TAC 4S-19D1032-1 Side Steps Running Boards Instruction Manual
- June 1, 2024
- TAC
Table of Contents
TAC 4S-19D1032-1 Side Steps Running Boards
Product Information
Specifications:
- Product Name: Upgraded 4 Oval Straight Sidebars
- Compatible Vehicle: 2019-2024 Dodge Ram 1500 Quad Cab (Excluding 19-24 Ram 1500 Classic)
- Part Number: 4S-19D1032-1
- Manufacturer: TAC Auto Parts
- Materials: Steel
- Finish: Powder-coated
Product Usage Instructions
Parts List:
- 1 Driver/left side Upgraded 4 Oval Straight Sidebar
- 1 Passenger/right side Upgraded 4 Oval Straight Sidebar
- 12 8-1.25mm x 25mm Combo Hex Bolts
- 18 8mm x 24mm x 2mm Flat Washers
- 6 Mounting Brackets
- 18 8-1.25mm Nylon Lock Nuts
Installation Procedure:
- Remove contents from the box and verify all parts are present.
- Start the installation under the passenger side of the vehicle.
- Select a Mounting Bracket and attach it to the factory studs using washers and lock nuts.
- Install the Mounting Brackets in the center and rear mounting locations along the body panel.
- Place the Sidebar on top of the Brackets, ensuring not to slide or rotate it.
- Attach the Sidebar to the Brackets using Combo Hex Bolts but do not tighten hardware yet.
- Level and adjust the Sidebar as necessary and then fully tighten all hardware.
- Repeat the above steps for the Driver/left Sidebar installation.
- Perform periodic inspections to ensure all hardware remains secure and tight.
To protect your investment, wax the product after installing. Regular waxing is recommended to add a protective layer over the finish. Avoid using polishes or waxes that contain abrasives as they could damage the finish. Mild soap can be used to clean the Sidebar.
Frequently Asked Questions (FAQ):
-
Q: Can these sidebars be installed on a different vehicle model?
A: These sidebars are specifically designed for the 2019-2024 Dodge Ram 1500 Quad Cab and may not fit other vehicle models. -
Q: Do I need special tools for installation?
A: Basic tools such as a wire brush, wrenches, and sockets are required for installation. Assistance from another person is recommended for certain steps. -
Q: How should I maintain these sidebars?
A: Regular waxing is recommended to maintain the finish and protect the product. Avoid using abrasive cleaners or polishes that could damage the surface.
INSTALLATION INSTRUCTIONS
UPGRADED 4” OVAL STRAIGHT SIDEBARS
2019-2024 DODGE RAM 1500 QUAD CAB (EXCL. 19-24 RAM 1500 CLASSIC)
PART# 4S-19D1032-1
UPGRADED 4” OVAL STRAIGHT SIDEBARS 2019-2024 DODGE RAM 1500 QUAD CAB (EXCL. 19-24 RAM 1500 CLASSIC)
PARTS LIST
1| Driver/left side Upgraded 4” Oval Straight Sidebar| 12| 8-1.25mm x 25mm
Combo Hex Bolts
---|---|---|---
1| Passenger/right side Upgraded 4” Oval Straight Sidebar| 18| 8mm x 24mm x
2mm Flat Washers
6| Mounting Brackets| 18| 8-1.25mm Nylon Lock Nuts
INSTALLATION INSTRUCTIONS
PROCEDURE:
REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ INSTRUCTIONS
CAREFULLY BEFORE STARTING INSTALLATION. ASSISTANCE IS RECOMMENDED.
-
Start the installation under the passenger side of the vehicle. Locate the front (3) factory studs along the inner side of the body panel, (Figure 1). Use a wire brush or thread chaser die to remove excess paint or undercoating from threaded studs as necessary.
-
Select (1) Mounting Bracket.
NOTE: All (6) Brackets are universal and will fit left or right side. Attach the Mounting Bracket to the (3) factory studs with (3) 8mm Flat Washers and (3) 8mm Nylon Lock Nuts,(Figures 2 & 3). Leave brackets loose at this time. -
Repeat Steps 1 & 2 to install the Mounting Brackets in the center and rear mounting locations along the body panel, (Figures 4—6).
-
Carefully unwrap and select the Passenger/right Sidebar. Use the illustration above to help identify the correct Sidebar. Place the Sidebar on top of the Brackets. IMPORTANT: Do not slide, (front to back or rotate), the Sidebar on the Brackets or damage to the finish on the Sidebar may result.
-
Attach the Sidebar to the Brackets with (6) 8mm Combo Hex Bolts, (Figures 7—10). Do not tighten hardware at this time.
-
Level and adjust the Sidebar as necessary and fully tighten all hardware.
-
Repeat Steps 1—6 for Driver/left Sidebar installation.
-
Do periodic inspections to the installation to make sure that all hardware is secure and tight.
To protect your investment, wax this product after installing. Regular waxing is recommended to add a protective layer over the finish. Do not use any type of polish or wax that may contain abrasives that could damage the finish. Mild soap may be used also to clean the Sidebar.
Passenger/right Side Installation Pictured
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>