrial Area, Xixiang Street,Bao’an District,Shenzhen, Guangdong,China
• Distributed by: OMGD INC
• ADD: 245 East Main Street,Suite 115,Alhambra,CA 91801

Made in china

WEEE-Nr: DE83395812

• support@nursal.co
• www.nursal.co
• 1-855-556-6888

WEEE-Nr: DE83395812

Made in China

FREQUENTLY ASKED QUESTIONS

How does the NURSAL SM9126N TENS Unit Muscle Stimulator alleviate muscle pain?

The NURSAL SM9126N TENS Unit Muscle Stimulator alleviates muscle pain through transcutaneous electrical nerve stimulation (TENS) technology, which sends electrical impulses through the skin to block pain signals and provide relief.

What is the price of the NURSAL SM9126N TENS Unit Muscle Stimulator?

The price of the NURSAL SM9126N TENS Unit Muscle Stimulator is $26.99, offering an affordable solution for managing muscle pain.

What are the package dimensions and weight of the NURSAL SM9126N TENS Unit Muscle Stimulator?

The NURSAL SM9126N TENS Unit Muscle Stimulator has package dimensions of 6.34 x 3.74 x 3.11 inches and weighs 11.99 ounces, providing a compact and lightweight design for easy storage and portability.

What type of batteries does the NURSAL SM9126N TENS Unit Muscle Stimulator require?

The NURSAL SM9126N TENS Unit Muscle Stimulator requires 1 Lithium Ion battery for operation, providing convenient power source options.

Who is the manufacturer of the NURSAL SM9126N TENS Unit Muscle Stimulator?

The NURSAL SM9126N TENS Unit Muscle Stimulator is manufactured by NURSAL, ensuring quality and reliability in its design and performance.

What is the model number of the NURSAL SM9126N TENS Unit Muscle Stimulator?

The model number of the NURSAL SM9126N TENS Unit Muscle Stimulator is SM9126N, facilitating easy identification and reference.

How does the NURSAL SM9126N TENS Unit Muscle Stimulator differ from other muscle stimulators on the market?

The NURSAL SM9126N TENS Unit Muscle Stimulator offers a cost-effective solution for muscle pain relief with its affordable price point, while still providing the benefits of TENS technology for effective pain management.

What should I do if my NURSAL SM9126N TENS Unit Muscle Stimulator is not turning on?

If your NURSAL SM9126N TENS Unit Muscle Stimulator is not turning on, first, ensure that the battery is properly inserted and charged. Check if there are any visible signs of damage to the device or battery.

How can I troubleshoot if my NURSAL SM9126N TENS Unit Muscle Stimulator is not providing any stimulation?

If your NURSAL SM9126N TENS Unit Muscle Stimulator is not providing any stimulation, check that the electrode pads are correctly placed on your skin and are not worn out. Ensure that the intensity levels are adjusted properly and try increasing them gradually.

What should I do if my NURSAL SM9126N TENS Unit Muscle Stimulator is emitting an unusual odor during use?

If your NURSAL SM9126N TENS Unit Muscle Stimulator is emitting an unusual odor, immediately discontinue use and unplug it from the power source. Check for any signs of overheating or damage to the device.

How can I troubleshoot if my NURSAL SM9126N TENS Unit Muscle Stimulator is causing discomfort during stimulation?

If your NURSAL SM9126N TENS Unit Muscle Stimulator is causing discomfort, first, ensure that the electrode pads are clean and properly positioned on your skin. Adjust the intensity levels to a more comfortable setting and try using a different mode of stimulation.

What should I do if my NURSAL SM9126N TENS Unit Muscle Stimulator is not charging or holding a charge?

If your NURSAL SM9126N TENS Unit Muscle Stimulator is not charging or holding a charge, check the charging cable and ensure that it is securely connected to the device and power source. Try using a different charging cable or power outlet.

How can I troubleshoot if my NURSAL SM9126N TENS Unit Muscle Stimulator is displaying error codes on the screen?

If your NURSAL SM9126N TENS Unit Muscle Stimulator is displaying error codes, refer to the user manual for troubleshooting instructions. Error codes may indicate issues such as electrode pad connectivity problems or low battery levels.

What should I do if my NURSAL SM9126N TENS Unit Muscle Stimulator is not responding to button presses?

If your NURSAL SM9126N TENS Unit Muscle Stimulator is not responding to button presses, check for any debris or damage around the buttons that may be obstructing their function. Try pressing the buttons firmly and directly.

What should I do if my NURSAL SM9126N TENS Unit Muscle Stimulator is heating up excessively during use?

If your NURSAL SM9126N TENS Unit Muscle Stimulator is heating up excessively, immediately turn off the device and unplug it from the power source. Allow the device to cool down completely before attempting to use it again.

DOWNLOAD THE PDF LINK:NURSAL SM9126N TENS Unit Muscle Stimulator User Manual

REFERENCE:NURSAL SM9126N TENS Unit Muscle Stimulator User Manual- Device.Report

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>