ITC VersiColor RGB W Lighting User Guide
- June 1, 2024
- ITC
Table of Contents
VersiControl
Quickstart Guide
How To Control Your
VersiColor™ RGB(W) Lighting
DEC2023
INITIAL SETUP – FINDING DEVICES
Upon starting the VersiControl App for the first time, you will encounter a series of set-up screens to find and connect to your control devices.
Tap ‘Find Devices’ to initialize search|
---|---
The app will begin scanning for on board devices and display the available
devices once
located Select ‘Tap to claim!’ to connect app to the device|
During initial setup, you’ll be asked to set a passcode to claim the device
Tap ‘Set Passcode’ to set up a passcode
NOTE: Be sure to store the passcode in a secure place for future
reference|
Once you’ve successfully set a passcode you’ll receive a ‘Success!’
notification
Tap ‘Go to Dashboard’ to leave the initial set-up screen and move to the app
dashboard|
ZONE DASHBOARD OVERVIEW
CONTROLLING ZONES
CHANGING COLOR
SELECTING COLOR WITH CAMERA FEATURE
| 1: From the Palette screen, tap the symbol to use your phone’s built-in
camera to capture an image of a
color to match to your lights.
---|---
|
2: On the image capture screen, zoom in on your desired color and press
the capture button to take the picture.
Tap cancel to abort and return to the palette screen.
|
3: Slide the color selection circle around the image to choose the perfect
color and 4: tap ‘Accept’ to change the light color of all the selected
zones.
Tap cancel to abort and return to the palette screen.
SPECIAL EFFECTS MODE
| 1: With all desired zones selected, 2: tap the symbol to
move to the effects mode screen to add an effect to all the actively selected
zones.
---|---
| 3: Select a preset effect or choose 4: ‘New Custom
Effect’ to create your own and assign a name to your custom effect. 5:
Choose the speed of the effect, then 6: tap ‘Accept’ to enable the effect
on all actively selected zone.
| 7: To stop all effects, tap the effects indicator in the
status bar. Tap yes to stop all effects.
8: To stop effects individually, tap the effects indicator on the zone
and tap yes to stop effect.
MUSIC-BEATS CONTROLS
| 1: With all desired zones selected, 2: tap the
symbol to move to the the music beats mode
screen to enable your lights to react to the beat of the music.
---|---
| Upon selecting music beats mode for the first time, you’ll
have to give permission to access your phone’s microphone.
3: Tap ‘OK’ to allow access to microphone input.
| 4: Once music is playing, the beat indicator circle will
react to the beat of the music. 5: Tap ‘Accept’
to enable the beat mode or cancel to abort.
CONTROLLING ON/OFF TIMER
Note: Once activated, the timer will remain active without the presence of phone until time expires.
| 1: With all desired zones
selected, 2: tap the symbol to move to the the timer mode screen to set a
Power On or Power Off Timer on your actively selected zones.
---|---
| 3: Rotate the clock slider to
the desired time, 4: choose to power on or off, 5: confirm your
selection,
6: then choose start to enable the timer on each of the selected zones.
| Once enabled, the timer countdown
will display on each zone. 7: All timers can be stopped together by
tapping the timer symbol on the zone status bar. 8: Each individual zone
timer can be stopped by tapping the zone specific timer.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>